How do you tell assets "Don't Transcode" in Encore CS5?

Here's the workflow: Create a project in Premiere CS5 (original source AVCHD 1hour 15min clip with titles at the beginning). Create DVD image, discover error in the title, about 1 minute into clip. OOPS! Trying to save TIME, in Premiere, cut, create new sequence with ONLY the bad 1 minute. Dynamic-link into Encore and create M2V transcode of the one minute.
Back to Premiere...import the transcode (M2V/AC3) of the original sequence. Leave AC3 alone, chop the video at 1M0Sec1Frame and drop in the transcode (M2V) of the corrected title sequence.
I now have "DVD legal" footage of the entire sequence and a perfect virtual butt-splice of the video. When I go back to Encore it should NOT have to re-transcode this footage, and the MANUAL (p. 46) indicates that the "untranscoded" setting can be set to "don't transcode" BUT THERE'S NO MECHANISM FOR DOING THIS! Now...truth be told, the transcode is relatively quick since it's basically just copying the frames from one M2V file into another one...BUT I SHOULDN'T HAVE TO TRANSCODE THIS! Problem is, I don't see where the setting is anywhere in Encore to say "Hey, idiot program...leave this footage alone! It's already transcoded!" Help...?

HI,
usually program aren't idiot.
Techs spend much time and strenghts in creating them and titling them idiot is not pretty.
Also if we pay tons of money to buy them.
But, yes, programs can do quirks.
So, anyway:
Project window/ left click over the file you do not want to be transcoded, a window appear and you can choose every setting you want.
Just pay a bit attention: there are two "transcode window".
One is relative to DVD and the other one with Blue Ray.
Just a look at the top of them.
If you do not see "do not trancode" in the options, then, Encore had to do it. (quirks?)
Hope this helps
Ciao
Giorgio

Similar Messages

How do you tell which files are open in bridge cs5?

In adobe bridge for CS2, open files in Photoshop show an icon in the lower right corner of the bridge thumnail. This is really helpful in sorting if you have a lot of files open. I can't figure out how to tell in bridge CS5 which files are open in photoshop. Is there a menu option that controls this??

Thanks for the reply. This is a useful feature but not quite what I need.
I am sorting through 2000 wedding photos. I have maybe 10 versions of the same shot open at a time. I edit, save, and close 2-3 of them. In CS2, I would go back to bridge and I could see the 7 files still open. I could quickly highlight and delete them. I'm trying to find a way to do something similar in CS5 bridge. Right now, I take the ones I'm going to delete and stack them all. But when I go back to bridge to delete them, I have to look at file numbers to see which ones are in the stack that I want to delete. This really slows my work flow. Any suggestions? Can I delete them directly from Photoshop?

How can you tell if a file is being used in your project or not?

How can you tell if a file in your bin is being used in your project or not? My director dragged hundreds of reference files into my project and only used a few of them. I'd like to do some house cleaning and delete the ones that are not in use. This project file has 100 sequences in it, so it would be a tough manual hunt to figure this out.
In Premiere Pro (or Flash for example), where all the information is in the Project Bin such as in/out times and duration, there is where it tells you how many times that piece of media has been used or if it hasn't been used yet.
Can FCP tell me this info?
Thanks for yout time!
-Monty

Monty,
Within FCP, there is a menu item called "Media Manager" (depending on what version you are in). This would be worth your while to look into. It basically organizes your project by moving/archiving any used assets of a project and leaving out un-used assets. It saves a ton of disk space.
For example, say you have a 5 minute clip with an in/out point that is just 30 seconds. Media Manager will "archive" just that 30 seconds, not the entire clip. There is even a setting that you can add additional "handles" time to the front andd back of the clip if you think you may need to add or change transition.
Do a google search. I was just watching a few Youtube videos on this myself.
Jonathan

HT4914 How can you tell which songs are downloaded from the cloud on an ipad

How can you tell which songs are downloaded on the iPad from the cloud?

I know ipad albums are more like tagging photos rather than putting them in folders. I just have a nagging feeling I missed some pics and I have too many to try to go figure out one by one. I don't look at my photos from the camera roll, only from albums I tagged just because I imported photos from different sources and the dates and order is really messed up. I just want to know that I am viewing all the photos from like this vacation or that event and there's none I missed that are only in the camera roll.

How do you tell if your iphone has been hacked?

How do you tell if you iphone has been hacked? I have an iphone 3GS and I've gotten text messages from 2 different people that i don't know, telling me they can't see the pics that I've sent them & wanting to know what the pics are of. One of the numbers had been part of a group message that I recieved from a friend. I just thought she ended up responding back to me by mistake thinking she was sending a message to the originater of the group message.Then a couple weeks later i got another text from a person I have never contacted wanting to know who I was & why I was sending multimedia messages that she couldn't open. Just trying to figure out what is going on. If I postd this on the wrong group, please let me know which one I need to post this on. Thanks.

Well that's good to know. As far as I know the phone has not been jailbroken, unless it was done before I bought it. I purchased it used from an individual who said it was restored to factory defaults.
It just concerns me that people are texting me telling me that I'm sending them pics that they can't open. I've checked my bill online & nothing shows up that shouldn't be there.

How can you tell which cabinet you are connected t...

