How do you tun off continuous play for video

IIt seems the itouch will play videos continuously.  I want it to play one episode of a show then stop.  I can't seem to find any settings for this.  i go to sleep with a tv episode playing and don't want to wake up with a dead battery.  This has never happened on any other devise and it's insane.  Lol. I need help to disable the continuous play.  Thanks.

You asked the same question seven hours ago.
How to Stop continuous video play
It is impolite and counterproductive to post same question more than once. If yo are not getting a response to your question then just reply to your original question to bump the discussion back to the top.

Similar Messages

  • How do you turn off compatability view for old version of windows?

    How do you turn off compatability view for old version of Windows?

    Refer to this article:
    iTunes for Windows: How to turn off Compatibility Mode
    http://support.apple.com/kb/TS1489

  • How can you turn off the sounds for receiving a text or e-mail while on a phone call???

    How can you turn off the sounds for receiving a text or e-mail while on a phone call???

    That's the most stupid thing. It may work but the phone shouldn't be going off in your ear while in use from the start.
    Message was edited by: Ford Truck

  • How do I turn off Auto Play for Audible Downloads?

    Ok so this is ticking me off....How do I turn off the Auto Play when downloading Auduible books.  It downloads to my download folder and then just startes playing in iTunes.  This annoys the heck out of me and I really want it to stop doing it.  Es[ecially today since I had to rebuild my iTunes library and I would reather listen to music than a new audio book intro every couple of minutes.....

    I have found that using the Sleep Timer option that is in the bottom right corner of the app will stop playing the episodes continuously and not move on to the next one once the current episode ends.
    See the links here for Sleep Timer access & options.
    https://www.dropbox.com/s/sqvij1wt8fkf6am/2014-03-21%2021.08.55.png
    https://www.dropbox.com/s/3prstm21bd2we9e/2014-03-21%2021.08.51.png
    Hope this helps!

  • How do you turn off home sharing for ical?

    My daughter is using her iCal on her iPod and it is syncing to my iCal. How do you turn this off?

    Have you read this:
    http://support.apple.com/kb/ht4352
    I don't have an Apple TV so all I can do is send you the link.

  • HT1491 How do i turn off auto download for videos i buy from iTunes on my iPad?

    I do not want to auto download tv shows (especially entire HD season passes) purchased from iTunes on my iPad.
    I see the setting for music, apps or books, but not for videos
    Anyone know how?

    No, I said bought on iTunes with my iPad. A computer was not used.  I bought season 1 of the Waliking Dead and my iPad auto queued all 6 episodes in HD for download. I do not want to download 36 gigs of video... I just want to watch them on my Apple TV.
    In retrospect, I should have just bought them on my Apple TV or desktop and not my iPad.
    But now the videos are in my dl queue and I can't cancel the dl, only pause.

  • Can you switch off continuous play?

    I have an iphone 5. When playing songs is it possible to stop it automatically playing the next track?? I don't want to have to put each track into a different playlist. I'd just like to play one and then when it's finished I can then press play on the next track. Any advice would be much appreciated. 

    The only suggestion I have is to tag your songs as "Skip when shuffling" and turn Shuffle mode on.  That will make playback stop after the selected song completes.  The downside is that this is an all-or-nothing thing, so to disable this you'd have to not use Shuffle, or re-tag your music again to turn this setting back off.  If it is just a specific set of songs maybe that's not a problem.  The "Skip when shuffling" setting is done in iTunes, go to Get Info and look on the option tab for the song(s) you want to change.

  • How do you turn off SPI Firewall for WRT54G?

    While browsing ebay, I've noticed loading speeds are drastically different with and without the router.  Its faster without the router(normal, est. 5 sec. or less to load an ebay auction page) and slower with the router(est. 25+ seconds to load an ebay auction page).
    Linksys support page does not help. It bluntly states how some software firewalls do not work with the router and to disable and remove the software firewall if any trouble arises.
    I've seen the data sheets for the WRT54G.  Under the data sheet's Firewall tab, there is an option to turn off SPI but mine doesnt have that option.  Im guessing that its a firmware update but I would rather not update if i dont have to.
    If anyone has any ideas on how to do this, it would be a great help.

    What version of the WRT54G are you using ? I'd suggest upgrading the firmware or try reducing the MTU on your router.

  • How can you hook up multiple camcorders for video shoot?

    I'm making plans for my wedding and I was interested in recording it with stationary camcorders and my Macbook Pro's webcam of the event. I've hooked up my camcorder before as a additional webcam, but I have't recorded from multiple camera's before. This is importabt because I was also thinking of streaming the video from all 3 cameras online so friends and family could watch the event from out-of-town.
    I was thinking I could use my Final Cut Pro software to bring the Camcorder footage in using firewire, but I'm not sure about the computers webcam.
      I would really like any opinions and suggestions that don't require additonal purchases.
    Any past experiences would be appreciated.

