How do you use airplay between two iOS devices

I would read http://support.apple.com/kb/ht4437?viewlocale=es_es

Similar Messages

How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
Look at this very informative video for the instructions.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

How do you share information between two iPod Touches?

My girlfriend and I are considering iTouches to replace our old Palm Z22s. We beam a LOT of data between our Palms — grocery lists, contacts, events, notes, tasks, expenses, odometer/milage entries on cars — almost every day.
How does one instantly transfer data between two iTouches?

So there's no easy way to do this? Can't say I'm surprised, the way Apple has become a "my way or the highway" brand.
It's simple: I've added 10 items to my grocery list. She's added 5 items to hers. We're at the grocery store, where I'm about to shop while she runs other errands.
How do I get her shopping list from her iTouch to mine while standing there in front of the store?
With our Palm Z22s, using 10-year-old technology, she can beam me her list in about 2 seconds.
With the iPod Touch, apparently she can't send me her list at all, unless, what? She copies down each item into an email, finds free wifi, sends the email to me, I receive it, then copy the items in the email back into my copy of our shopping list app?
REALLY?!?

How can I use AirPlay from a wireless device while in 'Join a network' mode with an Ethernet client?

I just got the brand new Airport Express (simultaneous dual-band 802.11n) and I'm trying to set it up to join an existing working wireless network that I have in my house, and to drive my home stereo amplifier and have my desktop hooked up via the wired Ethernet port on the Airport Express. Here's how I set it up:
-Wireless mode is 'Join a wireless network'
-Wireless Network Name: <my home network>
--Allow Ethernet clients is checked
-Internet is configured via DHCP (it gets a valid DHCP lease and IP address on my subnet)
-AirPlay is enabled
-The audio out from the Airport Express is connected to my amplifier via an optical digital cable.
If I leave it set up just as described above, I can select the Airport device from iTunes on my MacBook Pro and play music directly to the speakers. Perfect.
The problem comes when I go to plug in my desktop to the wired Ethernet port on the Airport Express. As soon as I plug in the Ethernet, AirPlay stops working on the laptop. Even if iTunes is in the middle of playing a track, the track will stop when the Ethernet cable is plugged in (with a device on the other end). Doesn't matter which of the two Ethernet ports I use. My desktop is able to use the internet while plugged in to the Airport Express, but iTunes on the laptop is no longer able to connect to the Airport Express to use AirPlay.
I've found that if instead of plugging my desktop into the Airport Express's wired ethernet, I plug in the laptop, then iTunes on the laptop is able to use AirPlay -- but then no other devices on the network are able to use AirPlay.
It appears that as soon as I plug in a wired Ethernet device to the Airport Express it only "listens" to AirPlay connections from devices connected to that wired interface. But this is the opposite of what I want. I want it to listen to AirPlay connections from wireless devices connected to the same network as the Airport Express. Is this possible? Is there some hidden setting I have to enable?
Thanks!

Hi Hreb,
I can find nothing wrong with your configuration, but I was curious if there were something illegal about having an Express "join" a wireless network, and still have AirPlay enabled for wireless clients while simultaneously serving as a bridge to a wired one.
To address that uncertainty I implemented your proposed application with the preceding model AirPort Express, and determined it works as you would expect it to: I connected a wired-only PC to the Express, verified that it can connect to the Internet, and streamed Airtunes from a Mac to speakers connected to the Express. I think this is what you want, and it works with no surprises. I was also able to stream Airtunes from the PC connected to the Express as you did, but as you know only one device can stream to the Express at any one time.
I do not have a new simultaneous dual band Express to test though, so all I can conclude is that there may be a bug with the new one that is preventing you from accomplishing this.
Since it is new, I recommend you call Applecare on Monday and explain what you are trying to do. Explain it works with the older Express and you think this ability should remain unchanged with the new dual band model. It is likely they won't be able to help, and at best will offer to exchange it for another one, but if it is a bug as I suspect any replacement dual-band Express will behave the same way.
The important thing is to inform Apple and obtain a case number so that this problem will eventually get the attention of Engineering who might be able to address this with a future update.
Let me know what you find out. Thanks.

