How do you un-nest?

I'm working on an effect, and I nested the video. I have an idea and need to un-nest the clip, but I can't remember how.

Double click to open the nest in its own Timeline. Select All, copy and paste into your other Timeline.

Similar Messages

How do you add a MAC address to air port so it will recognize a Nest thermostat

How do you add a MAC address to anAir Port

In a v5 utility it looks different to a v6 utility.. and you should not be using MAC restrictions anyway, unless you have time controls. MAC filtering is not adequate security.
There are only two options Timed Access or Radius.. you cannot use Radius without a Radius authentication server.
Clcik the + symbol and add the MAC address.
Make sure the time limits are not restricted if you want permanent access.
BUT this is just the wrong way to do things. Use proper security WPA or WPA2 with a password. not MAC filters which are next to useless.
If you have issues getting your NEST to connect to the Airport, set the wireless name to correct SMB standard. That means short, no spaces and pure alphanumeric. The current name is probably not compliant to SMB network standards hence the NEST cannot connect.

What is a nested sequence and how do you create it?

If you nest a sequence of 5 clips does it become one clip? So how do you make one? I understand that to nest a sequence you highlight the clips you want in the browser and drag them into the viewer. The viewer only shows one of the clips though and the rest are stacked in the recently viewed files. So then what? Am I even doing any of this right?
Sputnik

A nested sequence is a sequence that contains other sequences. It's a way of organizing your work in FCE as your projects become more complex and/or your creative needs necessitate the capabilities nested sequences provide. Nested sequences are very useful for organizing complex projects, to reduce the amount of rendering needed when you are working with effects, and to control the order in which effects are rendered in your project.
Think of it this way - you capture clips from your camera. In FCE you create a sequence and you add your clips to it and then go about doing your editing, adding effects & filters, etc. Your sequence will be listed in the Browser just the same as your captured clips.
If you then create a 2nd sequence, you can put your entire first sequence into it just the same as adding a clip to it (by dragging it from the Browser into your new sequence), and then within the 2nd sequence you can treat the nested sequence as if it were a single clip - set in/out points, add effects & filters, etc.

How do you set up nested rules for iTunes smart playlist

How do you set up nested rules for a iTune smart playlist

Hello \"alice\",
It sounds like you want to add additional criteria to your Smart Playlists. I found an article with steps you can use to refine your Smart Playlist. Step 2 specifically has what I think you are looking for:
2. To have iTunes add songs that match specific criteria, make sure to select "Match the following rule," then make your selections from the pop-up menus.
For example, you might want iTunes to only add songs that are by a particular artist, or songs with at least a four-star rating.
To add additional matching criteria, click the Add button.
You can find the full article here:
iTunes: How to create a Smart Playlist
http://support.apple.com/kb/ht1801
The article says it is archived. In the current version of iTunes, in step 1 you will select File>New>Smart Playlist. Also, if you need to edit an existing Smart Playlist, you can right click (or hold command while you click) on it and select Edit Smart Playlist.
Thank you for using Apple Support Communities.
Best,
Sheila M.

How do you apply a master page to multiple documents at the same time?

How do you apply a master page to multiple documents at the same time?

Hi friends,
Thank you for trying to help me out.
Let me explain it a bit to remove the ambiguity.
I have 10 documents nested under a book. Each of these documents have 'n' number of pages. I want to apply my custom made master page "First" to the first page of all these 10 documents in one go. The remaining pages of the documents have to be in default "Right" master page format. How will I do it?
I tried selecting all the documents and importing the formats from another document with the custom made "First" master page. The master page format is getting imported but the first page of all the documents still remain with the default "Right" master page format.
I think now my question is more clear...

Keyword management - how do you move keywords up one level?

How do you move keywords up one level in the hierarchy? Sometimes when working quickly, keywords and subgroups of keywords get inadvertently highlighted and moved as a child under another keyword or group. I can't figure out how to move them back out again to the root level.

I can't figure out how to move them back out again to the root level.
You can drag and drop sub keywords to other locations higher or lower in the nested folder but you don't seem able to drag from sub level to root level.
The easiest workaround would be to have a regular Back up of the list (pop menu from icon top right keyword panel: export keywords) and when not having added new words just use clear and import the back up to restore.
If you did edit the list you can choose to export current list and with a simple text editor make the changes for keywords and sub keywords you want, save and then use again clear and import to retrieve the correct list.

