How do you use a different form of payment on iBooks than the one on the family sharing account?

With family sharing, the Family Organizer is the only one that can pay for items in iBooks and other stores. Is there a way to use your own individual form of payment instead?

Archive the contacts you have in Address book, then delete them, they will be removed from iCloud as well. Restore the archive

Similar Messages

How do I change the organizer of a Family Sharing account

My husband is the organize of our Family Sharing iCloud account, and since he travels a lot, it makes it difficult for him to approve app downloads for our kids. I'd lIke to change the organizer to my account so we can avoid this, but I can't figure out how to do that and wasn't able to find anything on Apple's support site. Has anyone done this is and can give me some direction?
TIA

Here's what iTunes Podcaster help says:
http://www.apple.com/itunes/store/podcaststechspecs.html
Troubleshooting Your Feed
iTunes should update your listing at least once every 24 hours. If you made changes more than 24 hours ago that are not yet reflected in your iTunes listing, there is a good chance that your feed has broken. When iTunes encounters a broken feed, it ignores the feed and continues to display the old data.
Here is a set of recommended steps to fix your feed:
Ping your feed to make sure iTunes has attempted to update your feed recently.
Review the technical spec, particularly the example feed, to ensure that every detail of your podcast’s feed is supported by iTunes.
Use a feed validation service like www.feedvalidator.org to check for particular problems. This may be helpful in determining a specific problem with syntax.
If you used a software- or online-based feed creation service, check to ensure your settings there are correct and iTunes-compliant.
Subscribe to the feed in iTunes to see if it works. Open iTunes, go to the Advanced menu, choose "Subscribe to podcast..." and enter your feed’s URL.
Hope this helps - Podcaster's discussion board might have more answers:
http://discussions.apple.com/forum.jspa?forumID=1107

How do you use a hall effect sensor to act as a trigger to start the aqusition of data ?

On a 4 stroke engine, a hall effect sensor acts as a trigger to instigate the aquisition of data. Data is recorded from a pressure transducer on both the compression and exhaust cycle.

Paul,
Here is a great resource the help you get started:
http://zone.ni.com/devzone/devzone.nsf/webcategories/327C75ED77E1B8E5862567E80051CF83
Additionally, if you need more help, please supply information such as:
1. What daq board are you using?
2. What kind of signal does your hall effect sensor output?
3. What have you tried?
Best Regards and good luck!

How do you use Default Resource Access Information?

I have some 10g Forms & Reports that I want to use with SSO and they will all be connecting to the database with the same connection info. I know how to configure a Default Resource Access Information, but how do you use this with Forms & Reports?

Douglas,
the default Resource Access Infomation should be the connection information right? This is used in conjunction with SSO. You need to configure your F&R applications to delegate authentication to SSO by placing ssoMode=true in the config section of formsweb.cfg.
The Forms Servlet will connect to OID retrieve the Resource Access Information (descriptor) for a given user and automatically log them into the application.
Users will need a global identity in OID and SSO must be enabled to use resource access info with F&R
regards,
tt

For the same table in the same page, how to use 2 different forms (simple and tabular)?

Hello! How I can be on the same page with the same table insert and update operations using 2 different forms (single form and tabular form)
I have little knowledge of Apex, but I know PLSQL
Thanks
Ginger
Ecuador

Thank you Gramps. It took some time, but I've got it working now. I had to re-do all the user authentication actions from scratch for one of the databases, but it's finally behaving itself now. I appreciate you pointing me in the right direction.

How do you construct a web form using coldfusion??

How do you construct a web form using coldfusion?? any
examples?
thanks in adv.

A sample Form:
<cfform action="CCARProc.cfm"
enctype="multipart/form-data" method="post" name="CCAR"
onsubmit="return verify()">
<table width="730" border="0" cellpadding="2"
cellspacing="1" align="center" class="unnamed1">

