How do you tell how many Safari's you have open?

I am new MacBook user and am haven't figured out how to tell how many Safari windows I have open or how to quickly navigate between them. When using XP I would just click on the IE I want from the taskbar, or if they are grouped select the one I want from within in the group.
For Safari it appears I can either click on Windows -> select from the bottom of the list, or click and hold the Safari icon and wait until a list appears and then select from that list. Both of these options seem slow and laborious for a keyboarder.
- Is there a way to make the individual Safari's show up when I do a Command -> Tab?
- Or is there some functionality I am just unaware of to flip between Safari windows?

Hi
Welcome to Apple Discussions and Mac Computing
I am new MacBook user and am haven't figured out how to tell how many Safari windows I have open or how to quickly navigate between them.
The best way to navigate with Safari is to activate Tabs via the Safari Menu (at the top of the screen, to the right of the Apple Menu)>Preferences. In the Preference panel, click on Tabs and check the 3 boxes.
Using your "hot keys" Command/T keys will create a new tab.
In the browser window, various Tabs that are opened will appear below the Tool Bar (where the web site address is displayed). Clicking on a tab takes you from one site to the next (similar to what you see in Internet Explorer (where the Tabs are along the bottom of the screen).
If you install 3rd party add-on Glims, you'll add a number of very useful features to Safari, including more options with the Tabs. Once installed, you'll find the Glims options as a separate panel in Safari Preferences panel.
Post back

Similar Messages

How many Safari windows can I open at one time?

I have an old habit of keeping lots of Safari windows open at one time, instead of closing them as I go. I'm using a G4 iBook with 768 of RAM over an Airport wireless system. I have at least 40 gigs of open space on my HD and recently repaired permissions and emptied cache and history, but it takes FOREVER for new pages to load. I've enabled the interference filter, which seemed to help for a day or so, but I'm back to beach ball ****. Meanwhile, my spouse is using a TiBook 667 with Airport card on the same Airport base station, and has none of the delays I do.
Does having a couple dozen Safari windows open at one time slow the whole program down? If not, anyone have any other ideas?

iTunes will only open one library at a time.
Regards.

TS3899 I upgraded to IOS 6, I am unable to get into my Yahoo mail. It accepts pw, and pops up and tells me how many e-mails I have and then goes right back to the sign on screen. verified that I can get in from laptop & wireless is functioning.any sugges

I upgraded to IOS 6, I am unable to get into my Yahoo mail. It accepts pw, and pops up and tells me how many e-mails I have and then goes right back to the sign on screen. verified that I can get in from laptop & wireless is functioning.any suggestions?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Does anyone know how many devices one can have on one apple ID?

Does anyone know how many devices one can have on one apple ID?

The names are for your benefit. The devices are identified by serial number in iTunes. iTunes knows which device is which no matter what you name the devices. It works the same way with iCloud. You can name all three devices Fred - and iTunes can tell them apart - but like I said, you want to give them different names for your benefit.

How many fonts can I have without issues on my Macbook Pro?

How many fonts can I have without issues on my old Macbook Pro? I am running 10.6.8.
Thanks,
dugmoore

dugmoore --
Are you having problems? If so, tell us what they are.
If you just want tons of fonts, you should have a good font manager, other than the Font Book that comes with your Mac. And you should avoid "free" fonts. They cause monumental problems.

How many symbolic accounts, I have to create and then assign them to res...

Hi friends,
I am in the BBP creation phase, I have created the list of wage types for my client, there are 41 wage types, now as far as posting to accounts is concerned, how many symbolic accounts, I have to create and then assign them to respective G/L accounts ?
Please throw some practical light on this, I know all theory 
Thanks
Jay

Hi Jay
We wouldnt be able to tell you exactly how many symbolic accounts you may need to create for the 41 Wage Types as it is specific to your requirement.
Check these links out: Symbolic Accounts..
http://sappeers.wordpress.com/category/sap-fi-hr-integration/
It might help you with a fair understanding of what you need to do.
Example for linking wage types to symbolic accounts: basic pay wage type u20181000u2019 is linked to symbolic account u20188888u2019 (Salaries & wages)
Hope this helped!

How many times do I have to download and install Firefox 34.0 Beta 7? Software update asks me to do this (and I do) at least once a day. Yes, I have restarted.