How do you set the text of a Hyperlink component in code

I am using Visual Web pack in NB 6.0. How do you set the text of a hyperlink component in code?
Please see screenshots at
http://coba.usf.edu/departments/isds/faculty/agrawal/projects/java/
I have a hyperlink in a grid panel. I am using
hyperlink1.setText("Hello"); in prerender(),
but the Hyperlink shows up with the text "Hyperlink", whereas I was expecting "Hello". However,
hyperlink1.setUrl("http://www.usf.edu"); works as expected.
I tried nesting a static text in the hyperlink as suggested in the Creator guide (ed 2, Google project). I deleted the "Hyperlink" text in the properties editor but then the page turned out blank.
Thanks
Manish

Hi Manish,
Great to know you were able to fix your issue. The following blog entry has the list of resources you would like to look at for future.
http://blogs.sun.com/NetBeansSupport/entry/useful_resources_for_visual_web
Thanks
K

TS1277 there is no 'menu' under store to allow me to authoise my computer. Where/how do you do this so I can download music?????

there is no 'menu' under store to allow me to authoise my computer. Where/how do you do this so I can download music?????

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

How are you handling keyword sets?

After spending a little time keywording tonight, I like both Stamping and the "Assign this keyword to selected photo" options. Both are faster and easier than I anticipated. :-)
The one speed bump has been keyword set creation. It appears to limit each set to nine keywords. Is that right? If so, I guess you could divide long sets into several nine-word subsets. But if you want them in alphabetical order, what happens when you add a new keyword to the set? Wouldn't you need to shuffle everything that follows?
My temporary solution has been to create sets in the left Keyword Tags panel using "child of" nesting. This keeps that panel -- which otherwise sorts alphabetically without regard to category -- better organized and shorter. So far, I am keywording entirely from that side.
Does this make sense? If you need long sets or deep nesting in your sets, how are you approaching keywording? BTW, the more I use it, the better I like LR.

Alexander, what I'm asking about is how people handle long sets. If a keyword does not fall into the natural short-list category described by Mike, that doesn't mean you only use it "occasionally."
Suppose you regularly photograph species -- flowers, birds, animals -- or football teams with 85 players on a side. You don't want to type every name or drag and drop, do you? As Steve Jobs said of using a stylus: Yuck. Or Ick. Or Blech. Or whatever he said. :-)
The best solution I've found is to nest the lists in the left panel to shorten the panel, and then select images, twirl down the nested list to the desired keyword, and cmd-click to "Assign this keyword to selected photos." But that adds a step to the (IMHO) faster, easier system in Bridge.
Just asking if others have found a quicker way.

How to create dynamic nested internal table

Hi Experts,
Pleae tell me or give sample code, how to create dynamic nested internal table ?
I have seen threads saying creation of dynamic internal tables using some table structure only. But now the requirement is to create dynamic nested internal table.
For example the internal table contains two fields viz., one is field1 of dynamic internal table and other is normal field2 and values as shown below:
Nested internal table:
field1                     |     field2 ...
<table content1>     |     value2..
<table content1>     |     value2..
Here the [table content] should also a dynamic internal table.
Let me know if you need any other info.
regards
Saravanan R

