How do you 'unfavourite' a clip

A clip that I have made favourite, how do I unfavourite?
Cant see anything in the menus and no option when right clicking
Thanks
Omar

U for Mark>Unrate.

Similar Messages

How do you bump a clip?

Just got CS4 for the Mac, and I'm trying to figure out something I remember doing a lot in CS2: how do you bump a clip (or group of clips), like 5 or 10 frames in either direction? I forget even the technical term for this. I have a lot of short clips I have to move back and forth, and a keyboard shortcut to quickly move them would really be handy.

Alt - >
or Shift - ALt - >
on PC

How can you export a clip selection from FCPX to motion? Round tripping?

How do you export a clip selection out of FCP into Motion? In Motion, you have the option of exporting a selection out of motion? I don't understand why FCPX does not have this functionality. I do not want to export an effect or transition. FCPX is good, but it looks like the application team have no clue about workflows. Especially integration between FCP and Motion.

Not sure if you are asking a question or having a rant .. also not sure what your point is about it being 2013 ? Roundtripping is not in these apps .. sold for very little (relative to FCS which did roundtripping) and most of the functionality used daily from Motion is now in FCPX in one way or another. Perhaps it would be a 'handy' but to highlight this as some BIG deal is a tad missing the point ... .
What exactly is it you cannot do in FCPX and need to send to Motion to work on ?
These may help you with the basics of new compound clips ...
http://play.macprovideo.com/finalcutprox103-editing-in-the-magnetic-timeline/1
http://www.youtube.com/watch?v=lZdjTtF8Qqo
Jim

How do you make a clip move on a frame

how do you make a clip move on a frame

777
It is not clear what you are asking about. Could explain another way?
Please start with what version of Premiere Elements you are working and on what computer operating system it is running?
From what you wrote, I am not sure if you are saying
a. The Timeline Indicator is stuck and will not more from left to right when you try to play back the Timeline content in the Edit area
or
b. You want to create an animation
or
c. You are doing a Picture in Picture (PiP) and want the picture (or video insert) to move to different locations within the frames over the course of
time.
or
d. Other
We will be looking forward to your clarification with details so that we can give you the information that you seek.
Thank you.
ATR

How do you split a clip to do an insert edit in iMovie 08?

How do you split a clip to do an insert edit in iMovie 08? I have a single, long event that I'd like to do insert editing on. I'd also like to insert transitions. Can anyone tell me how to do this?
thanks!!
- Dan

How do you split a clip to do an insert edit in iMovie 08? I have a single, long event that I'd like to do insert editing on. I'd also like to insert transitions. Can anyone tell me how to do this?
1) Move a clip (or any portion thereof) from your Event clip to your project and place it where you need it.
2) With the newly added clip still selected in your project, grasp and move the right and left handles to set the exact frames you wish to use as your "in" and "out" points.
3) Select the "Spit" option to segment the selected area into what you want to keep and what you don't need.
4) Select the segment(s) you don't want and press the "Delete" key to remove it/them from the project window.
5) Repeat as needed to create your sequence of segments and then add titles and transitions as needed.
Note: Since your editing in iMovie '08 is non-linear, non-destructive, and "by-reference," you can source the same content multiple times to a single project or even to multiple projects and overlap your "splits" since they are "logical" rather than physical.

How do you send a clip to Motion and back?

I've done a search on the internet and I don't see a simple answer!
I've filmed some stuff which is shaky so I want to do this:
Take the edited clip
Put it in Motion
Stabilize it
Bring it back to FCPX exactly where it is in the timeline
How are you guys doing this? My process of exporting/importing seems very laborious!

Right click a clip or marked portion of it...
When you are finished in Motion, save the project in the same place as your other footage. It should replace the clip on your Timeline automatically.

How do you 'unreject' a clip?

this is maddening...how can I 'unreject' a segment of a clip?
and how do I delete rejected clips?! space saver doesn't allow me to...it says'unable to reject clips'...ahh!

When video from supported still camera is in iPhoto, iMovie can edit it without any conversion. However, iMovie will not delete any clips that are "owned" by another application such as iPhoto.
If you want you can take the video out of iPhoto and import it into iMovie with the File/Import command. It will then be in iMovie and you can reject certain clips.
For some formats, iMovie may not be able to handle the file. In this case, you need to convert the file to an imovie compatible format before importing. You can generally do this with MPEG Streamclip, but if you open your video in QuickTime Player and click command-I, the inspector will open. You can look next to the word "Format:" and report back what audio and video formats are contained in your video. Than we might recommend some specific conversion (or no conversion).

How do you remove web clip from home page?

Hi,
Thanks as always.
I accidentally added a web clip of a web page to my home page, how do you remove it?
I thought I was making the page the default home page for safari, obviously not…
Thanks

Sorry about that - although your post is listed first, the time indicated when posted for each of our posts is identical.
If I could transfer the 10 points to you, I would.

