How do you switch between 64 bit and 32 bit? (Win 7)

I have searched here, Adobe Support, read the User Manual, and can not find any information on how one changes from 64 bit to 32 bit. I am trying to create Time Lapse sequences and CS 5 tells me I have to be in 32 bit mode. How do I get there? I am running an HP Pavilion dv7t-3300 i7 QuadCore with 4gb RAM and Windows 7 Pro 64 bit.

Similar concern here. No 64 bit version. I purchased the Photoshop CS5 downloadable upgrade. I have installed the program but only see the 32 bit version. Image / Mode shows 8, 16 and 32 bit versions and no 64 bit.
Start Programs offers only a single version of Photoshop which based on the splash screen is 32 bits. Did I miss something during the install?
Bob

Similar Messages

How do you change between 12 and 24 hour format on ipad

how do you change between 12 and 24 hour format on ipad

Check: Settings - General - Date & Time - 24-Hour time = On/Off

How do you switch between 64-bit and 32-bit Java configuration?

I've downloaded the latest Java plug-in for an online service, but when I go to run the service on Safari or Firefox browsers, I get a message that 32-bit Java is needed and my machine is running 64-bit. How do you switch back and forth?

Similar concern here. No 64 bit version. I purchased the Photoshop CS5 downloadable upgrade. I have installed the program but only see the 32 bit version. Image / Mode shows 8, 16 and 32 bit versions and no 64 bit.
Start Programs offers only a single version of Photoshop which based on the splash screen is 32 bits. Did I miss something during the install?
Bob

How to quickly switch between straight and curly quotes?

I've recently moved from a Windows XP machine with MS Office to a Mac Pro with Pages.
For the kinds of documents I typically work on, sometimes I need to have straight quotes, and sometimes curly quotes. With MS Word, I was able to create a couple of macros that would switch these preferences for me. With these macros linked to an icon in the toolbar, switching between straight and curly quotes was as easy as clicking a button.
Now I'm looking for a way to do this -- or something like it -- with Pages.
I know how to switch back and forth using the preferences menu, of course, but I'm looking for something quicker and simpler, since I often have to make this change several times a day.
Can Automator do something like this? Or is there another way?
-- Eric

Turn off the auto correction and you can type Curly quotes with:
left single ‘ option ]
right single ’ option shift ]
left double “ option [
right double ” option shift [
If you want the French quotes « and » they are option and option shift |
Peter

A540 How do I switch between HDMI and PC inputs?

When I have an HDMI source plugged into the A540, I haven't been able to figure out how to switch between HDMI and PC inputs. How is this accomplished?

You can browse the other store but unless you have a credit card and billing address in the other country you will not be able to purchase.
All prices are in the local currency of that country that you are browsing.
MJ

How do you communicate between flash and java?

Hi,
How can you pass parameters between a Flash movie and a Java applet running on the same machine? I would like to do this without opening a new browser window or putting parameters in the url of the browser window that is running the Flash movie.

Flash supports Javascript , check out actions.
set the URL like you would the Javascript for
making a method call from a webpage.
make sure that Scriptable <PARAM> has been set to true.

How do you switch the x and y axis in a line graph?

I am fairly new with this program and I need to make a line graph for a science lab report. For the lab, we needed to use a certain amount of water, which was 20 ml, 40 ml, 60 ml, then 80 ml, and we needed to measure the mass of different substances if they had the given values of the volume, and compare their mass and volume in a line graph.
Therefore, the graph that I need to create requires a constant 4 steps, which are always 20 ml, 40 ml, 60 ml, and 80 ml, for all of the four substances I used during the experiment. That needs to be on the y axis. I need to have the mass of the substances on the x axis, but no matter what I have tried I cannot seem to switch the x and y axis...how can I do that?

Nevermind I figured it out

How do you switch between web server snapshot jpg and png modes?

