How do you unlock iPhone 5 which has been found by owner

How do I unlock an iPhone Verizon phone that I thought lost but found it?

Similar Messages

HT201401 Need help to enable my 3g iPhone which has been disabled due to forgotten passcode

HI....Need help to enable my3G iPhone which has been disabled due to forgotten passcode.Thank you

If you forgot your passcode, restore the phone on the last computer it was synced with. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode and restore as a new device. See http://support.apple.com/kb/HT1212.

How do you unlock iphone when forgotton password and phone is disabled?

phone is disabled, wont reset on computer

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

How do I unlock 4S that has been upgraded to iOS 7. Entered passcode does not work

How do I unlock 4S I phone that has just been upgraded to iOS 7? The submitted code does not work.

See here: http://support.apple.com/kb/HT1212

HT4623 how do you unlock iphone 4s

how can i unlock my iphone 4s contract is with virgin media.Thank You.

Contact Virgin to determine their unlocking policy, and if you qualify.

How are you sure your phone has been unlocked?

Wondered how you are sure that you phone is unlocked before you ship it??

Hi there karenfommims,
You may find the information in the article below helpful.
iPhone: About unlocking
http://support.apple.com/kb/HT5014
-Griff W.

How do you unlock iphone 4s

i have uk iphone 4s locked to o2 have requested for phone to be unlocked now waiting for code from apple upto 72 hrs what do u do when u have the code please help

The link above provides all the steps.
Back up and restore your iPhone, iPad, or iPod touch with iCloud or iTunes - Apple Support
Restore
If you have a new iOS device, or if you need to restore your device to resolve an issue:
Connect your iOS device to the computer that has your backup.
Install the latest version of iTunes.
Choose File > Devices > Restore from Back up.

Deleting music from my iphone which has been deleted from itunes on my mac

Hi,
When I downloaded Angry Birds from the Mac store, the sound effects appeared in my itunes library on my Mac. I have deleted them from the itunes library on my mac, but they are still on my iphone. ANy ideas on how I can delete them will be gratefully received!
Many thanks and merry Christmas
Alison

Thanks so much, it works! Appreciate you taking the time to help.
All good wishes
Alison x

How do you remove contacts that has been copied to the SIM Card on Q10?

I copied them and now I want to delete them how do I do it? Plus it does not should how much space is on it?

Within the Contacts app filter your list to just show Sim entries, the tab on the left.
Hold down your finger on the contact and a side menu will appear on the right at the bottom click on the trash can to delete that entry.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

HT1212 How do you unlock iPhone when its disabled and will not connect o iTunes

My iphone is locked. Says iPhone is disabled, connect to iTunes. But when i connect ot iTunes it does not connect. Tells me to put in my password inwhich I cant because it is disabled. This is an iPhone 4 that is not used as a phone but an iTouch for my daughter. No phone capapbilities.

power your phone completely down, plug the cord into the computer but not the iphone. Once the phone is completely powered down hold down the home button while you plug in the phone and continue to hold it down until you see the iTunes icon. that is recovery mode. Restore to manufacture settings. Unless you have a back up all your info will be lost

How to unblock a row which has been partial received?

Dear everyone,
I just have a trouble and need anyone help me.
Here is the case...
There is a PO with a row of 200pcs ordered.
Partial of them, say 50pcs, are received.
Then what happened on that row is that, as you know, the fields in that row except Qty and 'Del. Date' are all blocked, even for UDF.
-- I really need to be able to rewrite info on those UDFs in the row. Is there any way to enable me update data on those UDFs.
Thank you
Tony

Thanks, Gordon
The situation is that the client has a needs to record shipment status for each row (or each item). Continuing the example I gave in the first thread, the client ordered 200pcs on 08/15. later the vendor sends a notification that 50pcs will be delivered on 09/21. It means that the rest of them must be received on or after 10/18. (Because the vendor has a delivery schedule.)
On 09/21, the 50 pcs are received.
on 10/02, the vendor sent the second notification that 30pcs will be delivered. at this time, I need to record the follow info:
"--- 30pcs for 10/18, 70pcs for 11/19(following the vendor schedule) "
there are many rows(items) in a PO.
since the row is partial received, I just cannot update the above info in the row.
thanks
Tony

How to include Search Help which has been created using SE11

Hi all,
I have created the custom search help in SE11. What is the way to include it in my code? Thanks in advance.

Hi Mil,
There are different ways of using the search help created by SE11 depending on the kind of application you are using.
1. Search help can be attached to a DATA ELEMENT under the tab FURTHER CHARACTERISTICS.
Now wherever this data element will be used, automatically the search help will be available on the output screen. e.g. in selection screen using parameters statement etc.
PARAMETERS: P_VAL1 TYPE Z_DATAELE.
2. Search help can be also attached to database table fields directly in the tab Entry help/check. Now wherever this database table field is used e.g. in SELECT-OPTIONS statment, the search help will be automatically available on output selection screen.
3. Also, search helps can be directly used in the programs using function modules and event.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
Here in the module, you can use following function module for fetching the search help on the screen.
F4IF_FIELD_VALUE_REQUEST
4. Search help can be direclty attached to the selection screen statements like SELECT-OPTIONS using MATCHCODE object extension
SELECT-OPTIONS: LP_STATS FOR TJ30-ESTAT MATCHCODE OBJECT ZH_TJ30 NO-EXTENSION NO INTERVALS.
Hope this sort out your issue.
PS If the answer solves your query, plz close the thread by rewarding each reply.
Regards
Message was edited by:
Sapna Modi

How to delete an attachment which has been published to a catalog

Hi folks,
11.5.10.2
We have enabled the Attachments function on JTF Define Resources (JTFRSDEF) form.
Once an attachment is uploaded, we also publish it to a catalog.
Is there any way to delete an uploaded / published attachment?
Kindly help.
Thanks in advance.
Edited by: user12003895 on Jul 15, 2010 2:42 PM

You should not delete an asset. You should retire it. Period.
If you have 300k assets to be retired, then instead of doing it manually, you can try the following options.
1) Mass Transactions > Retirements
2) Retirement API
3) Using the FA_MASS_EXT_RETIREMENTS interface. First populate FA_MASS_EXT_RETIREMENTS table and then run the "Post Mass External Retirements" concurrent request.
Hope this answers your question
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant

HT1438 how can you unlock an iphone 4 after is has been disabled?

how can you unlock an iphone 4 after is has been disabled?

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

How do I unlock iphone 5 that has been completely disabled, tried going to itunes?

How do I unlock iphone 5 that is completely disabled? It says to go to itunes, when going to itunes it says I need to have phone unlocked! Thanks!

If you mean your passcode lock:
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.
If you mean unlocked from your carrier, then contact them as they are the only ones who can unlock the phone.

How do you unlock iPhone 5 which has been found by owner

Similar Messages

Maybe you are looking for