How do you turn guides in layers off?

Hi, I am haveing the same problem from a long time ago which I posted that problem here: http://forums.adobe.com/thread/1276634?start=0&tstart=0
But now I created a new Puppet and am haveing the same problem again, I was wondering on how you turned off the guides in the layers as was the correct answer  said by Asymetrical on that thread above because when I try to do that with my puppet it didnt work. Asymetrical is probably doing it a different way than I am. If you could please send me detaled instructions on how he did this that would be fantastic.
I greatly apreashiate all the help, Thanks in advance!

I haven't seen the original fla in the post you mentioned here, but looking at the description it seems the problem was that some of the layers, which were supposed to be normal layers, were marked as guide layers.
If you have a similar issue then you can right click on any such guide layer, and uncheck "Guide" from the context menu to turn the guide layer off. Not sure if this is the problem with your content also though, as you might have tried it already I guess. You can probably share some more details about the problem content.
-Dharmendra.

Similar Messages

  • HT4993 How do you turn the weird sound off when sending a text using the iPhone 4S

    How do you turn the weird sound off when sending a text using the iPhone 4S?

    Go to Settings-Sounds-Text Tone and change to None.  You're referring to the sound when posting a message to someone else, correct?  The only issue is if you set to none, you will not hear the incoming either.

  • How do you turn the Palm Centro OFF?

    Ok, the manual states how to turn off the PHONE, but not the entire DEVICE.
    Does anyone know how to completely turn the unit OFF?
    Thanks
    Rick
    Post relates to: Centro (Sprint)

    This is somewhat related to the turning off question.  (Thanks for the answer to that one, by the way. ) 
    For some reason, the screen on my Centro won't stay off.  I'll hit the power button, and the screen will go blank, but I'll look at the phone a few minutes later, and the screen will turn on again.  I'd like to keep the screen and touchscreen off until I need it to save the battery.
    I'm using PowerMan to conserve power, if that has any bearing on this.  Thanks!
    Post relates to: Centro (AT&T)

  • How do you turn the iPod Classic off?

    My mum can't turn her iPod classic off properly, can u help?

    A long press on the Play button makes it shut down.
    If it doesn't respond check the Hold switch.
    If it still doesn't respond press Menu+Select for about 6 seconds to reset the device.
    tt2

  • How do you turn the camera light off

    Cannot get the camera light to turn off

        That's strange behavior for your iPhone, ddavis1727. Do you have a flashlight application installed on your phone? Have you tried turning your phone off and back on? What software version (Settings > General > About > Version) do you have on your phone?
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • HT4203 How do you turn everything BUT texting off on an iPhone?

    I'm traveling out of the country and only have a texting plan...

    You don't. You can contact your carrier and have them set up to forward your number to some other number that won't be answered, but that's about it.

  • How do you turn off the auto select behavior when working with shape layers?

    How do you turn off the auto select behavior when working with shape layers?
    I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
    If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to  turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

    As far as i know the move tool options don't have any effect on the path selection tools.
    You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
    you can shift click with the Direct Selection Tool or Alt click to select the entire path.
    more path shortcuts:
    http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

  • How will you turn off an IPhone 4S voice over with the latest IOS

    How will you turn off Voice Over in Iphone 4S? i tried turning it off through settings/accessability/voice over but when i turned it off it always go back to ON. It is very depressing to go over with this feature. Thanks.

    on your phone go to settings - icloud - find my iphone - off

  • HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did the "see Advanced - General - Accessiblity. and still having problems

    HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did perform the "see Advanced - General - Accessibility. It worked for me and my "user" site (don't know how to say my site) and still having problems with my wife's. I have gone to OPTIONS → GONE TO → ADVANCE and CLICKED THE LINE → ""Warn me when websites try to redirect or reload the page…""
    This did not rememdy the problem. I did try to get on the other site suggested
    http://kb.mozillazine.org/Accessibility.blockautorefresh
    but got a 404 error...
    I have googled the "ff prevented...." and after a number of hours searching I still have not found a fix...
    REALLY HOPE SOMEONE CAN HELP ME....
    JM

    You should still disable this setting:
    *Firefox > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    The setting in "Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
    What is the value of the <b>accessibility.blockautorefresh</b> pref on the <b>about:config</b> page?
    *http://kb.mozillazine.org/accessibility.blockautorefresh
    If you have problems with preferences, see:
    *http://kb.mozillazine.org/Preferences_not_saved
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How do you turn the cloud OFF on an iPhone 4s?

    How do you turn the cloud OFF on an iPhone 4s? I don't use the cloud, but my phone keeps telling me there's not enough storage to back my phone up.

    iCloud is probably being used to store your Contacts so perhaps you really just want to turn off iCloud backups. Use the Settings app.
    Settings > iCloud > Turn off Backup
    After you turn off iCloud backup be sure to initiate some other backup strategy. Backing up to iTunes is a good alternative.

  • How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

    How can you turn off the braille setting on an iPhone 4s, once on it won't let you slide the phone into use mode to change the settings or do anything?

    An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.

  • Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps wit

    Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps with ios7

    Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past.  With the new operating system you also swipe downward to get the search bar to find an app

  • How do you turn your music off on your ipod touch?

    how do you turn your music off on your ipod touch?

    Double click the Home button (fro a lock-screen) and the music control sill show. Tap the pause icon (two verticle parallel lines). The same from the Music app.

  • How do you turn off the pop up blocker

    How do you turn off the pop up blocker

    Hello karenlenore. You can turn on your pop-up blocker by following the instructions at this link. Let me know if this assists you or not. I'm only here to help!
    http://support.microsoft.com/kb/909604
    Mario

  • How do you turn off the Mac book pro monitor when using dual monitors?

    How do you turn off the monitor on the mac book pro and only see your second monitor?

    You close the lid and run in "clam-shell" mode
    http://support.apple.com/kb/HT3131?viewlocale=en_US

Maybe you are looking for

  • Mistake in A/R Credit Memo

    Hi, I've made a mistake in A/R Credit Memo, not with the quantity but is with the unit price. There's no base document for this credit memo. Correct unit price = 200 But somehow I changed it to 250...accidentally Is there anyway that I can adjust the

  • Don't know if I've been charged several times thro...

    Hi, I got an email purporting to come from Skype this morning saying that there was a problem paying €28.75 auto top-up. I checked my Paypal account and it says that Skype have completed two payments for that amount and another EIGHT payments for €11

  • Raw device support in 11gr2

    We are currently running oracle 10.2.0.4 RAC using raw devices on the hpux itanium 64bit platform. We want to upgrade to 11.2.0.3 and I am wanting to know what parts of of database environment will still be able to utilize raw devices? Can my datafil

  • Stacking dropdown greyout

    My stacking dropdown is greyed out in Lightroom 1.4. Can anyone sugest a remedy ? Thanks

  • Enhance Infotype 2011

    Hi. Is there any way to enhance infotype 2011?? I'm going through pm01 transaction but i got an error message?? Anybody can help?