I read in another forum a posting by "NathanK" stating:
"The snapshot feature of the web server can
generate images either as png or jpg. In LabVIEW 8.6 and later, the
default which is generated by the web publishing tool is the png
format. In this mode everything happens in memory so there is no
snapshot image file generated.
In the jpg mode there is a
temporary file, however it is not always the same file and the file is
deleted after it is uploaded to the client. I would not recommend
trying to use this programmatically.
If you need more
control over a snapshot of a front panel (and you are using 8.6), I
would recommend making a custom web service that takes a picture of a
VI's front panel and returns it to the client. Then you would have
control over the image."
I am currently using the web publishing tool snapshot feature with an EXE program written in LV8.6. However, each time a browser accesses the html file, the EXE file's memory grows by 72KB (this happens with my custom EXE program and with LabVIEW.exe when running the VI in development mode). I'm assuming this is the png that is generated each time a snapshot is taken, but the program never de-allocated the memory and the program eventually crashes. I'm aslo assuming that if I switch to "JPG mode", the web server will generate a temporary file and eventually delete it, elminating the memory leak. The problem is, I don't know how to change the modes from png (default) to jpg.

I am and have been using the .snap function on many applications since LabVIEW 6.1. It's very simple, easy to use, does exactly what I want it to do, and is still in the documentation of LabVIEW 8.6, 2009 and 2009 SP1 as being supported.
If I am not mistaken, don't you need to have the LabVIEW runtime engine on the target system to use embedded mode? I don't want to have to try and keep everybody who wants to see a screenshot of my program to have to have a run-time engine installed. For one reason, I don't know everybody who wants to monitor our system and they literally can be anywhere in the world if the VPN to our network. Second, those who I do know would would have me install it for them. Third, why go "backwards" in capability...everybody would ask me "Why do we have to do this now?..we never had to do it before", and I don't want to use my time/energy at work to explain why NI cannot fix a memory leak that has been identified in at least the last 3 versions of LabVIEW and is still not fixed.
I had been using either LV 6.1 or 7.1 for a good part of 10 years and had very few problems with them (BTW, DAQmx is the greatest thing every put on a computer EVER). I finally make the transitioin and start using LV 8.6 on a major test platform last year, got to the very end of it and find this out. <sigh!>
It is funny (maybe not), but my work around feels like I just changed the floormats in my Toyota car to keep it from "crashing".
However, if I am mistaken and you do NOT need to use LV runtime engine for embedded mode, ignore everything I wrote above and please let me know that this is the case and I will look into it.

How do you switch between JRE v1.4.x and v1.5.x

Java 2 Runtime Environment, v1.5.0_02-b09 Control Panel doesn't appear to let user switch back to a 1.4.x version. Hoping someone can can me how to do this.
I have an application that uses JRE 1.4.2 and does not allow user into the interface until they switch their configuration to the 1.4.2 version by going to Start > Settings > Control Panel > Java Plug-in, selecting the Advanced tab and choosing the 1.4.2 version from the pull down provided in the Java Runtime Environment Section. This process worked fine if the user had v 1.4.x or lower, but does not work now that users have v1.5.x due to the changes in the Control Panel. Does anyone know the equivalent procedure with the new 1.5.x Control Panel so user can specify 1.4.x? (I did play around with the setting in the Java tab, Java Application Runtime Settings section to no avail.) Thanks.

We have had backwards compatibility problems before and must ensure that the product we deliver works for our user community due to the nature of the product. We have compiled our code with 1.4.2 and test internally with 1.4.2_04. In addition, the product that we deliver is in maintenance mode and is not currently funded for development/updates - just need to let the users who have updated to 1.5.x know how to switch back and forth between 1.4.x and 1.5.x. Currently, I can only tell them to remove 1.5.x, which is not desirable.

How do I switch between number and alphabet on printer keypad when trying to connect new router.