<tr valign="top">
<td colspan="3" bgcolor="#F2F2F2">Name Of
Requester(<font color="red">*</font>)</td>
<td width="402" bgcolor="#F2F2F2"><cfinput
type="text" name="Requestor_Name" size="15" value="#REQNAME#"
maxlength="25" >
MTABT Email(<font
color="red">*</font>)
<cfinput name="Req_Email" type="text" size="8"
maxlength="20" value="#ReqEmail#"
>@mtabt.org</td></tr>
<tr>
<td colspan="3">Requester Telephone #(<font
color="red">*</font>) </td>
<td><cfinput type="text" VALUE="#REQPHONE#"
name="RPhone" size="12" maxlength="12" message="Requester Phone
cannot be blank / Invalid Entry!" required="yes"
validate="telephone"> [e.g. xxx xxx xxxx or
xxx-xxx-xxxx]</td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">Facility(<font
color="red">*</font>)</td>
<td bgcolor="#F2F2F2">
<cfselect name="Facil">
<option value="2B">2B </option>
<option value="BBT">BBT </option>
<option value="BW">BW </option>
<option value="CB">CB </option>
<option value="HH">HH </option>
<option value="MP">MP </option>
<option value="QMT">QMT </option>
<option value="RI">RI </option>
<option value="TM">TM </option>
<option value="TB">TB </option>
<option value="TN">TN </option>
<option value="VN">VN </option>
</cfselect>
</td>
</tr>
<tr>
<td colspan="3">Department(<font
color="red">*</font>)</td>
<td><cfselect name="Dept">
<option value="Contracts">Contracts </option>
<option value="Engineering">Engineering
</option>
<option value="Executive Office">Executive
Office</option>
<option value="Finance">Finance </option>
<option value="General Counsel">General Counsel
</option>
<option value="HS">HS </option>
<option value="HR">HR </option>
<option value="ISD">ISD</option>
<option value="Legal">Legal </option>
<option value="Labor Relations">Labor Relations
</option>
<option value="Operations">Operations </option>
<option value="Payroll">Payroll </option>
<option value="Planning & Budget">Planning &
Budget </option>
<option value="Procurement & Mtrl">Procurement
& Mtrl </option>
<option value="Purchasing">Purchasing </option>
<option value="Revenue Management">Revenue Management
</option>
<option value="Staff Services">Staff Services
</option>
<option value="SD">SD</option>
<option value="Technology">Technology</option>
</cfselect></td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">Division(<font
color="red">*</font>)</td>
<td bgcolor="#F2F2F2"><cfinput name="Div"
type="text" size="20" maxlength="25" VALUE=""></td>
</tr>
<tr valign="top">
<td height="27" colspan="3" >Justification(<font
color="red">*</font>)</td>
<td bgcolor=""><textarea name="Justi" cols="50"
rows="3" wrap="VIRTUAL" ></textarea> </td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">VP Approval
By (<font color="red">*</font>)</td>
<td bgcolor="#F2F2F2"><cfinput name="VPAppFName"
type="text" size="20" maxlength="25" VALUE="#VPFName#">
MTABT
Email(<font color="red">*</font>)
<cfinput name="VPE" type="text" size="8" maxlength="20"
value="#VPEmail#" >@mtabt.org</td>
</tr>
<tr>
<td colspan="3" valign="top"
bgcolor="#F2F2F2"></td>
<td colspan="2" rowspan="2" valign="top"
bgcolor="#F2F2F2"><div align="left">
<input name="Submit" type="submit" value="SubmitTheForm"
class="button"
style="font-size='10pt';color='#663399';font-face='Arial,
Helvetica, sans-serif';" >
<input name="Reset" type="reset" value="ReSetTheForm"
class="button"
style="font-size='10pt';color='#663399';font-face='Arial,
Helvetica, sans-serif';">
</div></td>
<td width="90" valign="top"
bgcolor="#F2F2F2"></td>
</tr>
</table>
<div align="right"><span class="style4">Revised(
01.28.05 )</span>
<input name="submitDate" type="hidden"
value="<cfoutput>#DateFormat(Now(),'mm/dd/yy')#</cfoutput>">
</div>
</cfform>

How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
Look at this very informative video for the instructions.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

How do I use 2 different iTunes Stores?

How do I use 2 different iTunes Stores simultateously? Active account in South Africa, but need to download apps from the German iTunes Store - which iTunes does not allow, as these apps do not appear on the South African iTunes Store.

You cannot do this.

I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

do I need to create another account with a different email account
Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

How can I use a different Apple ID withthe App Store?

When I access the App Store from my iPhone 3G it asks me to enter the password for an Apple ID.
How can I use a different Apple ID with the App Store?

It will use the account you are currently signed into with iTunes when you synced. So in iTunes, change your account, then sync. Then the iPhone will use that one.

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

How do you use one managed session bean from another?

Hello -
I am a complete newbie to JSF coming from Struts 1. My question is how do you use one managed bean from the method of another one? I think this would be a common senario. For example I put a bean in session scope when a user logs in and in a different method within a different bean I want to get some of this user's information. What is the correct way to retireve one bean from a method in another with session scope?
Also what would the code look like to retieve another bean from the method of a managed bean where the bean you want to retrieve has application scope?
Thank you in advance.

Sinplicity wrote:
Could you be a bit more specific? If a bean is configured in the faces config file then all of it's properties are managed, correct?Not necessarily.
What would the code look like to retireve the bean?You don't retrieve it, it has been injected.
Can I retrieve the whole bean or just a property of the bean. I would be really interested in seeing how this is done in code? And would really love a bit more information on what it means to be a managed property?Time to consult a JSF tutorial.

How do I use two different apple IDs on one itunes?

How do I use two different apple IDs on one itunes?

This would be a violation of the terms of use of the itunes store and could result in the loss of your account.
You cannot use the U.K. itunes store unless you are in the U.K

How do you use a different form of payment on iBooks than the one on the family sharing account?

Similar Messages

Maybe you are looking for