Can't use AirDrop between my iOS devices and my MacBook Pro

Help! I can't get Airdrop to work between my MacBook Pro and my iOS devices. I believe all settings are configured correctly but something's off somewhere.
MBP - late December 2011, now running 10.10. Wifi and bluetooth are enabled. Security privacy settings allow Finder inbound connections.
iPhone 5S and iPad Air - both at 8.1. Wifi and bluetooth enabled, AirDrop settings on both are 'contacts only.'
I'm logged in to all three devices with my common iCloud account.
I go to share a photo from my iPhone and only my iPad appears as a potential recipient. Same from sharing from my iPad - only my iPhone appears. On my Mac's Finder AirDrop, nothing appears within, even when both my iOS devices are on.
I've been looking forward to the idea of Mac-to-iOS sharing, and something somewhere is keeping this from happening.
What should I check for next?

For AirDrop between IOS & OS X, you'll need a MBP from 2012 or later.
Your 2011 Mac can only do AirDrop between Macs that support AirDrop.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch, your iOS device needs iOS 7 or later installed and your Mac needs to be a 2012 or later model.

Why can't you use airdrop between all apple devices?!just got the iPad air, and was hoping to have the ability to airdrop images from the mac to the iPad....and you can't do that?! c'mon apple!!Whats going on?!

Is there any way to use Airdrop between Imac and Ipad air?
I cant quite believe thatthe two are not interlinked!!? or am i missing something? i can pick up iphone on the ipad, ipad on the iphone but pick neither up on the imac or the imac on the ipad or iphone. Can anyone shed any light on this?

AirDop on the Mac is a different tech than AirDrop on the iPhone and iPad. At this time, there is no interaction between thew different AirDrops.
It is a little confusing that they are called the same, but are in fact different.
Why Apple did this, I can't say. Maybe in the future it will be possible.

How do you die authorize computers and IOS devices

How do you do I deauthorize iPads and MacBook pros

http://support.apple.com/kb/ht1420
http://support.apple.com/kb/HT4627

How can i use eyedropper between two different art board.

Hi
How can i apply the same color for the images in two different art boards with eyedropper.
I am trying to apply the same color from the image in one art board to another image in another art board.
Can any one help me please. Thanks
Steve
I am using Mac

apresslink,
Presuming you are unable to use the Eyedropper Tool normally, in other words keep the target object selected while you pick up the colour, by having the Artboards open in adjacent windows to ClickDrag between (I am still with 10 which may explain at least part of my ignorance for which I apologize):
Until someone presents a smarter solution, you may cheat and create a carrier object beside the source object, drop the colour in that, cut and paste it to be beside the target object, and drop the colour there. With multiple colours to drop multiple times, you may create a palette to hold them, to use just like a painter working on several canvases at the same time. Or you could paste diminshed copies of the source objects.

Can you use Airdrop between two Macs witch the same Apple ID?

Hi everyone,
you can see my question above. I have a MacBook Pro and an iMac but airdrop doesn`t seem two work between those two. They both use Mountain Lion. Its an iMac late 2012 and the MacBook Pro Retina mid 2012. This means that from a technical standpoint this would have to work but it doesn`t, so I figuered that maybe it is because of the fact that I use the same Apple ID with both of them. Can anyone confirm this or am I doing something wrong?
Thank you in advance!!

It is not necessary that the computers connect through a Wi-Fi router or access point.
The following steps are only to exclude a possible third party device interference.
Turn off Wi-Fi router and or Access Point.
Check that iMac and MBP have their Wi-Fi turned on.
Select Finder, Go, AirDrop, wait a few seconds.
Can you see the other computer inside the AirDrop window?

How do you share music between two user accounts for multimedia purposes???

I am working with iDVD and am running into a slight snafu. My girlfriend has most of the pictures in her iPhoto account, while I have most of the music in my iTunes account. (she works on maintaining our over flowing pictures, while I handle paying for all our music... works out nice. <wink>)
Anyways, we were both working on a new photo DVD for family using iDVD and were frustrated that we could not pull in music from my iTunes account to use with her pictures in iDVD. I am uncertain if we are doing anything wrong and just do not know how to do it, or if it is not possible. We also have a few pictures on my iPhoto account we wanted to add to the DVD, but cannot access those either from her account while in iDVD.
Is it possible to share this data back and forth without making two copies of all of it?
Thanks for all your help!!
- jonathan

Follow the steps after the section that says "If you have an earlier version of Mac OS X", Quintalis. It explains how to do it without the Fast User Switching/iTunes Sharing which is indeed limited only to playback.
Note that when it says "publicly accessible location", it needs to be a place where everyone has read and write access. The most common such place is the Shared folder in the Users folder.

How can you use AirPlay Mirroring to always show one of your open desktop screens?

