How do you update a Windows 8.1 with latest Apple drivers?

I've got Windows 8.1.1 on my mid-2012 MBP using Bootcamp 5.  I see that there is a 5.1 Bootcamp for Windows 8.1 so I assume it contains updated drivers. Is there documentation available about updating an existing Bootcamp and W8.1 installation?

Hello, trwd. 
Thank you for visiting Apple Support Communities. 
Here is some information you may find helpful. 
Boot Camp Support Software 5.1.5621
http://support.apple.com/kb/DL1720
Cheers,
Jason H. 

Similar Messages

  • How do you update software on iPad 2 with out computer

    Can you update software on ipad 2 with out computer?

    Once you have iOS 5+ installed then future updates can be installed wirelessly - but if you are still on iOS 4 or below then you will need to do your next update via your computer

  • How do you change the email address associated with your apple id

    how do you change the email address used for your apple Id I have tried going on managing apple Id and it isn't working

    Just where are you going?
    and what do you see? A screen shot with personal info redacted would be great.
    I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
    Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.

  • How do you update playlists on your iPod with the new iTunes?

    With the new iTunes, I can't seem to be able to update playlists on my iPhone device when plugging it in. I can add songs to the playlist and can add songs to my device. However after adding songs to a playlist, I can not update that playlist on my device with the new iTunes. You used to be able to just drag a playlist to the device and update it, but you no longer can. Can someone please tell how to go about updating playlists on devices using the new iTunes.

    Do you mean remove them from the iPod or transfer them back to your computer? You can't transfer photo's back to the computer with iTunes. To retrieve photos from an iPod try:
    iPodPhotoCopy Windows only
    CopyPodPhoto Windows only
    iPod Photo Liberator Mac & Windows
    To remove individual photos from an iPod you delete or remove the photo from the folder that you linked to when you set the preference "synch photos from" and update the iPod. For example, if the iPod is getting the pictures from the folder "My Pictures," delete or remove them from My Pictures.

  • HT4623 How do you update the iPhone 3gs to the latest software?

    I do not have an iPhone 4.  I have an iPhone 3gs, and am trying to update the latest software.  I have tried three times already, and each time I have to wait 2 hours so it is frustrating.  It has not worked a single time yet.  Not much on the internet talks about updating a 3gs to the latest software, but I finally found something that said I had to have the latest iTunes.  I did not have the latest iTunes, so I am trying that now.  Hopefully that works.  If there's something I really need to do, please help.  I just want the latest software.

    Connect your phone to iTunes on a PC and you will be guided from there.
    Or - you could use the search facility on this page - there are thousands of hits.

  • How do you update a geometry to null with sdoapi

    I have been able to create and insert geometries but have been unable to update an existing geometry to null using the preparedstatement setNull method. If anyone has some sample code to do this I would be gratefull.
    Joe

    Seems to me what you are doing is an overkill, why not doing it all in one hop like:
    UPDATE MyTable SET MyColum = CONVERT(int, CONVERT(binary(1),_TheHexColumn,1));
    I understand that you cannot issue an update statement so just in case, you need to map the variable value to a Execute SQL Task like that: http://www.sqlis.com/sqlis/post/The-Execute-SQL-Task.aspx
    Arthur My Blog

  • How do you transfer from an old ipad with 2 apple id (app free and purchased) to new ipad that is going to these same ids

    Basically, I have used two apple ID on my old ipad, ID 1 being primary, and ID 2 being secondary, but I've made purchases in both IDs (apps only no music)
    How, and when I moved to a new ipad, would I be able to restore both free+purchased apps on both apple IDs?
    Thanks

    I also use two Apple IDs.
    As far as getting your apps from both IDs, it's quite simple.  All that you need do is to sync the new iPad to the same iTunes that you had previously synced to the old iPad.  You'll need to load the backup only if you need the data from the game apps.  In that case, I can't confirm which is backed up (or if both are backed up) because I don't play games with a history that I care about.

  • Can and how do you buy an iTunes gift card with an Apple Store gift card?

    Hi. I received an Apple Store gift card as a gift and really want to buy an iTunes gift card with it. I looked it up and nothing returned, so just checking here to see if you guys know anything. Thanks!

    Apple Store Gift Cards can purchase this -
    Use your Apple Store Gift Card for the purchase of a new iPad, iPhone, Mac, or anything else at the Apple Online Store or Apple Retail Store.
    Basicly the Apple store gift card is for purchases such as devices/accessories etc.
    Sorry, to purchase an iTunes gift card will need another way to do so

  • HT1491 How do you update apps on itunes

    How do you update your apps through itunes when your phone is plugged into your computer?

    Go to the Apps section of iTunes - the one in the Library section of iTunes, not your iPhone:
    then click the Check for Updates button in the lower-right corner of the iTunes window. Once you have the updates, sync them to your iPhone.
    Regards.