HP wireless printer 6500 e709n
Have a new router. Using the printer tools, and network setup, printer can find router but when I input the password using the keypad, alpha characters appears and therefore rejected. Password is numeric. The password cannot be changed because it is provided by ISP and is unchangeable, as far as I know.
I've checked the user manual and there is no mention of how to change between using the 6500 e709n keypad in alpha and numeric mode.

Hi hessvette,
When the keyboard appears on the printer display, there should be a ARROW pointing up or a TRIANGLE. Press that, and the entire keyboard changes into CAPS. To enter lower case you need to tap the appropriate letter key twice quickly. The first tap should show a capital and the second should show a lower case letter.
If it is an older type printer with a keypad then you would have to cycle through the letters and numbers. Lets say you want to enter the number '2'. Keep pressing the number 2 button. It will cycle through all the options for that button, ie A,B,C,a,b,c and the 2. You do the same for the other buttons.
I am sending a link for Installing the Printer on a Wireless Network.
Let me know if this helped.
Thank you,
I worked on behalf of HP.

How do I switch between satellite and apple tv?

I am proud I hooked up my Apple TV, (tech dummy), but now I can't switch back to satellite for other programming. Do I have to disconnect and start over? I did not use "input" on TV before installing. Can't, or don't know how, to do it now. How do I do this? Apple TV works well! I'm afraid to take it apart.

Depending on how your satellite connects to your tv you will need either your sat. remote or your tv remote to switch it back to the correct input for that. For instance my HDTV has a coax input for my satellite and I have to switch to HDMI input for my AppleTV. I either need more information to walk you through it more or you can start punching buttons. That should be the readers digest version though.

How do you differentiate between indexed and non-indexed prompts?

Hi,
I'm trying to fill Webi parameters dynamically, using the Webi REST SDK (4.1 SP04). This environment runs on top of SAP BW and uses BICS to connect to the BEx query.
When the prompt is implemented as a BEx variable, the call to GET /biprws/raylight/v1/documents/{docid}/parameters will show @type: sapVariable, which tells me it requires the values to be passed as an ID and (optionally) their description.
Prompts that are defined in the Webi query panel, return @type: prompt. This however doesn't indicate if they need the prompt value IDs or just their plain values.
Example (JSON):
"parameters": {
    "parameter": [
        "@dpId": "DP0",
        "@type": "prompt",
        "@optional": "false",
        "id": 2,
        "technicalName": "psTestPrompt",
        "name": "TestPrompt",
        "answer": {
          "@type": "Text",
          "@constrained": "false",
          "info": {
            "@cardinality": "Single",
            "lov": {
              "@refreshable": "false",
              "@hierarchical": "false",
              "id": "UNIVERSELOV_DS0.DO1a6"
In this case, I'll look at the value for @refreshable; if it's true, the prompt requires IDs, if false, just the plain values.
It's only when a prompt does not have an LOV associated with it (disabled in the prompt properties, see screenshot below), I won't have the lov information when retrieving the parameter information and thus won't be able to determine whether to pass value IDs or just plain values.
FYI, replying with prompt value IDs looks something like this:
"parameters": {
    "parameter": [
        "id": 2,
        "answer": {
          "values": {
            "value": {
              "@id": "000000123456",
              "$": "123456"
Plain values looks like this:
"parameters": {
    "parameter": [
        "id": 2,
        "answer": {
          "values": {
            "value": 123456
In short: how do I determine whether to pass values by ID or just their plain value given the prompt template retrieved through a GET /biprws/raylight/v1/documents/{docid}/parameters call?

