How do you use a Japanesse keyboard with IMAC?

Can you use  a Apple Japanesse keyboard with IMAC?

Paul Heinrich wrote:
Can you use  a Apple Japanesse keyboard with IMAC?
Yes, of course, that is what is used in Japan.  You can still type any language, not just Japanese.  It just has a slightly different layout.
If you have a problem after you have connected it, come back here and provided details about what is not working the way you want.

Similar Messages

  • How do you use new ipod nano with itunes 10.6.3?

    How do you use new ipod nano with Itunes 10.6.3.  I have MBP and it lists itunes 10.6.3 as most current version and won't let me install itunes 11

    The seventh generation iPod nano requires at least iTunes 10.7 and Mac OS X 10.6.
    (85225)

  • How do you sync the wireless keyboard with the Ipad?  It doesn't ever find

    How do you sync the wireless keyboard to the Ipad

    Have you read the iPad manual (Page 22)?
    http://manuals.info.apple.com/enUS/iPad_UserGuide.pdf
    and the Bluetooth Keyboard manual:
    http://manuals.info.apple.com/enUS/Apple_Wireless_Keyboard_2009UG.pdf
    If your keyboard is already paired with another device that is in range then you must unpair it first (see page of the keyboard manual).

  • How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

    How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver?  I have been trying with no such luck.
       I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth.  But for now, I would just like 2 computers to talk and then eventually talk to our own device. 
    One is a desktop w/ the Belkin F8T012 USB adapter.  It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash.  It says it cannot install it because it cannot find the necessary hardware.  I thought this USB adapter was on the approved Bluetooth devices list?  What else should I try?  Another Bluetooth USB adapter? 
    The other computer is a Dell Latitude 820.  It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module.  On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter).  It came with a serial port interface which we modifed to go through a bluetooth interface.  It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port.  But we would like to use the Bluetooth VIs in LabVIEW.  I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well.  Do I just uninstall the driver and then try to have Windows install its own driver?  Do you have any other recommendations?
    Thanks,
       Javi

    Hi Javi,
    This sounds like an issue with Windows and your specific Bluetooth devices.  As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers.  Take a look at this link for specific requirements for using Bluetooth with LabVIEW.  Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here.  Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver.  You could check out the Microsoft Knowledgebase for more information.  Thanks and have a great day!    
    Stephen S.
    National Instruments
    1 Test is worth 1000 expert opinions

  • How can you use multiple stream types with one socket?

    Hi,
    I'm working on a large program that currently uses Object Input/Output streams for all of the messaging in a client/server application. This works fine except when files need to be transferred. In many cases using a Object stream to send a file can be 30 times slower than using a Buffered input/output stream. I've found I can combined the two. Here are some code snippets to give you a basic idea of what's happening...
    BufferedInputStream bis = new BufferedInputStream( serverSocket.getInputStream( ) );
    ObjectInputStream ois = new ObjectInputStream( serverSocket.getInputStream( ) );
    //this code runs on a thread on the server
    while( true ){
    switch( whichKindOfStreamUsedNext ){
    case OBJECT_STREAM:
    Object object = ois.readObject( );
    doSomethingWithObject( object );
    break;
    case BUFFERED_STREAM:
    readFromBuffer( bis );
    break;
    Obviously there is a lot missing here. Basically the variable whichKindOfStreamUsedNext is changed in the methods doSomethingWithObject( ) and readFromBuffer depending on what the current state of the server is and what is passed to these methods from the client.
    Here is the problem. If readFromBuffer( ) does a very small task and the client sends an object through an object stream everything is okay. I've switched whichKindOfStreamUsedNext = OBJECT_STREAM before that point and by the time the client sends the object the server is waiting on Object object = ois.readObject( );. However if the method readFromBuffer( ) does a very time intensive task and it takes a while to return and meanwhile the client sends an object then the server never gets that object. Does anyone have an easy solution to this problem. (Changing the whole program to just using BufferedStreams is not a solution).
    Thanks.