How do you make a clip slow down

I'm new to final cut so I hope this question(s) isn't too naive. First of all I have imported a clip that has a world turning right before a transition into something else I don't want (ie I only want the world spinning). But whenever I select the range I want, and remove the rest, if drag the desired clip longer the old (unwanted material shows). So clearly I'm not cutting or deleting properly. Assuming I have the clip I want, the other problem is that I'm trying to match it to audio which is considerably longer (like 6 minutes versus 40 seconds). There is no obvious place to cut and make a copy (loop) without it being noticeable, so I thought it might be better to simply make the clip run in slow motion and match the duration to the audio clip. How do you do this?

Simple. Select the clip (or portion of the clip) you want to slow down. Go to the "Modify" menu, then go to "speed." Type in a new percentage (50%, for instance, will make the clip run at half speed). I also suggest checking the "frame blending" box....it should make the slowed-down clip look smoother (you can try it both ways and see what looks best to you). Then render the clip (from the "Sequence" menu) and you're done.

How do you export multiple clips out of Premiere CC

It's listed as a feature numerous times in the forums but I haven't been able to export cut down stock footage as individual clips. Can someone please direct me on how to do so.
Thanks!

Ahhh, yes.
Adobe goofed on this one. When you export a sequence, the default is properly set up for In to Out range. But when you export a clip, the default is Entire Clip. This makes NO sense to me. Why would anyone want to create an exact duplicate? It seems much more likely that exporting a clip, you want only the In to Out far more often.
Unfortunately, there's no way to change this when selecting multiple clips. You can only change that setting when you send a single clip.
Please let Adobe know you want the default for Sequences and Clips to be In/Out range.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
In the mean time, I'm afraid you're stuck setting up one clip at a time.
I'm on Windows, so I can't help with the ProRes issue.

IMovie How do you join video clips that have been split

In Imovie project, How do I join video clips that been split

Hi
And if the clips are not contiguous - Then You have to do as in all versions of iMovie from the very beginning.
• Put the clips into one new project
• Export this as full quality QuickTime movie
• Import this new merged QT-clip into Your main project
This is a way around that are very basic and used whenever more elaborated scenes are prepared - e.g. multiple text clips or when in need of adding several functions into it.
Tedious - but it always been like this - in contrast to FinalCut.
Yours Bengt W

How do you move a clip from one event to a different event

Can't find anyway to do this. Seems pretty likely I'm overlooking the obvious.

Not sure what you mean. If you mean move clips from one event to another, you can just drag them in the Libraries pane. Or go to the File menu and use the Move Clip command.
If you mean from one project timeline to another, use copy and paste. Or just edit the edited source clip from the event in the browser to the other timeline.
Russ

How do you add video clips to an iPhoto slideshow?

I've made a slideshow for my daughter's graduation. I tried to include a couple of video clips in it, but when the slideshow gets to the first one the screen goes black and the video doesn't play. How do I do this the correct way? I use iPhoto '11

Do the video clips play in iPhoto at all?
What theme for the slideshow are you using?
Where are the video clips from?
Are you using any transitions between slides particularly the video clip?
Have you tried putting the video clip in a slideshow by itself and see if it will play?
OT

How do you inverse a clipping mask

I'm working on a tshirt and can only use 3 colors (Green, Black and Yellow). If you look at the attached image, I need to make the brown color that is inside of the squirrel mask out the items behind it (corn stalks, rectangle and part of the "R" in "Corn Maze". The tshirt will be grey so once the Clipping Mask is applied, it will allow the grey tshirt to become the color for the squirrel.
The problem I'm running into is if I duplicate the squirrel and use him as a clipping mask, it does the opposite of what I'm trying to accomplish. I need to mask out everything inside the squirrel, not everything outside the squirrel. In photoshop, I could just inverse the selection. Not sure how to inverse a Clipping Mask.
Any help would be greatly appreciated.

[scott w] wrote:
Monika Gause wrote:
Then it would be about how I would pronounce it, anyway ;-)
Wouldn't that W sound like a V?
In German: yes. But non when I#m trying the skquawirrrrrel in English ;-)
@Students:
Everything needs to be grouped:
For just the squirrel (not its nose or other details) you set the fill to opacity 0
Sorry for the German panels:
Aussehen = Appearance
Ebenen = Layers

How do you split video clips?

I want to split video clips so that they can begin when I want them to and end when I want as well. I'm new to the software and I don't really know how to do some things.

There's a lot of good info in your manuals. Always a good place to start. I'd also reccomend Tom Wolsky's (he's a regular contributor here) books.
Having said that, basically, take your clip and put it in the Viewer. In the Viewer, shuttle around till you find the piece you want .. set an In point where the shot should begin, set an End point where you want it to end. Now grab that shot in the Viewer and drag it over to the right; some little submenus will pop up, choose Overwrite and that puts it into the Timeline. You can also use F10 to overwrite the short to the Timeline.

How do you 'unfavourite' a clip

Similar Messages

Maybe you are looking for