see the complete code..i am currently working in ECC6.0 EHP4. just check which version you are using..
REPORT yst_test_000.
DATA:
      lt_comptab         TYPE cl_abap_structdescr=>component_table,
      ls_comp            LIKE LINE OF lt_comptab,
      lref_newstr        TYPE REF TO cl_abap_structdescr,
      lref_tab_type      TYPE REF TO cl_abap_tabledescr,
      lt_fcat            TYPE lvc_t_fcat,
      ls_fcat            TYPE lvc_s_fcat,
      ls_dd03p           TYPE dd03p,
      lt_data            type ref to data.
field-symbols: <fs_table> type standard table.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
    i_structure_name       = 'SCARR'
CHANGING
    ct_fieldcat            = lt_fcat
EXCEPTIONS
    inconsistent_interface = 1
    program_error          = 2
    OTHERS                 = 3.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT lt_fcat INTO ls_fcat.
IF ls_fcat-ref_table IS NOT INITIAL.
    CLEAR ls_dd03p.
    CALL FUNCTION 'BUS_DDFIELD_GET'
      EXPORTING
        i_tabnm         = ls_fcat-ref_table
        i_fldnm         = ls_fcat-fieldname
      IMPORTING
        e_dd03p         = ls_dd03p
      EXCEPTIONS
        field_not_found = 1
        OTHERS          = 2.
    IF sy-subrc EQ 0.
      ls_comp-name = ls_fcat-fieldname.
      ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_dd03p-rollname ).
      APPEND ls_comp TO lt_comptab.
      CLEAR ls_comp.
    ENDIF.
ELSE.
    ls_comp-name = ls_fcat-fieldname.
    ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_fcat-rollname ).
    APPEND ls_comp TO lt_comptab.
    CLEAR ls_comp.
ENDIF.
ENDLOOP.
*Now for the Field which you want deep table then you can do like this
ls_fcat-fieldname = 'NESTED_TABLE'.
ls_fcat-inttype    = 'C'.
ls_fcat-intlen     = '000006'.
ls_fcat-rollname   = 'SFLIGHT_TAB1'. "For SFLIGHT
APPEND ls_fcat TO lt_fcat.
ls_comp-name = ls_fcat-fieldname.
ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_fcat-rollname ).
APPEND ls_comp TO lt_comptab.
CLEAR ls_comp.
lref_newstr = cl_abap_structdescr=>create( lt_comptab ).
lref_tab_type = cl_abap_tabledescr=>create( lref_newstr ).
create data lt_data type handle lref_tab_type.
assign lt_data->* to <fs_table>.
break-point.
Edited by: Vijay Babu Dudla on Apr 28, 2009 8:05 AM

How do you create a full frame sequence to change it from wide to full

How do you create a new full frame sequence to change it from wide to full screen to burn a dvd? I tried creating a new project and importing the current sequence, but it imports the entire project with all the individual clips on the timeline, what is the practical way of doing this?
Thanks
Elio

Create a new sequence using "full frame settings" and then nest the widescreen sequence in the new sequence. Now scale the nested sequence to your satisfaction.
You will also find links to many free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie

How do you transfer photos from laptop to ipad air?

How do you transfer photos from your laptop to ones ipad air?

You transfer photos during a sync with iTunes.
First organize your photos. If you're using a Mac use iPhoto to create photo albums. If you're using a PC organize your photos by creating a main photos folder. Inside of that folder creat folders and sort photos into topics or dates. Do not create any additional folders inside the first nested folder.
Then start iTunes on your computer. If you don't have iTunes on your computer download it form Apple it's free. If you already have iTunes make sure it is iTunes 11.1 or later. If it is an earlier version of iTunes update it.
Start iTunes on your computer and connect your iPad. Select your iPad in iTunes. Then select Photos from the row of tabs that are presented.
You can choose to sync photos from iPhoto or navigate to your main photo folder. Then select to sync all photos or select just the albums you want on your device.
Finally click apply or sync at the bottom of the iTunes screen on your computer.

How do you create a "sub-sequence"?

I can create a "sub-clip" in Adobe Premiere Pro as described here:
But how do I create a "sub-sequence" in Adobe Premiere Pro? You can do this in Final Cut Pro and Avid Media Composer. A "sub-sequence" is described here:
Much appreciated!