Hi Anthony,
Just FYI, I've also noticed that when you have 2 BEx variables, and you only define 1 of them as a prompt (using the BEx variable window in the Webi Query Panel), the REST SDK will still report all of BEx variables as prompts, instead of the 1 variable that was checked as prompt.
(this happens in BI 4.1 SP4 Patch 4)
In the query panel:
Uncheck Use BEx query defined default values at runtime
Uncheck the Set as prompt checkbox for the second variable.
REST SDK output for GET /biprws/raylight/v1/documents/{docid}/parameters?lovInfo=false :
"parameters": {
    "parameter": [
        "@dpId": "DP0",
        "@type": "sapVariable",
        "@optional": "false",
        "id": 0,
        "technicalName": "ZMXXXX",
        "name": "XXXXX",
        "answer": {
          "@type": "Text",
          "@constrained": "true",
          "info": {
            "@cardinality": "Multiple",
            "lov": {
              "@refreshable": "true",
              "@hierarchical": "true",
              "id": "UNIVERSELOV_DS0.:M:STR:ZMXXXX"
        "@dpId": "DP0",
        "@type": "sapVariable",
        "@optional": "false",
        "id": 1,
        "technicalName": "ZYYYYYY",
        "name": "YYYYYYYY",
        "answer": {
          "@type": "Text",
          "@constrained": "true",
          "info": {
            "@cardinality": "Multiple",
            "lov": {
              "@refreshable": "true",
              "@hierarchical": "true",
              "id": "UNIVERSELOV_DS0.:M:STR:ZYYYYYY"

How do you switch between jpanels in a jframe?

I have, what seems, a relatively simple question; however I cant find a solution to it anywhere!
I have a jframe with a jmenubar which has 4 menu items. When each item is clicked a new JFrame is displayed with certain content. What I am trying to do, instead of creating a new Jframe each time a menu item is clicked, is display all jpanels within the current jframe. When different menu items in the jmenu are clicked it "switches" the main jpanel to display the required content.
So basically I want 1 JFrame, which has 4 JPanels, (alhough only 1 is shown at any given time). When a menu item in the jmenubar is clicked the JPanel which corresponds to the menu item is displayed on the jframe.
If your still confused, I basically want jtabbedpane functionality only I want to control the switching through tabs via the jmenubar (and I dont want the jtabbedpane tabs obviously).
Thanks

Myles wrote:
Okay that seems obvious ;)
What do you mean by "validating the content pane" though?
Thanks for your quick reply.Containers have a method called validate() which will update them when components are added and removed. Without this, you won't see added components.
And yes, you can have more than 1 container. JPanels are containers themselves and can have components added and removed from them as well. You only have one content pane in the JFrame, but you could add two JPanels to this, one static and one to act as your swapping container.

How do I switch between http and https?

I need to be able to show a majority of a portal in http, but need to have a couple of pages/portlets use https. Does anyone know how I can setup certain items to use https and also have it automatically switch back to http for those items that don't need to be encrypted?
Any information would be great!

Here's what I've got in my web.xml. Note that all I'm trying to do here is replicate the functionality that was provided in WLPortal 4.0 with the HTTPS_URL_PATTERNS parameter in the old web.xml.
web.xml section
<security-constraint>
<display-name>SSLResources</display-name>
<web-resource-collection>
<web-resource-name>SSLResources</web-resource-name>
<description>Resources requiring SSL</description>
<url-pattern>/appmanager/ctdportal/retail</url-pattern>
<url-pattern>/appmanager/ctdportal/admin</url-pattern>
<url-pattern>/appmanager/ctdportal/cos</url-pattern>

</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
---------------------------------------

Grid lines in numbers, how do you switch them on and off?

I am having trouble getting the grid lines to show in numbers, the format has grid lines highlighted in blue but switching this off or on has no effect on grid lines in the sheet

Hi algebra,
I got an email notification of your reply, but this page has not yet updated. This forum software sometimes is out of sync with the emails.
Numbers 3.2
Click on the 'bullseye' top left of the table to select the whole table
In the format panel on the right of the Numbers window, click on Cell
Border > Line style, Width (I prefer 1pt), Colour (I prefer Black) , border pattern (I prefer to set them all the same, see below)
Regards,
Ian.

How do you switch between 64 bit and 32 bit? (Win 7)

Similar Messages

Maybe you are looking for