    Thanks a lot for the response.
    I guess I didn't realize I could do that.
    I changed how I am doing the program anyways. Sending flags to switch streams was a little messy. but now I have a new problem. I've discovered that mixing object streams with buffered streams also leads to significant speed increases. I do that in this manner...
    int ONE_MEG = 1024*1024;
    ObjectInputStream ois = new ObjectInputStream( new BufferedInputStream( socket.getInputStream( ), ONE_MEG ) );
    and I do the same thing for the ObjectOutputStream. It works very well when I just set up the client's output stream and the servers input stream in this manner. Upload times are increased from 60 seconds to 2-5 seconds.
    Unfortunately when I try to do the same thing with the servers output stream and the clients input stream to speed up downloads I get deadlock! As soon as the socket connection is opened and I try to set up the streams in this manner I get deadlock. Does anyone have any idea why this occurs and what I can do to fix it?

  • My MACbook is connected to my iMAC using thunderbolt. How can I use my wireless keyboard with my MACBook with the lid OPEN?

    It might work with the lid closed but I want to use the both screens. I try to detect the keyboard and the track pac on my Macbook pro but nothing is detected except my iMAC.

    The easiest way is to copy the iTunes folder from your old PC to your MB (put it in the Music folder as a subfolder), along with the other valuable data on the old PC. Or restore it from a backup of your old PC. Then authorize iTunes on the MB to the same account you had on the PC. When you sync it will warn you that your content will be deleted, but it will be replaced with the same content from the MB. Before syncing you should also make sure there is at least one entry in iCal and Address book on the MB (assuming you sync to Outlook or equivalent on the PC) to assure that your contacts and calendar entries will move over correctly.
    Al alternative that is less effective is to connect the iPhone to the MB without syncing, and choose "Transfer Purchases" from the iTunes File menu. This willl copy purchases music, videos and apps, but not ripped tracks from the iPhone to the MB.

  • How can I use a USB keyboard with my Macbook Pro?

    My MBP will not recognize my brand new USB keyboard.
    I have tried the keyboard on two other Macbook Air's and it works perfectly.
    My MBP:
    OS X Yosemite
    10.10.1
    Macbook Pro (Retina, 13-inch, Late 2013)
    2.4 GHz Core i5
    8GB 1600 MHz DDR3
    Mac HD
    Graphics Intel Iris 1536 MB
    Thoughts on how I can resolve this issue would be greatly appreciated.
    Thanks,
    Greg

    Brenden,
    Thanks for the reply.
    I've gone your suggestions in detail and the keyboard is still not working.
    From what I can tell this is a known issue with Yosemite.
    https://discussions.apple.com/thread/5676379
    Someone at Apple must be able to figure this one out.
    Greg

  • How do you use Synergy 7.1 with LabVIEW?

    My company has reciently installed and configured IBM Rational Synergy 7.1 to be used as our Source Code Control tool.  I have installed the appropriate Microsoft Source Code Control Interface so that Synergy will show up in LabVIEW and it does show up in the "Source Control" options window.
    However when I select Synergy as my source control tool it does the following:
    1.  Brings up the login window - I am able to login with no problem
    2.  Brings up a dialog allowing me to select the project to work on, and after I select the project I get two errors...
    one from Synergy: "The workspace/project you want to add to IBM Rational Synergy is not under the work area path 'C:\xxx"
    (where xxx is my work area for the Synergy project I selected)
    then one from LabVIEW:  "Error -2941 occured at prefPage_Source Control.vi     An error occured trying to get the source control project path.    Possible reasons:  LabVIEW:  The source control provider does not support the specified operation."
    I first tried this on an earlier version of Synergy that matched what is being used in:
    http://digital.ni.com/public.nsf/allkb/16D37CCC8659123F8625720500087DB4
    But I was getting pretty much the same errors back then too.  It seems like it should work in LabVIEW, I just have no idea what I am doing wrong!
    Anyone out there successfully using LabVIEW with Synergy????
    Thanks,
    Trevor.