Using MacBook Pro, 15", early 2008, 2.4G Intel core 2 duo, 4G ram. Software update asks to update Firefox 34.0 beta7 every day. If I update, it just asks me to do it again. It has done this through the last several Beta updates. It's a bit disconcerting, since the updates are supposedly for security and stability. Let me put the question in another way: how many times do I have to ignore the update request before it quits asking? This is all causing me to regret making Firefox my default browser, especially since Safari has been improved so much.

Even so there is only a average of nine Beta test builds for each version in six weeks, so not that often.
Sound like you the update is not installing perhaps due to read/write permission issues.
Try downloading the 34.0b7 dmg from https://www.mozilla.org/firefox/beta/all/

How many tasks can I have in NI-DAQmx system?

I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
I am designing a new test platform that will run on C# (because we like object oriented text based programming and because the IDE is free). For hardware we'll use your PXI modules (because your hardware is ultra-reliable). I'm starting with the following PXI modules 6259, 4072, 6509, 2575, and 2569, but we made add other modules later as future requirements demand. I am doing the system software architecture now. I've done some dabbling with Ni_daqmx, and I loathe "tasks" and "channels", but am determined to make them work.
The difficulty I'm having revolves around the overhead with setting up tasks and channels and with the concept of tasks and channels. Help hasn't helped much. Tasks seem to work great if you intend to always collect the same large amount of data from many sources and always will do it in exactly the same way.
We want something much more akin to random access memory. We'll have UUTs of different kinds coming on and off at random times. Sometimes a test will need a simple DC voltage, and other times another test will need 2 seconds worth of data at 1MS/s. It can cost around 150msec to make that change (stop the current task, creat another one, configure anohter channel, start up a new task, blah, blah, task this, channle that - for the life of me I can't understand what this damn taks concept does for me but make matters more complicated and bog down my system).
I can just barely glean from the help that I can have only one analog input task at once, but I can have sevferal taks of several different kinds running at the same time ( a digital output task and another task for digital input, and another task for analong input, etc.) . It does seem that I can set realys without having to put them into a channel and a task (Thank goodness for that - I just wanna turn on a relay I have no idea what a relay "channel" might be.)
In the PXI system I described above I'll have two devices that are analog input devices, the DMM and the Daq. Even with two devices, can I only have one analog input task running? Does that mean I've got to waste 150msec just to switch from the DMM to the Daq? (Do you understand my frustration with "tasks"? - I should be able to say "read DMM" and turn around and say "read Daq channel 0" without having to jump thru task and channle hoops and waste a bunch of time doing it).
I'll also have Daq digital IO and two 6509 digital io modules. Do I have to cram all of that into some "task" concept too? The Daq card has got many other kinds of wonderful capability (frequency measurement, counters, analog output). How many tasks can I have for that stuff? On the DMM card I can measure capacitance amoung other things. Will I have a capacitance task? The idea of a "capacitance task" hurts my head.
Golly I hate tasks. Please help.
I am working out of the office this week - please send your response to [email protected] as well as my normal email [email protected].
Dave

Dave,
Thanks for posting to the NI Forums.
For the good of the community we like to keep conversations that start of the forums on the forums rather than moving to email. If you want to move to email support I recommend contacting NI through the email route.
I will answer your questions here. If you need more direct contact please feel free to contact us through [email protected].
For some the concept of tasks may seem daunting, however, for many applications it makes life a lot more simple. A task at a very fundamental level is simply a collection of channels with a single type (AI, DI, DO, etc.) and a single timing configuration (sampling rate, continuous vs. finite, etc.). It is a way to organize configuration data.
The concept of a task is an abstraction like OO programming. Like OO programming it may take some time to understand but can be a time saver in the end. Also like OO programming it does add some initial programming overhead. It is much more simple to simply type a printf statement in C than to have to create a bunch of classes just to output text to the screen. You can accomplish the same thing not using OO programming, but in the end OO programming is extremely useful, because it groups useful information and methods together in one place.
With very simple applications OO programming sometimes does not make sense. But as a program gets more and more complex OO programming becomes more and more useful. It takes some learning but it is worth it.
I believe the concept of a task does the same thing. It does not change the actual functionality of the device or add excessive overhead. It is just an abstraction that pulls configuration data about a specific "task" and methods the task can perform into a single logical place.
Unlike the entirely abstract concept of an Object, a Task is run on a physical device and therefore has physical limitations. You can create multiple tasks of the same type, but you can only run a one timed task of each type on a single board at a time. In other words you can have multiple AI tasks running at the same time but they need to run on different boards or only one can be timed (have a rate). You can also have multiple timed AI tasks configured for a single board but only one can actually be running at a time.
The reason you can only have a single timed task running at a time is because the M-Series boards (and many other boards as well) have a single timing engine for each type of acquisition or generation. There is a single timing engine for AI, one for AO, and so forth. You cannot have channel 1 running at 1 MS/s and another running at 50 kS/s.
However, tasks can exist even when they are not being actively run. You can create all the tasks you need at the beginning of your program and simply start and stop them as you need. After the task is stopped you do not need to clear the task until the end of your program. You can further increase performance by moving the Task into the latest state possible without actually starting the task. This can be done by calling myTask.Control(TaskAction.Action). The Task states are further explained in the NI-DAQmx Help Manual.
The concept of a task will need to be used with any device that is being programmed using NI-DAQmx. The 6259 and 6509 will need to be programmed using DAQmx. With the 2575 and 2569 you have the choice of either using the NI-DAQmx API or the NI-SWITCH API. The SWITCH API does not use the concept of tasks. For the 4072 you will need to use the NI-DMM API. This API also does not use the concept of tasks.
Hopefully this information is helpful. Let me know if you have any additional questions or concerns.
Regards,
Neil S.
Applications Engineer
National Instruments

