How do you swap an image in the timeline but keep the in/out points and opacity settings?
Hi There,
We have a file which consists of a bunch of still images that get updated each year - the edits never change.
Is there an edit type that will allow us to swap the images our for new ones but keep the in/lout points and opacity changes? We've looked at all the edit types (overwrite, insert etc) but they don't seem to swap stuff out.
We had also been naming the new files the same as the old ones and reconnecting the media but this is now causing issues.
Any help or pointers in the right direction would be much appreciated.
Cheers
Ben
Click on the new image in the browser, so that it is selected, and the type Command + C to copy it.
Next, click on the clip in the timeline that you want to replace with the image you just copied (preserving your in and out points and opacity settings) and type Option + V to bring up the Paste Attributes Dialog Box.
In the Paste Attributes Dialog box, check the box for Contents and leave the remainder of options unchecked.
Uncheck the Scale Attribute Times option as well.
Click OK, and the image should now be replaced on the timeline with the in/out and opacity changes preserved.
MtD
Similar Messages
-
I have downloaded some videos to my ipad via my SD card now my storage is full, how can I transfer the videos off my ipad to clear the storage but keep the videos on another media device (external hard drive)?
There are some wireless external hard drives that can be used with the iPad.
Best iPad External Hard Drive Storage Options
http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
iPad Storage Solutions
http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
Cheers, Tom -
If my Ipad was stolen, I had erased all the data, but keep the Ipad on my account - nobody can use it without my permission?
If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
How to Find a Missing iPad with FindMyiPad
http://www.dummies.com/how-to/content/how-to-find-a-missing-ipad-with-findmyipad .html
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
Check the serial number (located on back/bottom) in this lost/stolen iPad database. However, most owners are not aware of this database and don’t enter the serial number.
Stolen iPad Database
http://www.stolenlostfound.org/online-stolen-ipad-database
Also do a search, using the serial number, on your local Craig’s List. Some users list the serial number of a stolen iPad to thwart the sale of a stolen device.
Cheers, Tom -
Hi, Excuse my English, I'm using imovie 11, I want to delete a clip video at the end of the project, but keep the audio over the fade to black, everytime I delete the video, the audio is also deleted, please help!
I assume you are trying to end the clip/project with a fade to black, or something that just doesn't cut so instant.
One thing i'm thinking you can try is to Add a "Transition Clip" to the end, and try your first method. (with Detached Audio + Delete Selection. (Yellow highlight was deleted selection) Do you need something to end like this?
If you can, put screenshot up (Shift+Comm+4), if i'm not on the right idea. It seems like an easy fix, with a few ways of doing it. You can also add a blank image to end project, sub titles or Add,Cutaway fade +Opacity adjust. -
Switch image in a layer but keep the layer mask
Hi, I`m trying to swich a image on a layer whit a layer mask. I whant to keep the layer mask but change the image. When I paste a copyed image it the laye it creates a hole new layer. How can I change a image but keep the layer mask?
Tanks LasseYou have things backwards: You copy&paste the layer mask and/or duplicate a selection by loading it using Ctrl+click on the thumbnail, then creating a new mask from it. After that you can delete the original layer. Also more recent versions allow drag&drop replacement of this stuff, but you have to be careful which thumbnail you drag...
Mylenium -
My daughter currently uses my Apple ID. How do I set her up her own ID but retain the music she has purchased?
You cannot associate previous purchases with a new ID.
A specific answer as to how to otherwise share media will depend upon your computer setup, about which we currently have no idea. Do you have more than one, at they networked, does she use the media on an i-device? -
How do you make an image enlarge on hover, like on the new google image search?
Here's an example:
http://www.google.com/images?hl=en&source=imghp&biw=1109&bih=690&q=cat&gbv=2&aq=f&aqi=g10& aql=&oq=&gs_rfai=
When you roll over the image it enlarges. I like it because you don't have to click anything, and you hover over a bunch of images without refreshing the page or having an obnoxious popup you have to close.
Is there a ways to create this in dreamweaver? Do you have to make 2 different image sizes (like in the dijointed rollovers)?