I have Mountain Lion on a 2011 Mac, and have a number of desktop screens which I use regularly.
My question is, how do I choose only one of those open desktop screens to beam to Apple TV via mirroring? For example, so that I can show a presentation on the projector screen (via Apple TV) and read the slide notes directly from a word document on the Mac screen (which the audience cannot see) or for example, to beam a full screen DVD to my TV so that the family can watch it, whilst I continue to actually work on the Mac on a different desktop screen?
Hope that makes sense...
Thanks
Jonathan

I understand your problem but don't think it's possible:( My only solution is to play my tutorials from the networked drive to my ATV2 while following along with the exercise materials. If you've found a solution please let me know? I thought it'd be possible to assign mirroring to one desktop, like I think you said in the original post, with some type of terminal command but no luck yet. Thanks

How do you share music between two iTunes accounts on one computer?

My wife and I share a Windows 7 laptop computer. We have separate Windows logins and separate iTunes accounts. When we had separate computers we were able to use Home Sharing to share our music but this doesn't work when you have two accounts on the same computer.
Is there a way to share our music libraries without wiping out what is already stored in our individual iTunes music libraries?

Click here and follow the instructions.
(109972)

How can you remove clustering between two BO XI 3.1 Servers

Hi,
Servers A and B have been clustered before and because we have done so many changes to each of the servers, we thought of uninstalling everything from both servers and reinstall BO XI 3.1 server on each.
Installed BO XI 3.1 server on Server A, applied SP2 and this worked fine.
Installed BO XI 3.1 server on Server B, applied SP2 and this worked fine too.
We performed the installation using most of the default settings e.g. port number on both servers (nothing on setting them up as clusters).
However, when we checked the Settings on both CMCs of our BO XI 3.1Servers, there was information under the Cluster Tab as follows and these were on both servers' CMCs:
CMS Name: ServerA.cms (ServerA.ourdomain:6400)
Cluster Name: @ServerB.ourdomain:6400
Cluster Members:
ServerA.cms (ServerA.ourdomain:6400)
ServerB.CentralManagementServer (ServerB.ourdomain:6400)
Question: How can we remove clustering from both servers (we do not want it in the first place and we did not think we set it up when we reinstalled BO XI 3.1 on each).
Hope someone can help us.
Thanks.
Edited by: boxidhf on Apr 14, 2010 8:18 AM
Edited by: boxidhf on Apr 14, 2010 8:19 AM
Edited by: boxidhf on Apr 14, 2010 8:19 AM

This is the high level procedure.
1. STOP SIA on the server to be removed say X.
2. Delete all the servers that belong to X from CMC.
3. Delete the SIA on X and un-install.
There are some key points to watch out for- you can check the admin guide..but at a high level this is the process i have followed in the past.

How Do you pass events between two Different VIs

Hi everyone
I have created this event driven VI.... I now want to drive the events from another VI that doesn't generate events but is static or just plain runs
Thank
dale

Hi Megan
I got your code snippet and I see how you do that. I am new at Lab view and probably am not really getting into the overall architecture if you will. So I have developed this event driven interface tool box that have within the events a section of code. The Tool box is a standalone. I want to use it from a calling SubVI - as you have shown in your first example without making the sections within the event more Sub vi's. Think of it as using the events within the toolbox. The toolbox (SubVi) by itself stays within a loop until the user presses a finish button during standalone. When the toolbox is called by another VI it does not get stuck! It simply returns. I am somewhat spoiled by using VB or C++ just to call the section that gets executed within the class or Sub. Furthermore when I try to make the pieces within the events Sub Vi's I get a large number of inputs and outputs and a bunch of warnings "insane wires" - These are caused by the properties nodes needing to expand once they are placed into the sub vi.
To further complicate things when I use your first example ... I don't register changes only static conditions when only going throught the subV i once.
Sorry for being such a pain
Dale Pittock
Agilent

HT1848 How do you transfer purchases from an iOS device using the new iTunes (11?)?

I've just updated iTunes to ver. 11 on my mothers new PC and I'm connecting her iPad up for the first time. I can't see anything like the transfer purchases option that exsisted in the previous versions. I've tried to eject and start again, but it's still not giving me the option like it used to when you connected a device for the first time.
Any help would be greatly appreciated!

okay, should have serched a little more.. all I had to do was CTRL + b in my library to view the file menu, and under File -> Devices -> transfer purchases
Please ignore this question!

How do you use airplay between two iOS devices

Similar Messages

Maybe you are looking for