    Hello JamieLG. Welcome to the Apple Discussions!
    First, let's double-check your AirPort Express Base Station's (AX) settings...
    AirPort Express Base Station Setup (AX) w/High-Speed Cable Modem
    Setup the AX
    Connect to the AX's wireless network, and then, using the AirPort Admin Utility, check these settings:
    AirPort tab
    o Base Station Name: <whatever you wish or use the default>
    o AirPort Network Name: <whatever you wish or use the default>
    o Create a closed network (unchecked)
    o Wireless Security: <your current wireless security setting: None, WEP, or WPA>
    o Channel: Automatic
    o Mode: 802.11b/g Compatible
    Internet tab
    o Connect Using: Ethernet
    o Configure: Using DHCP
    o WAN Ethernet Port: Automatic
    Network tab
    o Distribute IP addresses (checked)
    o Share a single IP address (using DHCP & NAT) (enabled)
    If you have wireless security enabled, which type is it: WEP, WPA, or WPA2?

  • How do you turn off the special characters for letters?

    How do you turn off the special characters for letters? Where you hold down the key and it comes up with variations of the letter. For example ï í î ò œ å ß ł û
    It is very annoying when I try to play any online games. Thanks for the help

    Thank you so much It worked Thank you

  • How can you change your security question for I tunes?

    How can you change your security question for I tunes?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

  • HT2978 how do you turn off genius for apps ios 6 pleasssss help my appstore keeps on crashing

    how do you turn off genius for apps ios 6 pleasssss help my appstore keeps on crashing

    What you are saying is true but it will not always work. The aap store is dead. Wen I go to the fret urged page I see a white screen. I should be able to scroll down to the bottom and select View Apple ID but can't. This is on my wife's iPad and she thought after she upgraded to iOS 6.0 when it prompted her to turn on Genius that's what caused the trouble and she wanted to turn off Genius. NO CAN DO in App Store.
    To turn off Genius I had to go to Settings > iTunes &amp; App Stores > Apple ID xxxxx then click view Apple ID then I can turn Genius off and on.
    But the did not fix the problem with the App Store which is still dead.

  • How do you turn off the update pop ups for ...

    How do you turn off the update pop ups for pages, keynote, & numbers? I do not wish to upgrade from iWork9. And I especially do not like having to had to type this three times.

    This might work: http://hints.macworld.com/article.php?story=20140712032947258

  • This is so basic: How do you turn off Apple TV, or do you just exit by changing the Input back to regular TV? When I put Apple TV to sleep, I had to log in again, a very tedious process with that awful "announcer" for the hearing impaired (how to remove?)

    This is so basic: How do you turn off Apple TV, or do you just exit by changing the Input back to regular TV? When I put Apple TV to sleep after I installed it, I had to log in again, a very tedious process with that awful "announcer" for the hearing impaired (and how to remove that?).

    Welcome to the Apple Community.
    The Apple TV will put itself to sleep. I'm not sure what you needed to log into again, but you shouldn't have to. Do you have a little more detail about what happens.

  • How do you turn off Camera?

    In an AIR application, how do you turn off the camera once it has been activated? I remove all references to Video objects associated with the camera, unattach the camera from NetStreams, and remove references to the camera object. This does not deactivate the camera; it seems to be necessary to run the garbage collector too. The trouble is that running the program in the debugger with the manual garbage collector action causes the application to be unresponsive for >30 seconds, which is extremely annoying. Is there a simpler way to turn off the camera?
    For reference, I am testing on a MacBook that has an LED for when the camera is in use.
    EDIT:
    I have opened a bug for this, which Adobe appears to say is an enhancement.
    https://bugbase.adobe.com/index.cfm?event=bug&id=3552765

    This is the most annoying thing on an otherwise awesome phone...can't take pics at my nieces school plays and stuff now. Blackberry Needs to fix this NOW! It is not illegal in the US to turn off your shutter sound....WTF Blackberry?!?

Maybe you are looking for

  • HDR Toning Error 48: File or Folder Does Not Exist

    After migrating to a new computer HDR Toning is no longer available. I get a pop-up: Error 48: File or Folder Does Not Exist                          Line 11  -> $. evalFile(g_StackScriptFolderPath + "StackSupport.jsx"); What's the fix for this, if a

  • How to Group and Sum rtf elements

    Dear Friends, I am having limited knowledge of XML so looking for your help I am trying to create external template for Bill Presentment Architecture which is in .rtf. Template is having 3 section Invoice header, Lines and Tax summary. Invoice Header

  • Upgrade to Forms 6i Issue

    Hi, I have recently upgraded a Designer generated 5.0 Form to Forms 6i. I only upgraded the FMB and all the associated PLLs through the Forms 6i Designer, rather then regenerating through Designer 6i. There is a reason I need to do this, dont ask ;)

  • HT1338 I have version Mac OS X 10.5.8. I no longer get software updates. What could be the problem?

    I have version Mac OS X 10.5.8. I no longer get software updates. What could be the problem?

  • Login with Apple ID has 50+ apps from another Apple ID

    My wife and I have separate Apple IDs, separate iPhones but only one computer that we share where iTunes is installed. This hasn't been a problem and iTunes did a great job at detecting which iPhone was connected. Starting about a week ago, there are