Thanks! I love this forum!
KateYou have to insert a rollover object. Not sure what version you are working in. But you should have the option to select "insert", "Rollover Object" then you followi the guide. You will need to create 2 copies of your image - one that is smaller that will be your thumbnail and then the larger image. The first thing you will be asked for is an image ID - give it whatever name you want, but I recommend lowercase letters only. The 2nd thing will be to insert your thumbnail as a jpg and the you insert the larger image, again as a thumbnail. Don't forget to gill in the alternate id name as well - can be the same as your original id name.
THIS IS IMPORTANT
After you insert the image you must switch to code view and delete the size parameters that appear after the image.
I hope this makes sense...but if you need further help....just ask. -
I've got a photo that was shot at a crooked angle which I tried correcting using the Straighten tool in CS5 Extended but the straightened version crops out far too much of the image for my liking. So I manually rotated and cropped the photo so that it's straight and still includes what I want it to but of course I was left with large white spaces on all four corners of the photo. After a lot of work I was able to fill in all the white spaces manually using the clone stamp and it looks fine the way it is now on my monitor but when the image is lightened even slightly many obvious cloning flaws begin to show and I'm afraid that people with monitors that display the image lighter will be able to see the obvious cloning work I did.
So what I'd like to do is apply a layer or mask or filter that uses the Shadows/Highlights feature to lighten the image enough to expose everything and then use that lightened over-exposed version to make the necessary fixes with the clone stamp tool and fix all the flaws that show when the image is lighter -- then, after having fixed the cloning flaws, I'd like to get rid of the Shadows/Highlights layer/mask/filter so that the photo goes back to its original exposure, except this time with the flaws fixed. I'm still fairly new to CS5 and I haven't found a way to do this yet. So far every time I apply Shadows/Highlights using a layer or filter I either can't do the cloning work on the lightened image or I can but then it won't let me get rid of the Shadows/Highlights after the cloning work is done.
Is there any way around this?
Thanks in advance for any help!Try using the new Edit - Fill - Content Aware feature to fill corners exposed by the rotation. Select first, taking a few pixels of the image as well in the selection, then try the fill. You may need to touch things up a bit after, but I'm betting it will get you there more quickly than with manual cloning.
I tried this but unfortunately kept getting the error: "Could not fill because there's not enough data to fill it in a Content-Aware manner."
My solution is a custom bright color profile that I toggle with Ctrl + Y which is a shortcut for Color Proofing.
Here's how to do it.
Edit > Color Settings (Shift + Ctrl + K). In the Working Spaces section, using the RGB menu, scroll up and choose Custom RGB...
For the name type myBrightRGB , change the Gamma to 0.75, and press OK
From the same RGB menu, scroll up and choose Save RGB... and save the profile in this location C:\Windows\System32\spool\drivers\color
Click the Cancel button in the Color Settings
With an image open, go to View > Proof Setup > Monitor RGB, then View > Proof Setup > Custom... and from Device to Simulate menu choose myBrightRGB profile and press OK.
From now on toggle the Color Proof with Ctrl + Y to edit your image in the prefered color space.
This is also a perfect solution for checking how images will look on overbright miscalibrated displays.
Sounds like a great solution, however after following all those steps I'm not seeing an option for "myBrightRGB" anywhere in the drop down menu next to Device to Simulate. I tried restarting Photoshop, still not there. I did notice that in the C:\Windows\system32\spool\drivers\color folder that "myBrightRGB.csf" was the only csf file in there -- all the rest of the files in that folder are ICC files. Not sure if that makes a difference as far as this is concerned. When I go to View > Proof Setup > Custom, the Customize Proof Condition window has an option to "Load..." and I tried selecting the myBrightRGB file that way but it'll only load .PSF files. Is there something I'm missing? -
2 ipod touches, 1 iphone, 1 ipad all linked to the same itunes account. would like to know if there is a way to have 3 seperate accounts and still keep the music/apps purchased to date. 1 ipod has been lost....how do I delete it from the itunes account. Is homesharing something that i can use for this situation?
any help is much appreciated!You cannot
-
How can I insert a logo into my signature but keep the typed signature?