As the title says, how can you tell once installed.
the reason i ask is where i live there is only the bt-pcp and the drl-fttc cabinet and no others.
from what i heard is that both BT and DRL occupy the same fttc cabinet, and this would suggest so based on other information received.
yet from other information i'm hearing is that they don't and we're probably wired all the way back to the exchange which i would have thought was a bit odd seeing with 3 miles from exchange (as the crow flies).
so is it possible that they use the same cabs?

hi,
yeh am on infinity now and so far working fine
had one disconnection but thing that was caused by outage as took router a few attempts to re-connect, but other than that my pppoe has only dropped when made a change on router which required it to restart.
now been connected for 8 days without dropping (usually dropped every weekend when on DR) so continuing to monitor.
the engineer advised was connected via the cabinet in street, but only cabinets are the bt-pcp and the dr-fttc cabinets, and AFAIK BT and DR share the cabinet from what I've been previously told, but then someone else has said they won't do that and the connection is probably one that is underground if there is no bt-pcp.
i'll send Dean a message just so i know for future as i know the bt-pcp cabinet my number is connected too.

How do you tell the sequence of a TV series in iTunes?

Hi,
I've never downloaded a TV series before in iTunes and I am wondering how do you tell the order of the "chapters"? I don't see any sequence information. For example, I am interested in downloading the series called "The Walking Dead" but I don't know how to tell what order to watch them in. Any hints?
Thanks.
Dave

Simply double click on the playlist name.
Really easy
Let me know

Cpu has 4 usb's on the rear. 2 are 2.0 and 2 are 3.0. how can you tell which one is which

Just bought new HP PAV p7 1380t. It has four USB's in the rear. According to specs
2 are 2.0 and 2 are 3.0 How do you tell which one is which?
This question was solved.
View Solution.

Here are the specs and configurable options for your HP Pavilion p7-1380t Desktop Computer. Here are the specs for it's H-Joshua-H61-uATX (Joshua) motherboard. According to the motherboard specs, this system has 4 USB 2.0 ports on the back as shown below;
(#1) USB 2.0 x 4
Typically, USB 3.0 port are blue and have a stylized "SS" symbol near by. There does appear to be a USB 3.0 header on the motherboard, which could be used for front or rear ports.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Movie length - How can you tell???

Hi All,
This is a really dumb question but how can you tell how long your movie is. I've dragged some clips down to the project library window but can't for the life of me work out how to tell how many hours/minutes it is. i can tell how long each clip is but figured getting a calculator out and adding them all up didn't seem the Apple way of doing things. iMovie HD 6 was way easier to use (at least it had a simple timeline you could scroll across and see where you were and at what time. I don't need scrubbing that badly).
Message was edited by: Damographics

problem solved, it didn't exactly jump out at me at first but I found the spot. Sheesh this new imovie is totally different from the previous versions.

How can you tell the difference between ipad 2 and ipad 3 ?

I need to know how can you tell the defferance between the Ipad 2 and Ipad 3 by just looking at it ?

Well it hard to tell if you don't have the two side by side and compair it to...

How do you tell the color value of a pixel in an image data

Hi,
Given a BufferedImage of type, say BufferedImage.TYPE_4BYTE_ABGR, how do you tell the color value of a pixel in the image?
Specifically, in the following code:
Raster imgData = image.getData();
int x = imgData.getMinX();
int y = imgData.getMinY();
int width = imgData.getWidth();
int height = imgData.getHeight();
I want to search the raster looking for a specific color, e.g., Color.WHITE.
According to the API, "getSample()" may be used for this purpose. But, how do you know which color band a band index parameter in getSample() refers to? Does band index of 0 always refer to the RED band? Does band index of 1 refer to the GREEN band? etc.
I'd greatly appreciate any help you may be able to provide.
Thanks,
--HS

In the print dialog underneath the settings for number of copies and print range you should see a dropdown menu probably called Layout. If you don't see that look for a button labeled Details and click it.
Under the Layout menu you should find an option labeled Printer where you will find Printer specific options. Look for something there. You might also find an option called Color which may have options you are looking for.
If this doesn't help, go to the printer manufacturer's website and look for answers there.

How can you tell if a pic hasnt been tagged by iPhoto, and do you then...

How can you tell if a pic hasnt been tagged by iPhoto, and do you then do you then have to draw "missing box" around them
What I mean is tagged a few faces, imported some more pics, checked a few and they dont show as named faces, but are faces that are in my Faces source list (ie identified and named)
So do I then have to draw a box around known faces to me, and name them again (I think iPhoto will pop up as Im typing the names I already have)
It just means that even when i import and it doesnt name, I may have lots of pics that are of faces but not tagged and so not in my faces source list
please help
cheers
ps when are Apple going to upload the Getting Started manuals for iLife 09? its been a while since released now, ad they give a bit more insight than the video tutorials alone

No-one? It'll be nice to know how many pics of faces that arent yet tagged
cheers

How can you tell who the original sender of a group text is on an iPhone 5, when all that appears is a list of recipients in no particular order

how can you tell who the original sender of a group text is on an iPhone 5, when all that appears is a list of recipients in no particular order? I can't seem to identify the sender in the details list.

Start a separate thread to the original sender.

On IOS 7, how can you tell when your battery is charging for your phone?

on IOS 7, how can you tell when your battery is charging for your phone?

thanks everyone=you all helped.
I wasn't used to not getting the 2 sided plug- now I know I am ok>
**hugs**

How can you tell if your podcast is streaming or if you're playing from a download?

Yesterday I downloaded a podcast with the new Podcasts app on my iPhone. To play the podcast (while away from my WiFi), I tapped the episode in the Episodes list. I assumed I was playing the downloaded version. This morning, when I checked my data usage, it was 87MB more than it was yesterday! Does this mean that I inadvertently STREAMED the podcast instead? How can you tell?

This is the itunes forum. Your question seems to have nothing to do with itunes.
Basics from the manual are restart, reset, restore. Try those.

How do you tell assets "Don't Transcode" in Encore CS5?

Similar Messages

Maybe you are looking for