How do you tell if remote desktopis installed on my ipad

i need help in finding if remote desktop has been installed on my computer

Welcome,
It isn't - ARD is Mac OSX only.
Regards,
Shawn

Similar Messages

How can you tell if spyware was installed on an iMac?

How can you tell is spyware was installed on an iMac?

You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful: The User Tip seeks to offer guidance on the main security threats and how to avoid them.
https://discussions.apple.com/docs/DOC-2435

How Do You Change the Remote Desktop Listening Port in Win 8.1 Pro

I am trying to setup two Win 8.1 Pro computers for Remote Desktop access on my local network. I can get Remote Desktop working fine on both when they are using the default RD port 3389. I am unable to change the listening port on one of the computers so
that I can access either via a public Internet connection. I change the listening port in the Registry, reboot the computer and verify that the port number has been changed BUT the computer still responds to the old port 3389 and can't connect via the new
port number. I added a Firewall rule for the new port, but that did NOT solve the problem.
I have followed the procedure below and verified in the Registry that the port is changed but the Remote Desktop remains accessible only on the default port 3389. The new port number in the Registry is 39699. I used a network scanner and it shows the computer
is still listening on port 3389 for Remote Desktop connections. Why is Win 8.1 Pro ignoring the new port number in the Registry and still responding on 3389? Is there another place in Win 8.1 Pro that the port also needs to be changed. I also added a new rule
in the Firewall to allow incoming requests on port 39699? This is a very frustrating problem, any suggestions are greatly appreciated.
I followed the procedure shown below.
Hi ,
Based on my test, we can change the listening port for Remote Desktop.
To change the port that Remote Desktop listens on, follow these steps.
1.Start Registry Editor.
2.Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
3.On the Edit menu, click Modify, and then click Decimal.
4.Type the new port number, and then click OK.
5.Quit Registry Editor.
6.Restart the computer.
Meanwhile, please note, please type the new integer port number between 1025 and 65535 in the PortNumber text box.
And make sure the new port number is not in use by other application.
We may use the command below to check the result.
netstat -a
Also, we can use Network Monitor to trace the port.
Microsoft Network Monitor 3.4
Regards,

Hi,
There are two item that should be modified to change the default 3389 port:
One is: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd\Tds\tcp]. Modify the PortNamber to the one you want.
The other is: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentContro1Set\Control\Tenninal Server\WinStations\RDP\Tcp]. Modify the PortNumber to the one you want.
In your case, you missed the first one.
Regards
Wade Liu
TechNet Community Support

How can you tell if someone is spying on your iPad?

Trying to determine if someone is spying on my iPad where they can see emails, apps, websites visited, get personal info. THanks for the help.

Tracking someone who's snooping on your iDevices is simple. Super simple. Simply clear everything you don't want seen. Web pages, browser history, texts, emails and phone call log. Then double click your home button. Turn off all of your background programs right before you lock or allow your device to auto lock and BOOM! The trap is set. If you suspect a nosy significant other of snooping this will catch them. When you get back to your device and double click your home button it will show you everything that they looked at. It's totally stealth and totally free.

HT4914 How can you tell which songs are downloaded from the cloud on an ipad

How can you tell which songs are downloaded on the iPad from the cloud?

I know ipad albums are more like tagging photos rather than putting them in folders. I just have a nagging feeling I missed some pics and I have too many to try to go figure out one by one. I don't look at my photos from the camera roll, only from albums I tagged just because I imported photos from different sources and the dates and order is really messed up. I just want to know that I am viewing all the photos from like this vacation or that event and there's none I missed that are only in the camera roll.

How can you tell the differance between an iphone charger and an ipad charger?

how can you tell the differance between an iphone and ipad charger

http://store.apple.com/us/product/MC359LL/A/apple-ipad-10w-usb-power-adapter?fno de=3c
http://store.apple.com/us/product/MD810LL/A/apple-5w-usb-power-adapter?fnode=48

How can you tell if someone is accessing your computer or camera remotely?

How can you tell if someone is accessing your computer and/or camera remotely?

what is making you suspicious that this is happening? Or is this just a general question?

How do you tell if your a victim of the recent java hack and what to do

so watching the news, how do you tell if your mac was affected, and is there anything you can do to fix it if you are in fact "hacked" thx

Other than updating Java, there is no perfect way to detect an attack.
You may not have Java installed after all. You can check it.
Finder > Application > Utilities > Java Preferences
Click "Java Preferences".
If a pop-up opens up offering to "Install", Mac does not have Java installed.
Click "Not Now" button and close the Application folder.
Safari > Preferences > Security > Web content:
If the box next to "Enable Java" is checked, uncheck it.
Best.

How can you tell?