  • How do you update the Bios safely when using onboard RAID mirror? Z87-G45

    How do you update the Bios safely when using onboard RAID with Z87-G45?   I'm using a simple two drive, RAID 1 mirror setup.
    I'm currently at bios 1.4, and want to move up.  However, last time I upgraded the BIOS, the machine rebooted with improper settings for the RAID (they get hosed during BIOS flash) and Windows decided to auto-repair the only boot drive it could see, one half of the mirror, because it couldn't see the RAID array correctly and *POOF*  bare-metal reinstall required.   
    My PC will not let me press the DEL key on bootup to access the bios, even with MSI Fast Boot not installed.  It just ignores the DEL key and tries to load windows which, if that happens, will flame-out my RAID array after a bios flash if I can't catch it to enable the RAID first before windows loads.
    I do not want to rebuild my PC again simply because I do a BIOS update.

    FYI: BIOS 1.4 & 1.8 are using the same RAID version: 12.7.0.1936
    based on this RAID surprise should not hapends.
    But as pandaz says if you have no issues, leave bios update alone.
    there are still risks something to messed up,
    best do a backup of your data just in case if you want to try latest version

  • HT201263 how do you update your i pod touch 4th generation

    How do you update your i pod

    iOS 7 will not be compatible with the 4th generation iPod Touch. It doesn't have enough RAM to support the new version of iOS.

  • HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP

    HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP
    How do you change the window size for Ebusiness Suite after you log in. Currently it displays at 100% of the screen. I want to set it smaller, at some %

    I don't know if there is a way to set this. Some user's may prefer different sizes of window, depending on their job duties. For example, we have 170 Systems document management integrated with purchasing and payables so users shrink the Oracle window to fill about 60% of the screen while 170 uses the remaining 40% to display the scanned document.

  • HT4759 how do you update icloud with contacts transferred to Iphone by verizon

    How do you update icloud with contacts transferred to Iphone by Verizon?  The only contacts that show up in icloud are the ones I entered myself to the phone.

    You'll need to copy them to iCloud in order to see them on your PC.  To do this, do the following:
    Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iPhone when prompted (they will still be in iCloud).
    Download the app My Contacts Backup.  Use this to backup the remaining contacts on your phone (from Verizon) as a vCard attachment to an email that you send to yourself.  Confirm that you have received the email.
    Go to Settings>iCloud and turn Contacts back to On.
    Open the My Contacts Backup email and tap the attachment to import the Verizon contacts back to your phone.  They should now be in iCloud, and appear on your PC.  You may see duplicate contacts on your phone because you are still viewing both the contacts from Verizon as well as the copies now in iCloud.
    Open Contacts on your phone and tap Groups, tap the Groups that were imported from Verizon so they are unchecked and tap Done.  This will hide them from view and illiminate the duplicates.

  • How do you update Samsung Apps?

    I want to know how do you update pre existing samsung apps on the Galaxy S4??
    For instance if at 6:01am and never reboot phone;  I launch S Health after a factory reset and it says 'there is an update to S Health' but I dismiss it....How do I update that app again?
    Its not on Google Play??
    So I went to the support page and it says to go to apps.samsung.com on my mobile browser which will install the Samsung App application to my device
    Yet after downloading the file it says 'You are about to update a pre existing app; do you wish to install' and I said.....WHOA where is that application on my phone?
    I do own a Samsung Note 10.1 Tablet; there is a Samsung App application on the device.
    Galaxy S4?? Nope I cant find it...I do have Samsung Hub...but that doesnt load pre existing apps such as S Health
    Does anyone else know how to remedy this? Thanks

    Need answer as well...

  • Changing SSL Cert, how do you update the trust profile for devices.

    I am in the process of changing out the ssl cert for the trust profile (going from a self-signed to a signed cert).  How do you update the trust profile on the devices already paired with the server.

    Yes, the linked smart object can be either raster or vector, but they will be placed as raster images, just as the embedded SO are.  SO can be embedded or linked to an outside file.  Edits to the original will not update in the original until you select "Update modified content from the menu" when you reopen the file that has the place SO in it.  otherwise it will update when you save the linked file.  Yes, there still is an advantage to having an embedded SO.  You may not want to maintain the links - send a file off and forget to include the linked files.  You may want to alter the SO, but not the original file.
    Ah, thanks. But does this mean that raster and vector smart objects can EITHER be located within the Photoshop file (as they have been since their advent) OR linked to an external file?
    And if so,
    1. Can this linked file be either raster or vector?
    2. Do edits to it automatically update the Photoshop file?
    3. Is ther any longer any advantage to having the smart object data stored within the Photoshop file when it can be linked?

Maybe you are looking for