How do you type a note with S Pen, instead of writing it in the note section?
I don't write too well with the S Pen, How could i just type a note?
If you mean while in the S Note app. Open a new note, in the bottom right corner next to the settings wheel you should see a hand Make sure you touch that icon to remove the circle with a slash off of it and that allows free hand note taking. Then at the top of the note touch the T icon wiht the line under it and that will bring up your keyboard so that you can swipe or enter your notes by texting on the keyboard.
As far as action memo is concerned, I think this is an S pen specific app and I haven't found a way to enter text in the fashion you have asked. Hope this helps.
Similar Messages
-
Hi how do you type a hashtag on a macbook air???
hi how do you type a hashtag on a macbook air???
Open the International pane of System Preferences(this may be different in different Mac OS X versions), enable the keyboard viewer and the input menu, open the keyboard viewer, and hold down Option, Shift, or both, until you see a hashtag in the viewer.
(70250) -
How do you associate a view with a form?
How do you associate a view with a form and make it accessible in the form?
Try this
<Field name='myview'>
<Display class='Text'>
<Property name='title' value='My View'/>
</Display>
<Derivation>
<invoke name='getView'>
<ref>:display.session</ref>
<concat>
<s>User:</s>
<ref>accountId</ref>
</concat>
<map>
<s>authorized</s>
<s>true</s>
</map>
</invoke>
</Derivation>
</Field>
<Field name='myview.waveset.organization'>
<Display class='Text'>
<Property name='title' value='User Org'/>
</Display>
</Field> -
How do you burn videos taken with my Iphone 4S and stored on my computer to a DVD disc. I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"? I also tried using Real Players file converter with no success! Thanks in advance for any help you can give!
Probably the OP is no longer paying attention to this unless the OP is subscribed to this discussion. While not really an iPhone question I guess using an iPhone to produce the movie which then needs taking to the next step makes this as good a starting place as any unless you happen to know enough about what to do to determine in which forum to post. A suggestion in that direction would help.
Anyway, Apple is backing off from supporting optical media. It also depends upon what you mean by "DVD". A DVD is just an optical disc which can support different file formats, but many people think it means a movie disc you can put in your TV. Producing a movie disc requires special iDVD authoring software Apple used to sell but stopped several years ago. I don't know if the old versions work under newer systems. There's also the free Burn application which authors DVDs but takes a bit of learning and has nowhere near the features of iDVD.
If the OP means simply burning the transferred movie files to a DVD for archiving in computer format you don't need special software for that; its built into the operating system File > New Burn folder etc. -
How do you move photos NOT taken with ipod ONTO the ipod?
How do you move photos NOT taken with ipod touch ONTO the ipod touch - click and drag isn't working. Thanks.
You can sync them via the iPod's Photos configuration pane in iTunes. See here for more information and instructions.
iOS and iPod: Syncing photos using iTunes
B-rock -
How do you manually manage podcasts with the new iTunes?
Like the subject line says: How do you manually manage podcasts with the new iTunes?
With the previous version of iTunes, when I plugged in my iPod, I could select the iPod, select podcasts, and manually delete episodes. With the new iTunes, I can't select individual episodes when looking at my iPod through iTunes. Is my only option to Sync? If so, why is that my only option?
This question probably has a simple answer, and I'm just not seeing it.Rock,
I think I figured out a way to do what you want to do - which is the same way that I use Itunes with my Ipod. (My Itunes libary was destroyed last year so I can no longer auto synch my Ipod as I would lose thousands of songs).
Funnily enough, I discovered this new way of manually moving podcasts while trying to figure out what cpragman was trying to say (I never could - he must be smarter than me, as I couldn't get his method to work).
1. Open up your Itunes in your regular Library view. Choose Pocasts from the left hand side (either in the sidebar if you have that enabled, or from the little "radio" icon if you don't.)
2. Mouse to the podcast you want to place on your Ipod.
3. Right-click it. A long menu will pop up.
4. Move to the "Add to Playlist" option. As you hover, all your playlists will be visible. But at the very top will be the name of your Ipod itself (whatever you named it originally). Choose THAT name, and voila! That podcast will now copy to your Ipod and be easily available when you disconnect.
A nice feature of this method is that you can shift-click several podcasts at once and do the same thing, and all your selected podcasts will copy over (if you're like me and update your Ipod only every few weeks).
Hope this helps - let me know if it works for you! -
How do you get a line with MULTIPLE fields to WRAP ?
How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007 -
How do you structure a .book with an EDD?
Hi all,
I am learning how to convert legacy, unstructured FM documents into structured FM documents and need some help. So, I created a conversion table from my unstructured documents, created the EDD, applied the EDD to the unstructured document to create a structured document and now need to tweak the EDD.
My question is, what is the correct way to layout the EDD rules for a book using multiple document styles? For example: My book contains a title page, TOC, one or more chapters, a glossary of terms, and one or more appendixes (or is that a appendicies?.)
I am thinking the element rule would look something like this:
Element (Container): BOOK
Valid as the highest-level element.
General rule: TitlePage, TOC, Chapter+, Index, Appendix+
Followed of course by other elements required for the structure. However, I did see an EDD that I am sure was outlined like this (though I can't recall where:)
Element: TitlePage
Valid as the highest-level element.
General rule: Blah blah blah
Element: TOC
Valid as the highest-level element.
General rule: Blah blah blah
Element: Chapter
Valid as the highest-level element.