How many users do i have with this account?

How many users do i have with this account?

Hi darylm32102489,
Which account are you referring to? I see that you have an Acrobat subscription--is that what you're asking about? Or are you referring to your Acrobat.com online storage account?
If you're referring to an Acrobat subscription, please see this FAQ for information regarding licensing: https://helpx.adobe.com/x-productkb/policy-pricing/acrobat-pro-xi-subscription-faqs.html#i d_83547
Please let us know if you have additional questions.
Best,
Sara

How many devices can I have connected to one iTunes account?

How many devices can I have connected to one iTunes account?

If you mean authorized computers, five.
If you mean devices associated with iTunes Match or automatic downloads, ten.
If you mean devices synced with a single iTunes library, there’s no limit.
(108873)

How many emails can I have on my account? Can I have client folders to customize for each client?

How many emails can I have on my account?
Can I have client folders for each client to access their own survey/forms?
Can I customize for each client?
Do we need multiple subcription accounts for this?

You need to have one FormsCentral subscription per email.
At this time FormsCentral doesn't support folders.
Gen

How many iPads can i have on one iCloud account?

how many iPads can i have on one iCloud account?

Bryan,
According to iTunes Store: Associating a device or computer to your Apple ID:
"Your Apple ID can have up to 10 devices and computers (combined) associated with it. Each computer must also be authorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days."

How many devices can I have in my support profile?

How many devices can I have in my support profile? I have 24 and can not add any more. I just tried to add a new iPhone and it says the serial number, "We're sorry, but this serial number is either invalid or it is for Apple software or accessories. If you are trying to register Apple hardware other than an accessory, please check your information and try again."

Never having seen that question before, I tried to find some information - could not find anything unfortunately. So, unless someone else has a better suggestion, my recommendation is to use this form:
http://www.apple.com/support/feedback/
Send them your question - or, if you are covered by Applecare or regular warranty, simply give them a call and ask.
24 Devices....... hmmmm, I'm green with envy!

How many administrators can I have in my MAC OS server ?

I have installed a mac os server and I wonder how many administrators can I have.

As many as you like. There's no limit. Any user account with admin credentials on the server can administrate the server.

How many ipods do i have to go through with the red x?

i have had 3 ipods in the past 6 months the recent one ive had for 3 weeks after getting it back ive sent in 3 ipods so far and getting tired of putting music and videos on it and having it end up with the red X. how many ipods do i have to go through before it wont break?
Message was edited by: heytheredude878
Message was edited by: heytheredude878

You need to upgrade to Snow Leopard first. Contact Apple to buy a Snow Leopard installation DVD.
Make sure your system meets Snow Leopard's requirements:
Mac OS X v10.6 Snow Leopard system requirements
To install Snow Leopard for the first time, you must have a Mac with:
An Intel processor
An internal or external DVD drive, or DVD or CD Sharing
At least 1 GB of RAM (additional RAM is recommended)
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools
Once you have Snow Leopard, you can upgrade to whatever your MacBook will support.
There is no need for sequential upgrades. The reason Snow Leopard is a prerequisite for further upgrades is that it includes the App Store. All OS versions subsequent to Snow Leopard are distributed that way.

How do you tell how many Safari's you have open?

Similar Messages

Maybe you are looking for