I want to type info & also insert my logo
Example:
Carl Clouser
Director of Sales
TRYST Electronic Smoking Products
[email protected]
724-679-4212
www.enjoytryst.com
www.facebook.com/enjoytryst
www.twitter.com/enjoytryst
Insert logo here
plus I want the links to be hyperlinks which can be clicked onHello,
See here information about signature:
*[https://support.mozilla.org/en-US/kb/signatures Signatures] -
How do I fix the timeline so both the images and the timeline are 1080p?
Hello everybody. I'm a relative newbie to FCP, but not totally new to the world of video editing. I've got a problem that I hope somebody out there can assist me with.
I've shot a lot of footage in HD (1080p) and have imported everything into a timeline. I've performed all my edits, transitions, music integration etc - now when I go to output the footage I realise I've made the mistake of doing everything in a 576p timeline.
I've figured out how to resize the timeline, but all the clips appear in their original 576p resolution in the middle of the canvas (ie huge bars around the image)..
My question is simple enough.. How do I fix the timeline so both the images and the timeline are 1080p? Is there a method to 'resize' all the clips to the new timeline? Will this resize the 576p clips or will they still be native 1080p?
If importing all those clips into the original timeline has destroyed pixels, then resizing to 1080p is definately not what I want to do. I want to retain all the resolution of the original clips.
Any advice would be very much appreciated. I've created nearly 300 edits in this timeline, not including all the effects and transitions. If I have to redo all this because I set up the timeline incorrectly I'm going to be rather upset!
Thanks everybody.If you captured the footage as 1080 then the fastest way to re-size all the clips back to 1080 is to select all the clips on the time line and then in the menu bar go to Edit -> Remove Attributes. This will pop up window asking which attributes you want to remove. I would try checking the Basic Motion and Distort attributes and click OK. This should pop everything back to their original size and shape.
However, this will also remove any re-sizing or distortion that is intentional (ie to blow up a particular clip so you can focus on something). -
I have an image of bracelet with a tube in the middle and need to erase the tube but keep the bracelet to make it look as though the tube was never there, what's the best tool in CS6 to use
Look at the Content Aware Patch, Healing Brush, and Spot Healing Brush tools.
Photoshop Help | Content-Aware Patch and Move
Nancy O. -
Hide grand total field on ALV report, But keep the sub total fields
Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document.Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document. -
How do you add an image in the signature
Hi,
How do you add an image to the signature area.
The Insert/edit image is not available when in My Settings | Personnel Info | Signature
Regards
Ray FarmerYou need to link the image. See the example for the Canada flag below.
<img src="http://forums.ni.com/ni/attachments/ni/130/6908/1/Canada-small.PNG" border=0>
Replace with the image you like. This goes into the signature box within the profile tab of the personal settings.
RayR
Maybe you are looking for
-
Wireless speed difference with WEP and WPA2?
I am connecting to my FiOS router wirelessly, since I was new on wireless networking, I did lots of reading they all say WEP encryption is flawed, and WPA2 should be used instead. So I changed the router's default WEP to WPA2 the same day I got FiOS
-
hi everybody..... i have just made my structure using the OM plan, and i entered some data in it like cost center, address, work schedule, area, subarea and many other things. all i want is to read these data while i'm hiring someone or while i'm sho
-
I ordered the new Iphone 6 and it will ship on 10/31, on 10/15 I completed the paperwork to return my iphone 4 8GB, but it appears when my paperwork was emailed to me and I didn't notice until today. It has my return phone listed as an iphone4 16GB.
-
Which Safari Extension do I need to look at Kroger Digital Coupons?
It tells me I can't open the download until I enable the extension in Safari, but doesn't tell me which extension I need...I just want to download the digital coupons for this week.
-
Printing all PDF files in a folder in file name order
When I do a select all and then Print the PDF files selected are printing in a random order. Is there any way to have them print in the order that they appear in the folder (Listed by name)? Thanks