How do you un-remember a saved password?

how do you unremember a password on firefox 5?

Have you tried Tools->Options->Security tab->Saved passwords button?
There you will see your password and be able to remove it.

Similar Messages

My question is Itunes related. How do you prevent a playlist saved in Itunes from alphabetizing the song list created. I wanted to keep the original order, and somehow everything was alphabetized without requesting it.

My question is Itunes related. How do you prevent a playlist saved in Itunes from automatically alphabetizing the song list. I had a specific order of songs that I wanted, and Itunes somehow automatically alphabetized them. Is there a way to turn that feature off, and/or get them back to the original order? I also noticed that once a playlist has been created, I cannot manually changed the order of the songs from my desktop.. Any suggestions?

That's just the sort order. It's displaying the media alphabetically because you have clicked on the NAME column near the top of the iTunes window.
Click on the little triangle above the column of numbers (usually on the far left side of the main iTunes window) and the media will sort in the order in which you added each item to the playlist.
You can easily reorder songs within a playlist: Click and HOLD on the song you wish to move, then drag-and-drop it wherever you like.

How do you restore after forgetting a password on a ipod?

how do you restore after forgetting a password on a ipod?

If you forgot its password the iPod has to be restored. Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the Pod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector)release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the iPod in iTunes and choose "restore from backup".

How can you change default persmissions saving files

Mac OS 10.5.8, intel based Mac Pro
When I save a file it has the permissions RW RW R. There is another 10.5.8 non-intel Mac Pro then when they save a file to the destop, it is RW R R. How do you change the default saving permissions? I want it always to be RW RW W.

I found it!
http://support.apple.com/kb/HT2202
you need to create /etc/launchd-user.conf at noted in the URl above with umask 022 in it.
BDAqua - Thanks for the reply. After I created the file and logged out/ back in, I had to change the permissions on the folder also.

How do you reset an apple ID password, when you can't remember (or reset) the password of the linked account?

Hello!
Finally got around to restoring the settings on our old iPhone 4ses, however, in order to do so for my husband's old phone, we need to turn off 'find my iphone'. The problem is that he cannot remember his apple ID password (and never set up the security profile in its entirety, so no good there), nor can he remember the password of the linked email address (which is an apple one).
Does anyone know how to go about remedying it? Sure, you can request a new password, which is sent to the account linked to your apple account, but what if there's no way to access the linked account (or reset that email accounts password, as it is an icloud account and redirects you to the reset apple ID site)? It's driving me nuts!
I hope this makes sense - am feeling less than thrilled right now.
Thanks in advance.
cheers
Zoe

Thanks for that, Roger. I had tried to access support through their website, but kept getting a message along the lines of 'no solution found'.
For reasons unknown, I decided to update the software on the phone, and was then able to restore settings that way. Weird, but I'm happy that I didn't have to resort to violence towards the phone!
Thanks again.
cheers
Zoe

How do you re-set an iPhone password when your child, the comedian, thought it was funny to change the four digit code, and now cannot remember what he put in? Thanks

How do you re-set the four digit password when your son, the comedian, thinks it was funny to change the password, but now cannot remember what he changed it to? the phone goes inactive for 60 minutes, but I can't figure out how to get a reset. Thanks, kel

You're in trouble. You'll have to force the phone into recovery mode & restore it to remove the passcode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

How do I reveal a Firefox saved password?

I have a password saved on my Mac for a log in to a website and need to re-enter it again but unfortunately as it is saved, it now only appears as a series of dots - ie '..........'
How can I reveal what it says? This is a tax return so its quite important!!
Thanks
N

In Firefox in the menu bar go to Firefox>preferences>security and provided you checked Remember Passwords for sites click on Saved passwords button and then highlight the site>Show passwords.
Message was edited by: hpr3

How can I merge bookmarks and saved passwords from two computers onto one computer?

Before I got rid of my old computer, I backed up my profile folder on a thumb drive. Then, I got a new computer and started customizing firefox, adding bookmarks and new saved passwords, without ever uploading my passwords and bookmarks from my old computer 's profile. How can I add the bookmarks from my old computer's profile folder onto my new computer's new firefox profile?

That is about saving your current bookmarks to an HTML file because you would lose those when you restore a JSON backup from the backup.
*Bookmarks > Show All Bookmarks > Import & Backup > Export Bookmarks to HTML
*Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML

How do you get rid of master password promt box?

How do you get rid of the master password prompt box without getting rid of using the master passwords feature? I like that my passwords are locked so no one can see them but I get annoyed when I have to type my master password in every time I open up a web page. Would like to only type in master password when I want to view my saved passwords. Does any one know how to remove the annoying box?

Sorry, that isn't the only purpose of the Master Password feature, "locking" your Saved Password dialog from being viewed.

How do I change/update a saved password in the security tab when I use the Master password?

I have a long list of saved passwords in the passwords section of the security tab in Tools>options. I changed my password for my browser but the master password still provides the old one. How do I update the password in Tools>options>security>passwords?

You can start Firefox in Safe Mode and check if one of your extensions is causing this problem:
http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_4-restart-firefox-in-safe-mode

How do you reset your sim card password?

how do i reset my sim card password?

Settings > Phone > SIM PIN lets you change. That's on iOS 6. I think it was slightly different on iOS 5, not sure where it was then.

How do I print out my saved passwords?

I want a hard copy of my saved passwords for future reference.

See:
* http://kb.mozillazine.org/Password_Manager
The code only works if you are using a Master Password.
You may want to open a few (3) extra windows and open at least one tab with a page in each and close them to remove the window with your passwords from the Recently Closed Windows list.

How can you share files from saved on your mac os to windows?

I recently added Windows 7 Ultimate into my MacBook Pro just a few days ago using Bootcamp. I'm just wondering if I can share my files, like any videos, documents, or such things, saved in my MacIntosh drive (or wherever I saved my things into) and somehow open it back up in my Windows. Is it possible? And, how can you do it if it is?

When transferring a project from one computer to another,to stop errors such as these, its essential to ensure that the project is copied with all the files and folders in exactly the same locations. Also before opening the project on the new computer, you need to set up a new project and set all the preferences to be exactly the same as on the first computer. Then when you open the project, premiere will find all the files in all the right places. Even then you may need to re-link some files. Just follow the prompts when Premiere asks "Where is file...."
We use USB hard drives to store students projects on and they are used on many different computers without problems, as the preferences are all set to be the same.

How do you unlock iphone when forgotton password and phone is disabled?

phone is disabled, wont reset on computer

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

How do you re-set the master password without knowing what it is?

I set up a master password, and can't remember it. I haven't activated the filevault, so from what I read, that is good. But I still don't know how to re-set the master password if I don't have the old one to change it. Please help. I have too many albums in iTunes, documents, and calander events that have not been backed up, so I don't want to reinstall the software, if that is an option. At least not until I can pick up an external backup.

I forget where I read this, but to eliminate an existing filevault "master password", delete the files 'FileVaultMaster.cer' and 'FileVaultMaster.keychain' in your computer's main '/Library/Keychains/' folder (not through "Keychain Access.app"). You should then be able to set a new "master password" in the "Security" preference pane if you ever decide to use "filevault" again. Note that if you do this while an account is still encrypted (ie. with filevault enabled), that account will not be accessible with the new "master password".

How do you un-remember a saved password?

Similar Messages

Maybe you are looking for