Pompey (formerly J-MS) wrote:
Nope, I think you're wrong.
I have watched the clip and nesting is exactly the same as your sub-sequence.
Nesting is nothing like subsequencing. A subsequence acts exactly the same way a subclip acts. Nesting is putting one sequence inside another.
Adobe Premiere explains nesting as:
http://help.adobe.com/en_US/premierepro/cs/using/WS3E67AF4C-B2A2-4f04-90B4-F8CCFB74B144.ht ml#WSEC1CCB36-CFD4-4d60-ABDF-B4F9BE339B05
You can nest sequences within sequences—to any depth—to create complex groupings and hierarchies. You can nest a sequence into another having a different timebase, frame size, and pixel aspect ratio settings. A nested sequence appears as a single, linked video/audio clip, even though its source sequence can contain numerous video and audio tracks.
Avid Media Composer describes nesting as:
Page 299 - http://dms.sjmc.umn.edu/Equipment_Guides/Avid_Guides/MCBasicsGuide.pdf
Nesting involves stepping into existing tracks to reveal added layers for combining multiple images and digital video effects. When the effect is applied, you can step out to view and render the effect as one segment on the track. You can nest up to 24 additional tracks within each track.
A subsequence is creating a smaller sequence from another and is independant of the master sequence.
Avid Media Composer explains a subsequence as:
Page 247 - http://dms.sjmc.umn.edu/Equipment_Guides/Avid_Guides/MCBasicsGuide.pdf
You can use IN and OUT marks to create a new, shorter sequence from an existing sequence. This subsequence becomes an independent sequence and you can edit it in the same way you edit any other sequence.
Adobe Premiere Pro does not have a subsequence ability. But it has subclip ability.
Adobe Premiere Pro explains a sub clip as:
Page 235 - http://helpx.adobe.com/pdf/premiere_pro_reference.pdf
Subclip A section of a master clip that references the master clip’s media file. Use subclips to reference discreet sections of long master clips. (See Creating subclips.)
Avid Media Composer explains a sub clip as:
Page 245 - http://dms.sjmc.umn.edu/Equipment_Guides/Avid_Guides/MCBasicsGuide.pdf
When you mark footage with IN and OUT points, either you can save the entire clip along with the new marks, or you can create subclips based on the marks you set to break up longer master clips into smaller segments of selected footage. This procedure is similar to creating a pull reel of the selects or circle takes of your best footage before editing.
Subclips do not directly reference the original media. Subclips remain linked to the master clips from which they are created, and the master clips, in turn, reference the captured media files located on your media drives. As a result, none of the original footage is lost.
Nesting is not subsequencing. Subsequences (within Avid) act the same way subclips behave within both Adobe Premiere and Avid Media Composer. My original questions was if Adobe Premiere allows your to make a subsequence - and after much discussion, no it does not.
The solution to subsequencing in Adobe Premiere:
I want to basically make a duplicate of my sequence but not of the whole sequence, only a small part.
To achieve this it's easier to mark IN and OUT on the part of the sequence you want and LIFT/EXTRACT/COPY and then create a new sequence and INSERT/OVERWITE/PASTE as Adobe Premiere stores all LIFTS/EXTRACTS in the clipboard (as does copy) into a new sequence.
Or as Jim stated above,
There's no direct analogy in PP, but you can load a Sequence into the Source Monitor and select portions of it that way. You can then add that portion to a new Sequence either as a single 'clip' (nested sequence), or retaining all the individual clips of the original.

How to override a nested class?

I'm relatively new to Java, so this may be an easy question, but how do you override the behaviour of a nested class when extending a parent class? For example:
public class MyParentClass
public class MyParentNestedClass
    public void someMethod()
      // Some functionality that I want to change
}Now I want to create a new class, let's call it MyChildClass, which extends MyParentClass and changes the behaviour of the inner class. Is this possible? What is the syntax to accomplish this? Are there any scope-related problems I should be aware of?
Do I have to extend the parent class in order to redefine the nested class, or is there some way to just override the nested class (which is all I really want to change)? Any help on this would be appreciated, I've searched both the Sun site and Google and can't come up with a really clear answer to this one.
Thanks,
Steve

That's exactly what I was after. I was trying to do it like this:
public class MyChildClass extends MyParentClass
MyParentNestedClass childNestedClass = new MyParentNestedClass()
    public void someMethod() { /* new functionality */ }
}because I have seen anonymous classes (I think they're called adapter classes) declared like this, but it wasn't working in this case. Thanks for showing me the correct way to do it, I guess in retrospect that makes perfect sense, I don't know why I didn't think of it.
Thanks,
Steve

How do you invoke Edge Web Fonts?

Assuming this is available in this release, how to you bring up the Edge Web Fonts capability?

Hi Phil,
You should be able to trigger the code hints manually anywhere in the font-family value by pressing Ctrl+Space. It should also pop up automatically if you type "," followed by a space anywhere in the value. Are those approaches not working for your code? (If so, please post a snippet of your CSS here so we can investigate).
- Peter

How do you un-nest?

Similar Messages

Maybe you are looking for