How do you test the camera on the mac intel

why won't the camera work on skype or oovoo? I've tried to test it, but NOTHING works! HELP!

Go to > How to Troubleshoot iSight

Similar Messages

How do you make multi cameras look the same?

So I have three cameras used in the shoot. Lighting is from regular track lighting most commonly found in ware shouse type venues. Cameras 1 & 2 are one foot off the ground pointing ever so slightly up. Camera 3 is shooting from 15 feet off the ground pointing down. How do I make them all look the same in post production? When I try to increase the brightness in camera 3 it looks washed out. When I try to dim the brightness in 1 & two it looks dark and shadowy.

Ideally you start with this:
• 3 identical camcorders.
• Manually set the white balance in each camcorder onsite before doing a shoot.
• Make sure the 'program' setting is the same in each camcorder, e.g. they should all be "Auto" or "Spotlight" or "Portrait" etc. - the one you prefer.
• If possible, manually set the exposure in each camera
What probably happened is your camcorders' auto exposure did its job and the cams pointing upward were underexposed because the sensor was affected by the overhead lights.
If your clips' brightness & contrast are reasonably close, start by applying the Color Corrector filter to each clip. Use the Visual control (you will see the button when you apply the filter) and then use the Eye Dropper tool to set the white & black points in each clip. If the cameras weren't too mismatched this may be enough to correct the brightness mismatch. I doubt you will get a perfect match but hopefully close enough that it's acceptable.

How do you Remove a photo from the camera roll album without deleting from other albums

How do you Remove a photo from the camera roll album without deleting from other albums

If it was originally on the camera roll try this: take another unimportant photo for test purposes, copy it to any special folder you have created within Photos, connect your iPad to your computer, locate it as any other external device, and most likely that Photos folder will be the only thing that will show up, locate the photo, delete it and then sync your iPad.
If the test photo is gone from the camera roll but still in another folder within the app then you know that the system works so go ahead with the process. I understand that there are other photo apps which might let you achieve your goal much quicker.
Hope thi helps.

How do you test any SAP objects before a transport to the production server

How do you test any SAP objects before a transport to the production server?

Hi Rama Krishna,
The actual process is develop the object in development system and unit test there with the available data.
Then move it to Quality server where the data will be the actual replica of production and where the integration testing and ened to end testing happens and also the user acceptance testing happens there.
and once everything is found fine there then it is moved to production system.
Award points if this is helpful.
Regards,
Ravi G

How do you turn on pano in the camera

How do you turn on Pano in the camera? At the bottom of the screen I can see a partial pano word, but nothing happens when I tap it.
On the bottom I have slo-mo on one side and pano on the other, but they are partially faded out.

You are very welcome. I agree, there are some very un-Apple like changes to the user interface in iOS 7.
The iOS 7 manual may help.
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

HT4515 how do you erase a photo from the Camera Roalbumll and still keep it in a selected

How can you erase a phote from the camera roll and not delete from the selected album you moved it to

You don't. There is only one picture. if you delete it from Camera Roll then it will be gone. Just as a song is in your library and that exact same song is in a playlist, a pic is in the camera roll and that exact same photo can be accessed from a album that you make.
The pic is not moved to the album, the album is simply a playlist. the pic lives in the camera roll.

How do you "eject" a camera or such device from the photos app after import?

How do you "eject" a camera or such device from the photos app after import?

Thanks for your answer. It certainly seemed that since there was no longer a control-click option in Photos for a mounted device that a hot dismount or eject would be OK. Should there be any caveats to the user who selected a Finder option not to show Hard disks, External discs or CDs DVDs and iPods--or is this still uniformly true across all devices (old iPads, Firewire, etc.)?
This is only true for devices that are not accessible in the Finder. For iPhones, iPads, newer iPods. If a device shows up in Disk Utility as a mounted disk, you have to eject it properly.
But the newer iOS devices are not mounted as a disk, that a user can write to or eject.
For example, I just connected my iPhone 5s. It shows in Photos and iTunes in the sidebar, but Disk Utility does not show it as a mounted device, so there is no way to eject it.

How do you get the camera on the iPhone4 to zoom?

How do you get the camera on the iPhone4 to zoom?

Check to see that it isn't set to video recording (which doesn't zoom). Otherwise you may need to restore your phone to fix this if it's a software problem (http://support.apple.com/kb/HT1414). Restoring replaces the iOS with a fresh copy of the latest iOS.

How do you transfer photo albums to the computer? When I hook to USB, it only shows photos from the camera icon, not the photos icon. I am trying to save pictures for the in-laws from their ipad.

How do you transfer photo albums to the computer? When I hook to USB, it only shows photos from the camera icon, not the photos icon. I am trying to save pictures for the in-laws from their ipad.

I have no clue that you mean by it only shows photos from the camera icon. It has to show the photos in the camera roll of the photos app since those are the only photos that you can import via the USB cable.
There are other ways of transferring photos to a computer, but they involve using third party apps. There are WiFi transfer apps that will do this. DropBox will also let you upload photos to a public folder and then download them to a computer.
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
http://www.wirelesstransferapp.com/
https://www.dropbox.com/ipad

Powershot G15 - How do you fire studio lights from the hotshoe?