    In theory if a source control provider supports the Microsoft SCC interface, it *should* work with LabVIEW. In practice, each provider has custom implementation that sometimes causes problems when trying to configure the provider from LabVIEW. One sticking point for many providers is the expectation or assumption that an IDE will use some concept of a "project" and therefore pass data associated with that project to the provider. LabVIEW does not enforce that concept but does pass valid information.
    Synergy was tested back when it was a Telelogic product. It was difficult to configure and required exact steps to get it to work correctly. The linked knowledge base were steps taken that worked for a few customer setups. It's possible that on other Synergy setups the exact steps may not work. Also, you might check to make sure you try to configure existing Synergy projects  and not try to create new ones from LabVIEW.
    The error you mentioned seems to imply that some data is not supported by Synergy. I am not sure if Synergy would be able to track down the issue, but I would recommend contacting them to see if they can pinpoint what data LabVIEW is sending is not valid.
    George M
    National Instruments

  • How do you use the P1102W Printer with an Apple iPad?

    How can I print docs. from my iPad to the P1102W? Other printer manufacturers have a printer server app that would use WiFi or is there a way to have the printer as part of the cloud?

    Hi,
    Firstly please check to see if your printer in the list:
    http://support.apple.com/kb/ht4356
    If YES, you can use this to fix/setup:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    If NO you have to print using other apps (if applicable) such as
       http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8
    More info from this:
       http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
      http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
    Regards.
    ps. You also need your printer supports Network connection - Like any vendor, HP even has many more products. You have to buy the right want.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I use my wireless keyboard with my iPad?

    Not sure it can even be done, but I think I saw it being used.

    oh yea...heh heh.  When in doubt, read the instructions!
    Thank you! 

  • How do I use my midi keyboard with iPad?

    I have an Axiom keyboard that requires external power ... Even when I connect the external power chord and then plug it into the ipad using the camera kit, it says that it draws too much power for the ipad ... Is there anything I can do? Thanks!

    http://imageshack.us/photo/my-images/689/ipad2anymidi.jpg/

  • How do you use the MASK tool with 4K footage?

    Hi everyone!
    Normally when I use the mask tool, I drag it onto the footage and four nodes appear on the clip, one in each corner - and then I can move each corner to where I want it...
    I've just shot some 4k footage using a Canon 1d-c and for some reason, when I drag the Mask onto the footage, the four nodes still appear but I can't move them around!
    Does that make sense?
    Any help would be massively appreciated!
    Thanks in advance!

    There shouldn't be any difference in being able to adjust them just because you're using 4K. I can't reproduce the problem and can't think of a reason why it would happen. Hopefully someone else will chime in.
    Russ

  • HT201172 How do you pair Apples wireless keyboard with iPad3

    My iPad3 identifies the Apple Wireless Keyboard but it won't pair.  Have any ideas?

    iPad3 is suppose to be compatable with the Apple Wireless keyboard.

  • How do you use wirelless keyboard with emoji?

    Just downloaded emoji on ipad. Have a wireless keypad! how do you use it?

    I see this:
    Connecting a Music Keyboard to Your Computer
    If you play a keyboard instrument, you can connect a MIDI-compatible music keyboard
    to your computer to play and record Software Instruments.
    To connect a music keyboard to play Software Instruments:
    If the keyboard is a USB MIDI keyboard, connect the USB cable to the keyboard and
    to your computer.
    If the keyboard is a standard MIDI keyboard, connect the keyboard to a MIDI
    interface using standard MIDI cables, and connect the interface to your computer.
    Be sure to follow the instructions that came with the keyboard, which may include
    installing the correct driver on your computer.
    This doesn't tell me what I need to do though. I'm sorry if I sound like a moron, but I can't figure this out haha. I've got everything plugged in and turned on. What is the next step...and the step after that....to make it so that when I play my keyboard, it shows up on Garageband and I'm able to record...

  • How do you use the ATV with the remote when you place it out of sight?

    I placed my ATV behind my tv, though it does not wake up and work with the remote control. How do you use the ATV in this type of situation? Will the Bluetooth keyboard work with it if it is behind the TV?
    Thanks.

    Yes bluetooth and wifi (remote app from your iPhone) are far more likely to work for you.

Maybe you are looking for