General rule: Blah blah blah
Element: Index
Valid as the highest-level element.
General rule: Blah blah blah
Element: Appendix
Valid as the highest-level element.
General rule: Blah blah blah
If the second structure is correct, how do you define the Book element? On the Adobe forum, I was told one EDD should be created for all book elements, which makes sense to me.
Okay people, fire away. Remember I am a neophyte in structured FM.
Thanks,
AdamThanks Van, that does clear it up for me... a little. My confusion now is, if I set all the book sections as valid at the highest level, then how does the book get structured as the starting point for the sections contained within it? I have tried to find a sample EDD detailing exactly this, but to no avail - my search brought up courses where this is covered, but not the actual EDD structure.
When I try to structure the book with the EDD, the book comes up red with its children elements looking just fine. Ahh! You have to love that learning curve.
Regards,
Date: Thu, 24 Sep 2009 06:43:41 -0600
From: [email protected]
To: [email protected]
Subject: How do you structure a .book with an EDD?
Adam,
Following up on some of Russ's sage advice, you asked:
If the second structure is correct, how
do you define the Book element? On the Adobe forum, I was told one EDD
should be created for all book elements, which makes sense to me.
As Russ said, your BOOK element looks fine. Not sure how far you have gotten, but when you open a document file that is in the book, its root element will be Chapter, TitlePage, Appendix, etc. That is why you have to declare each of these as being valid at the highest level. When you click in the book file window and look at the structure view, you will see that the BOOK element is the root element, and its content will be TitlePage, TOC, Chapter, Chapter,...etc. The book and all of its component files have the same EDD. The definitions for the BOOK element, as well as the TitlePage, TOC, Chapter, etc elements are all contained in the same EDD. I hope this helps to answer your question.
Van
> -
HT204382 How do you read AVI sequences with Quick Time Player ?
How do you read AVI sequences with Quick Time Player ? H2OT
Hope somebody will help, I downloaded Flip4MacWMV 2.4.4.2dmg as recommended but it did not work. can I get HELP? Thanks
-
please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
How do you start a loop with an event and end the loop when u release ....
How do you start a loop with lets say an event of some sort, whether it be holding down a key or pressing the mouse click and then stopping the loop when you release that key or mouse button.?
double c = 1.8, i = 1, max = 90, exp = 0;
final double inc = 0.002; //speed at while it increases
boolean f = false, g = false;
while (true)
while (f == false && stopMeter == false) //increasing speed going up to 90
exp = Math.pow (c, i);
i += inc;
pAngle.setText (Math.round (exp) + "");
if (exp > max)
f = true;
g = false;
} //end if
} //end while
while (g == false && stopMeter == false) //decreasing speed going down from 90
exp = Math.pow (c, i);
i -= inc;
pAngle.setText (Math.round (exp) + "");
if (exp < 1)
g = true;
f = false;
} //end if
} //end while
} //end whilethis is a snippet of my increasing increments. Its for an angle meter. I can't get it to stop, when the user clicks or does something... the program just gets stuck in an infinite loop. I am still new to java and i do not know how to fix this.You are in the wrong forum. Try this one instead: http://forum.java.sun.com/forum.jspa?forumID=31
/M -
HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(
How do you solve an issue with the card? I don't get the option of 'none'
I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
#1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
#2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
#3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
#4 Click on App Store (upper center of screen).
#5 Scroll down the screen page until you see Top Free Apps on the right side.
#6 Choose any one of the FREE apps.
#7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
#8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
What a pain in the keester, eh? -
How do you stop inadvertent contact with the touch screen? Why no Lock Button? Doesn't anyone work out at Apple?? MY Gen 7 also doesn't link to workout equipment automatically like my Gen 6 and I can't stop the bloody voiceover. Any thoughts?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
How do you turn off apps with the iOS 7 update
how do you turn off apps with the iOS 7 update
Double tap the home buttons and swipe upwards on the preview of the App (not the App Icon).
-
How do you run Adobe Reader with New Lions
How do you run Adobe Reader with New Lions?
Lion has Preview, you may not need Adobe Reader.
Preview Help
View your images and PDF documents, touch them up, annotate them, and share your comments.
Regards,
Colin R.
Maybe you are looking for
-
CS5 Mac, Application Frame, and shelled custom UIs
Just discovered that in CS5/5.1, when Photoshop has "Application Frame" turned on and an image is opened not in tabbed mode (ie. is floating), when we launch our custom UI is shows up BEHIND the image. Our custom UI is actually run a separate process
-
I'm trying to figure out how much processing horsepower I need to be able to run Flash Media Live Encoder 2.5 on a laptop. When I click on the "Requirements" link on the site I get shown what Flash Media Server requires. Does Live Encoder require as
-
Advice required using iPhoto/Journal
I am making a simple project of selected days using iPhoto Journals. Some days have a series of photos and some days have photos plus a short (1m 50s) video clip made with iMovie). Other days I have made a short 'movie' slideshow of photos backed w
-
hi all does anybody know how can i map between pixels and cm? taking into consideration i don't have the real picture's dimensions how can i tell the cm distance between 2 points on that picture but ofcourse i know the pixel distance between them? th
-
Dear MDM Specialists, I am unable to find the std MDMGX extractor config. files for Vendor & Customer. Where can I find them ? Also Is there anything special to be considered while downloading fixed values from Domains from ECC 6.0 using MDMGX. I tri