I just bought a new Airport Extr N which replaced an older G version, I have a new macbook that is N capable too. Nice hah, well how do you tell if the N is working at the max speed? I did install the new Airport Util for the new AE N - what setting and where can you tell if it is working faster then it did at G ? Maybe seems a bit faster, not sure? What is Multicase rate ? currently set to 2 Mbps in wireless options in AE Util ? I do have older G and B Macs on the network. Thanks for your time!

What is Multicase rate ?
The Multicast rate tells the base station the minimum data rate at which it should maintain the connection. In other words, if the data rate falls below the multicast setting, the AirPort Extreme base station (AEBS) will break the wireless connection.

How can you tell which cabinet you are connected t...

As the title says, how can you tell once installed.
the reason i ask is where i live there is only the bt-pcp and the drl-fttc cabinet and no others.
from what i heard is that both BT and DRL occupy the same fttc cabinet, and this would suggest so based on other information received.
yet from other information i'm hearing is that they don't and we're probably wired all the way back to the exchange which i would have thought was a bit odd seeing with 3 miles from exchange (as the crow flies).
so is it possible that they use the same cabs?

hi,
yeh am on infinity now and so far working fine
had one disconnection but thing that was caused by outage as took router a few attempts to re-connect, but other than that my pppoe has only dropped when made a change on router which required it to restart.
now been connected for 8 days without dropping (usually dropped every weekend when on DR) so continuing to monitor.
the engineer advised was connected via the cabinet in street, but only cabinets are the bt-pcp and the dr-fttc cabinets, and AFAIK BT and DR share the cabinet from what I've been previously told, but then someone else has said they won't do that and the connection is probably one that is underground if there is no bt-pcp.
i'll send Dean a message just so i know for future as i know the bt-pcp cabinet my number is connected too.

Cpu has 4 usb's on the rear. 2 are 2.0 and 2 are 3.0. how can you tell which one is which

Just bought new HP PAV p7 1380t. It has four USB's in the rear. According to specs
2 are 2.0 and 2 are 3.0 How do you tell which one is which?
This question was solved.
View Solution.

Here are the specs and configurable options for your HP Pavilion p7-1380t Desktop Computer. Here are the specs for it's H-Joshua-H61-uATX (Joshua) motherboard. According to the motherboard specs, this system has 4 USB 2.0 ports on the back as shown below;
(#1) USB 2.0 x 4
Typically, USB 3.0 port are blue and have a stylized "SS" symbol near by. There does appear to be a USB 3.0 header on the motherboard, which could be used for front or rear ports.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How can you tell if a pic hasnt been tagged by iPhoto, and do you then...

How can you tell if a pic hasnt been tagged by iPhoto, and do you then do you then have to draw "missing box" around them
What I mean is tagged a few faces, imported some more pics, checked a few and they dont show as named faces, but are faces that are in my Faces source list (ie identified and named)
So do I then have to draw a box around known faces to me, and name them again (I think iPhoto will pop up as Im typing the names I already have)
It just means that even when i import and it doesnt name, I may have lots of pics that are of faces but not tagged and so not in my faces source list
please help
cheers
ps when are Apple going to upload the Getting Started manuals for iLife 09? its been a while since released now, ad they give a bit more insight than the video tutorials alone

No-one? It'll be nice to know how many pics of faces that arent yet tagged
cheers

How can you tell if a file is being used in your project or not?

How can you tell if a file in your bin is being used in your project or not? My director dragged hundreds of reference files into my project and only used a few of them. I'd like to do some house cleaning and delete the ones that are not in use. This project file has 100 sequences in it, so it would be a tough manual hunt to figure this out.
In Premiere Pro (or Flash for example), where all the information is in the Project Bin such as in/out times and duration, there is where it tells you how many times that piece of media has been used or if it hasn't been used yet.
Can FCP tell me this info?
Thanks for yout time!
-Monty

Monty,
Within FCP, there is a menu item called "Media Manager" (depending on what version you are in). This would be worth your while to look into. It basically organizes your project by moving/archiving any used assets of a project and leaving out un-used assets. It saves a ton of disk space.
For example, say you have a 5 minute clip with an in/out point that is just 30 seconds. Media Manager will "archive" just that 30 seconds, not the entire clip. There is even a setting that you can add additional "handles" time to the front andd back of the clip if you think you may need to add or change transition.
Do a google search. I was just watching a few Youtube videos on this myself.
Jonathan

How can you tell who the original sender of a group text is on an iPhone 5, when all that appears is a list of recipients in no particular order

how can you tell who the original sender of a group text is on an iPhone 5, when all that appears is a list of recipients in no particular order? I can't seem to identify the sender in the details list.

Start a separate thread to the original sender.

On IOS 7, how can you tell when your battery is charging for your phone?

on IOS 7, how can you tell when your battery is charging for your phone?

thanks everyone=you all helped.
I wasn't used to not getting the 2 sided plug- now I know I am ok>
**hugs**

How do you tell if remote desktopis installed on my ipad

Similar Messages

Maybe you are looking for