How do you track hits on hit counter in iWeb?

I have been creating a personal poetry website on iWeb and I am fairly new to Mac in general. I found the Hit Counter button and added it to every page on my website. My question is how do I see how many hits i have? The hit counter does not show up on my published site.
http://jennifercramer.site90.com/Jens_Site./Home.html

The hit counter only appears when you publish to MobileMe.
Search the iWeb Help for ftp to learn what else is not supported.
There are lots of alternative counters you can use.
Search this forum : hit counter

Similar Messages

How Can You Track Your Ipod If Lost Using The Serial Number

How Can You Track Your Ipod If Lost Using The Serial Number?

The find my iphone app has nothong to do with it.
That app simply allow you to find other devices using your ipod. It has nothing to do with fining the device on which it is installed.
If you set up the find my ipod feature that is built into your ipod and the ipod is on and it is connected to wi-fi and it has not been restored, then you may be able to get an approximate street address using icloud.
Othrewise, it cannot be tracked.

How do you track a lost iPhone?

My iphones were stolen through the U.S. mail, how can you track it to find out its where it is located?

You don't.

How do you track a stolen ipod

How do you track a stolen ipod ?

There are many messages addressing the same subject here --->>
Here's a good one:
https://discussions.apple.com/message/16975364#16975364

How do you track your ipod

how do you track your ipod

What To Do If Your iDevice Is Lost Or Stolen
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
How To Set Up Free Find Your iPhone (Even on Unsupported Devices

How do you track a stolen MacBook Pro with iCloud?

How do you track stolen MacBook Pro with iCloud

If you had set up Find My Mac on your MacBook before it was stolen, go to http://www.icloud.com and log in, then press Find My <Something> there.
If you did not set up Find My Mac, it's too late now. You cannot track it.

How Can You Track a Person That Has Your IPhone And You Want It Back

How Can You Track a Person That Stole Your IPhone And You Want It Back

Log into icloud.com with your Apple ID and use Find my iPhone to track it. If it can't be located that way, there is no way to track it.

HT4623 how do you track a stolen iphone 4s

how do you track a stolen iphone 4s

IF you set up find my iphone on the iphone itself AND it is on ADN it has not been restored, tehn go to icloud.
Otherwise, you cannot track it.

How do you track a stolen device?

How do you track a lost device?

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

HT1349 how can you track you ipod with only serial number ]

2nd Generation ipod Touch

Hello, Tommyty,
I am sorry you have lost your iPod. You don't yet seem to understand that its serial number is not tracked electronically. Here is my attempt at explaining the same thing that Limnos and stevejobsfan0123 have already told you.
Tommytj wrote: ... HT1349 how can you track you ipod with only serial number ] ...
Only by physically looking at the iPod's serial number.
Tommytj wrote: i need to find my ipod can anyone help me find a way to track my ipd touch with only a serial number using icloud.
No.
Nobody can help you with that request because iCloud and "Find My iPod touch" do not work that way.
If you cannot see the iPod, you cannot track its serial number. Unless someone sees the serial number, nobody can track it.
Regardless of whether you have properly installed and enabled "Find My iPod touch", iCloud does not track your iPod's serial number. This is true even when you or someone else can see your iPod's serial number.
Regardless of how much you wish iCloud could track your iPod's serial number, it cannot.
"Find My iPod touch" can sometimes track an iPod's location but only under the specific circumstances Limnos has already explained to you.
If "Find My iPod touch" cannot locate your iPod by its location, there is no iCloud way to find it. In that case, the only way to identify your missing iPod is for you or someone else to physically look at it.
Perhaps you will be successful with one of these alternative possibilities for recovering your iPod:
• you can physically search and find your misplaced iPod
• someone may it returned in response to a reward that you offer
• the police may find it after you have reported it stolen
Message was edited by: EZ Jim
Mac OSX 10.7.4

How do you track a phone that's been deactivated

How do you track a phone that's been deactivated after I lost it?

Open eyes and look for it as would be done for any other missing item.