Hello,
I have a Powershot g15 and I can't figue out how to fire my studio lights fro the hotshoe. I had it working a few months ago but a con no longer find the correct series of setting to fire always. Do you know kniw the right combination of settings??
Thanks,
Brian

Have you tested the flash, sync-cord, and adapter?
The foot of a flash is actually it's ground pin and it makes contact with the hot-shoe rails on the camera. If you ground the center pin to the ground, the flash will fire. So if you were to disconnect the hot shoe adapter from the camera and use a piece of metal to touch the center pin and ground pin (on the hot-shoe adapter... not on the camera) then the flash should fire. If it does not fire then there's a problem somewhere in that path... either the adapter, sync-cord, or flash are having a connectivity problem.
Tim Campbell
5D II, 5D III, 60Da

How do you remove a playlist from the iPod but not the library

How do you remove a playlist from the IPod but not the library?

If it was originally on the camera roll try this: take another unimportant photo for test purposes, copy it to any special folder you have created within Photos, connect your iPad to your computer, locate it as any other external device, and most likely that Photos folder will be the only thing that will show up, locate the photo, delete it and then sync your iPad.
If the test photo is gone from the camera roll but still in another folder within the app then you know that the system works so go ahead with the process. I understand that there are other photo apps which might let you achieve your goal much quicker.
Hope thi helps.

I have an Olympus E620 and have bought an IPad 4th Generation. How can I transfer my pictures from the camera to the IPad?. My camera does not take SD cards.

I have an Olymput E620 and iPad 4th generation, how can I download the pictures off the camera to the iPad?
The only cable I can find with lightning and usb is the apple camera adaptor but it is £25 from Apple which is a bit expensive if it will not work. Some peoples reviews seem to say this will not work, I can not use the camera reader by Apple as this only takes SD cards and my camera takes XD and compact flash cards. I have realised that you cannot use this cable on a card reader which is a shame and means taking more cables on holiday with you and more likely to get lost. This is so frustrating as one of the reasons of buying the iPad was to use, to transport photos whilst away instead of having lots of cards which do get lost and damaged. I hope someone can help as there seems to be a lot of confusion as to what works in cases like this.

go to start - computer - right click on ipod and import pics.
Peace, Clyde

How do I download my Camera to the ipad and then to iphoto on my G5?

Lets say that I'm on vacation and the memory card on my camera is full.
How do I download my camera to the ipad2?
And then when I get home how do I transfer those same photos to iphoto on my G5 running Leopard?
Thanks!

Thanks,
And I just read this on the camera adaptor link in the apple store, which answers part 2 of my question.:
With the iPad Camera Connection Kit, it's incredibly easy to download photos and videos from your digital camera to your iPad so you can view them on the gorgeous iPad display and share them with family and friends.
The kit includes two connectors, each with a different interface:
The Camera Connector features a USB interface. Just plug it into the dock connector port on your iPad, then attach your digital camera or iPhone using a USB cable (not included). iPhone 3G is not supported.
Use the SD Card Reader to import photos and videos directly from your camera's SD card. Connect it to your iPad, then insert your digital camera's SD card into the slot.
After you make the connection, your iPad automatically opens the Photos app, which lets you choose which photos and videos to import, then organizes them into albums. When you sync iPad to your PC or Mac, the photos and videos on your iPad are added to your computer's photo library.
iPad and the Camera Connection Kit support standard photo formats, including JPEG and RAW, along with SD and HD video formats, including H.264 and MPEG-4.

I am downloading from a Canon 650D to Photoshop CS5.1 AND Adobe Bridge CS5.1 do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

I am downloading from a Canon 650d TO Photoshop CS5.1 and Adobe Bridge CS5.1 Do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

Please check the list yourself and co,mare the necessary CR version with the one your version of Photoshop utilizes.
If the version os higher than yours you can use the free DNG Converter – as to how to use it please read up on that.
Camera Raw plug-in | Supported cameras

I just downloaded iOS 6 to my iPhone 4 and all-of-sudden, the camera on the back of my phone isn't working. Anyone know how to fix this?

I just downloaded iOS 6 to my iPhone 4 and all-of-sudden, the camera on the back of my phone isn't working. Anyone know how to fix this?

The SMS links thing is highly annoying. You don't have to copy/paste however. You should see an icon like this: (>) to the right of the text bubble with the link. Tap on that, the in the screen that opens, tap "Visit".
Alternatively, you can tap twice directly on the link, then hold your finger down after the second tap.
Still unnecessarily difficult, but not as bad as copy/paste.
What I don't get is why can't I find any mention of this change or how to fix it (if even possible) elsewhere online?

How do I delete my user ID photo, taken with the camera in the MacBook Pro. It keeps appearing randomly when I sign in....even after I make changes.

How do I delete my user ID photo, taken with the camera in the MacBook Pro (when you first buy and set up the computer...). The photo keeps appearing randomly, even after I've changed it to a "better picture". I can't get the change to "stick". Anyone else having trouble with this? Thanks!

what OS are you using?

How do you test the camera on the mac intel

Similar Messages

Maybe you are looking for