How do you unlock your iPad if you forgot your password

How do you unlock your iPad if you forgot your password

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Similar Messages

  • How do you unlock ur ipad when u forgot ur password

    i forgot my passowrd when i changed it to the new one

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • How can I unlock my iPad when I forgot my password?

    I haven't used my iPad in a long time and I forgot my password. I tried to restore it, but because I have Find My iPhone enabled it won't let me. What should I do?

    Is Find My Phone turned on?
    You'll have to login to iCloud.com, from any computer, locate, then erase your phone. Once done, restore from backup, if you have one.
    That's the only way for you to fix this.

  • How do I unlock my phone if I forgot the password?

    How do I unlock my phone if I forgot the password?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • How do i unlock my ipod.  I forgot the password

    how do I unlock my ipod?  i forgot the password

    A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to
             update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT201412 how do i undisable my ipad if i forgot my password and the password key pad doesnt even show up?

    how do i undisable my ipad if i forgot my password and the password key pad doesnt even show up? i tried to restore it but it didnt work it still shows the same screen.

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How can i unlock my iphone if i forgot my password?

    how can i unlock my iphone if i forgot my password?

    Read here:
    http://support.apple.com/kb/ht1212

  • How can i unlock my phone when i forgot the password

    How can i unlock my phone if i forgot the password?

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • How can I reset my iPad that I forgot the password to my linked account.

    My iPad is linked to an old gmail account of mine that I believe has been hacked.  I have tried everything to
    reset my gmail password and it hasn't worked.  I think someone changed all of my information.  I have
    tried to reset my iPad by holding down the home button and power button and connecting to iTunes.  I
    did the restore but now it is saying "This iPad is currently linked to an Apple ID. Sign in with the Apple ID
    that was used to set up this iPad."  It provides me with the Apple ID: m*****@gmail.com and wants me
    to enter the password but I don't know the password and have tried everything to retrieve it.  There's nothing
    on the iPad so I don't care about erasing any data.  How can I reset the iPad so that I can use it?  Is there
    another method besides the one I have already tried?

    If your iPad is running iOS 7, there is no way you're going to be able to regain access to your iPad without the password for the Apple ID used by that iPad. You cannot even restore the iPad to factory settings without the password. This is an anti-theft feature.
    You will need to contact Apple and try to regain control of your Apple ID. It is entirely possible, however, for the hacker to make changes to your Apple ID that would make it difficult or impossible to do that. You need to act as quickly as possible!

  • How can I access my Ipad when i forgot my password?

    I forgot the password for my Ipad and now I can't use. What do I do?

    Tsk! Tsk!
    Unbelievable how many people forget their passwords.
    See if this thread will help you:
    https://discussions.apple.com/message/19699881#19699881

  • Ipad states ipad disabled connect to itunes. When I do it tells me passcode it locked.  How do I unlock the ipad when you can't remember the passcode?

    My daughter (honestly) forgot her passcode to her ipad 2 and she is now locked out.  It states:  iPad is disabled connect to itunes.  When I connect to itunes it tells me to enter my passcode.  How do I get fix this?

    Here is a kb that describes what to do.  Go to the section that says "placing your device in recovery mode"
    http://support.apple.com/kb/HT1808?viewlocale=en_US
    This will "nuke" the device....as iPaqd26 said, it's best if you can remember the device pass code

  • How can i unlock my phon if i forgot my password

    I made a new password for my phone lock, i forgot it and i have disabled it, can someone please tell me if they know how to help...?

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • How do i unlock my iphone if i forgot my password

    what could do besides reseting?

    Nothing.
    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • How do i unlock my iod when i forgot my password

    I don't know how to unlock my ipod without the password and I also broke the lock button! HELP ME!!

    It can't be unlocked. The only way to remove the passcode is to restore the iPod in Recovery Mode. http://support.apple.com/kb/HT1808

  • HT5824 How do I unlock an old iphone, I forgot my password

    I've locked myself out of my Iphone. I had it reset before in an Apple store. Is this something I can do at home?

    Hi Capitalq,
    Follow the instructions that best apply to you in this support article:
    http://support.apple.com/kb/HT1212
    Cheers,
    GB

  • How do I unlock my ipod when I forgot the password?

    So I put my ipod in recovery model and now I'm trying to restore it but it says "make sure your network settings are correct and your network connection is active or try again later". What do I do? My ipod doesn't do anything now wheni try to turn it on and I even tried charging it but nothing happened.

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

Maybe you are looking for

  • How to use iweb rss feed in an iphone web app?

    So this is my dilemma.  I wanted my iweb turned into a web app using the rss feed. This is simply done cause of the "Add To Homescreen" feature.  While the RSS feed works beautifully on safari... it does not read as a webapp. This surprised me cause

  • Preview PDF option is greyed out on my installation of LiveCycle

    Tried several things 1.) Reinstalling with other browsers, Firefox, IE as my default browsers because Chrome does not explicitly have a extension or add-on 2.) Throwing switches in Reader to allow PDF to be viewed through browsers, etc..

  • How to display list process, when i run sql*loader in c#

    Hello, How to display list process, when i run sql*loader in c#. I mean when i run sql*loader from cmd windows, i get list process how many row has been inserted. But when i run SQL*Loader from C#, i can't get process SQL*Loader. This is my code: str

  • RE: Transparent areas on images used inPictureButtons

    Thanks all for the responses. I have talked with Forte Tech Support and there is a way to get this to work. To get transparent areas in an image on a PictureButton, you simply manipulate the FillColor of the PictureButton widget itself. Apparently, F

  • List of company for Consolidate detail in Inter-company

    Hi all, Do you have any idea how i could not see the list of company for Consolidate in inter-company? As the user guide from SAP, there is more field but my own is not.