How do you track 4 coner pins of a composition 4 corner pins

How do you track 4 coner pins of a composition 4 corner pins
Hi guys.
Can you watch my screencast and help me with it?
http://youtu.be/WbLk8u19TNo
I tried to search everywhere but I couldn’t find answers, maybe wrong keywords.
Is there a way to track the 4 cornorpins of the composition?
I am doing some project related to 4 cornorpin.
http://blog.dotify.fr/nteractive-video-with-4-corner-pin-motion-tracking-after-effect-flas h/
like this..
I know I could do a black solid layer in to “footage holder 6 pre-comp” and track with 4 corner pin.
But I wanted to know if there is a way to track the pins w/o rendering.
As it should be the most precise way to find conor pins
Can you help?
Thanks.

Thanks for reply.
Just like the project in
http://blog.dotify.fr/nteractive-video-with-4-corner-pin-motion-tracking-after-effect-flas h/ .
or
http://www.soundstep.com/blog/experiments/jstracking/
I want to make a script that can show replacing placeholders in the footage.
To do so, I need coordinates of 4 corner pin of a composition(the composition which I can replace the footage).
Of course, I can put a placeholder with dots, render the project and then motion track it.
But it takes long time and tracked data is rusty and inaccurate.
I thought it mightbe cool if I could just keep tracking the vertax's x coordinate and y cordinate data.
It will be precise, clean and quick since the positions of the dots are already calculated.
Can you help?

How do you track a device offline?

So I went out to eat with my family, and I lost my Ipod touch. I tried using find my Iphone, but it says device offline. What I'm really trying to say is how do you track a device offline

you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

How dso you track your ipod

how can i track down my ipod that has went missing?

If you have an iCloud account, and registered your iPod in Find My...login to your iCloud account, then open Find My and highlight the iPod and it should search for it...but if the iPod is turned off, not connected to the internet, or been restored to factory settings it will not show up. In that case there is nothing you can do to locate it.

How are you tracking deployed software versions for traceability?

I am curious how others are tracking deployed software versions in automated test environments.
I am working on a medical device tester and we have a somewhat inefficient method for keeping track of all version numbers. I would like to know what tools are available to automate tracking version throughout a project, from build to viewing later. Or, what methods are typical in this type of environment.
Essentially, we need to be able to say at any given moment what software version is running at 3 remote locations on several deployed systems.
For simply automating the process of viewing the version number programmatically, I found this, but we've had issues with it:
http://digital.ni.com/public.nsf/allkb/D45E3A1E694815AD86257173005CFD36
This solution requires a "separate" installer to get the .NET framework onto the target PC. Also, it doesn't work (to my knowledge) with the Help>>About window.
Comments?
Dan Richards
Certified LabVIEW Developer

Dennis,
Thanks for replying. We are using SVN. The exact ECO process for this project is under construction as it is a relatively new project and deployments will be at our customer's site. We use JIRA for tracking specific change requests.
Here's an example of our basic process:
- Software changes made (according to JIRA tasks) and source code checked in
- Builds released per schedule with version numbers (from JIRA projects) hard-coded into the application
- Builds deployed at different locations & times
Here's what I'd like to see to improve things:
- Builds released with version numbers generated from one of the following:
   1. Loaded from JIRA release numbers - maybe auto-generated for reference by LabVIEW when building the application
   2. Part of a custom build launcher
         >> This would be a custom interface that runs functions like those in Application Builder palette while also sending version info
         >> Perhaps it could prompt the user for version info or read from something auto-generated.
- Builds should automatically make version numbers visible within the application (for example, LabVIEW has the Help>>About window)
- Build numbers should be programmatically/dynamically accessible without having to install an additional .NET framework that isn't listed in 'Additional Installers'
Curious if there are any tools that support these kinds of things. I am aware of Deploy by Wirebird Labs and Proligent by Averna, although I am lacking in knowledge about specific features.
Regards,
Dan
Dan Richards
Certified LabVIEW Developer

How do you track hits on hit counter in iWeb?

Similar Messages

Maybe you are looking for