How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?
How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver? I have been trying with no such luck.
I want to use 2 computers to talk to each other using the bluetooth VIs. Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth. But for now, I would just like 2 computers to talk and then eventually talk to our own device.
One is a desktop w/ the Belkin F8T012 USB adapter. It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash. It says it cannot install it because it cannot find the necessary hardware. I thought this USB adapter was on the approved Bluetooth devices list? What else should I try? Another Bluetooth USB adapter?
The other computer is a Dell Latitude 820. It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module. On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter). It came with a serial port interface which we modifed to go through a bluetooth interface. It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port. But we would like to use the Bluetooth VIs in LabVIEW. I can't even use the Discover VI. Perhaps it is not using the Microsoft Driver as well. Do I just uninstall the driver and then try to have Windows install its own driver? Do you have any other recommendations?
Thanks,
Javi
Hi Javi,
This sounds like an issue with Windows and your specific Bluetooth devices. As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers. Take a look at this link for specific requirements for using Bluetooth with LabVIEW. Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here. Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver. You could check out the Microsoft Knowledgebase for more information. Thanks and have a great day!
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions
Similar Messages
-
How do you use the MASK tool with 4K footage?
Hi everyone!
Normally when I use the mask tool, I drag it onto the footage and four nodes appear on the clip, one in each corner - and then I can move each corner to where I want it...
I've just shot some 4k footage using a Canon 1d-c and for some reason, when I drag the Mask onto the footage, the four nodes still appear but I can't move them around!
Does that make sense?
Any help would be massively appreciated!
Thanks in advance!There shouldn't be any difference in being able to adjust them just because you're using 4K. I can't reproduce the problem and can't think of a reason why it would happen. Hopefully someone else will chime in.
Russ -
How do you use the P1102W Printer with an Apple iPad?
How can I print docs. from my iPad to the P1102W? Other printer manufacturers have a printer server app that would use WiFi or is there a way to have the printer as part of the cloud?
Hi,
Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix/setup:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
If NO you have to print using other apps (if applicable) such as
http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8
More info from this:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
Regards.
ps. You also need your printer supports Network connection - Like any vendor, HP even has many more products. You have to buy the right want.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How do you use the ATV with the remote when you place it out of sight?
I placed my ATV behind my tv, though it does not wake up and work with the remote control. How do you use the ATV in this type of situation? Will the Bluetooth keyboard work with it if it is behind the TV?
Thanks.Yes bluetooth and wifi (remote app from your iPhone) are far more likely to work for you.
-
How do you use the Multiple Item Information dialog box ???
How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
ThanksAs Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2 -
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
How do you use new ipod nano with itunes 10.6.3?
How do you use new ipod nano with Itunes 10.6.3. I have MBP and it lists itunes 10.6.3 as most current version and won't let me install itunes 11
The seventh generation iPod nano requires at least iTunes 10.7 and Mac OS X 10.6.
(85225) -
How can you use the same e-mail address for multiple ipads?
I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?
And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.
-
can i put Microsoft word onto the ipad, if so how can you save the documents, can i put Microsoft word onto the ipad, if so how can you save the documents
Welcome to Apple Support Communities
If you have Office 365, you can install Office in your iPad > https://itunes.apple.com/us/app/suscriptores-office-mobile/id541164041?mt=8
If you haven't got Office 365, there are other apps that work with Microsoft Word files, like Documents To Go > http://www.dataviz.com/dtg_home.html -
How do you use the wdeploy tool in iPlanet Web Server with Windows 2000 Server?
I found this on the knowledge base, but only described how to use this with Unix. Does this work with Windows? How do you set the IWS_SERVER_HOME environment variable as well? I don't see it in the file.
ThanksHi,
This is pretty common scenario. The best way to achieve this is to split your servers using a collection and deploy a different client settings. You could target your collection using the OS or an OU in AD. There are many option there.
You could also limit the access to the Server collection using Role Based Access to avoid any human "errors" on these collections. Users without rights to these collection just won't see them.
https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
http://blogs.technet.com/b/configmgrteam/archive/2011/09/23/introducing-role-based-administration-in-system-center-2012-configuration-manager.aspx
Benoit Lecours | Blog: System Center Dudes -
How do I use the App store with macbook pro and mac pro
I currently use the app store with the mac book, but want to buy (share?) apps and music with the mac pro.
I can't find anything that specifically outlines how this works.
I use SplashID with the macbook and an iPhone, and want to use it (and sync it) on the mac pro as well.
If you buy apps for a macbook, can you use them on a second machine, or do you need to buy it a second time?Your license from the MAS allows you to download and install the apps on as many Macs as you own or have under your control (institutional or employer supplied Macs.) The Mac should to be running Mac OS X 10.6.8 Snow Leopard or Mac OS X 10.7.2 Lion. Open the MAS app on the Mac Pro and sign into your account to have access to download all of your previous purchases in the Purchased pane.
Simple apps can also be dragged & dropped over a network connection from the MacBook to the Mac Pro. -
How do you sync the wireless keyboard with the Ipad? It doesn't ever find
How do you sync the wireless keyboard to the Ipad
Have you read the iPad manual (Page 22)?
http://manuals.info.apple.com/enUS/iPad_UserGuide.pdf
and the Bluetooth Keyboard manual:
http://manuals.info.apple.com/enUS/Apple_Wireless_Keyboard_2009UG.pdf
If your keyboard is already paired with another device that is in range then you must unpair it first (see page of the keyboard manual). -
UTL_FILE: How do you use the ^ as a delimiter from an ASCII file?
We currently have UTL_FILE pulling in a comma delimited file,
with this code: With the V_COMMA's declared and other variables
declared listed below. It works. When we change the ASCII file
to ^ delimited, the program fails. How do we get the ^ to work
with UTL_FILE?
BEGIN
UTL_FILE.GET_LINE(V_FILEHANDLE, V_NEWLINE);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
/* adding numbers 1-6 to position one on newline*/
V_COMMA_1 := INSTR(V_NEWLINE, ',', 1, 1);
V_COMMA_2 := INSTR(V_NEWLINE, ',', 1, 2);
V_COMMA_3 := INSTR(V_NEWLINE, ',', 1, 3);
V_COMMA_4 := INSTR(V_NEWLINE, ',', 1, 4);
V_COMMA_5 := INSTR(V_NEWLINE, ',', 1, 5);
V_COMMA_6 := INSTR(V_NEWLINE, ',', 1, 6);
V_ITEM_NUMBER := SUBSTR(V_NEWLINE, 1, V_COMMA_1 - 1);
V_AVAILABLE := SUBSTR(V_NEWLINE, V_COMMA_1 + 1, V_COMMA_2 -
V_COMMA_1-1);
V_ETA_CHAR := SUBSTR(V_NEWLINE, V_COMMA_2 + 1,
V_COMMA_3 - V_COMMA_2-1);
V_RETAIL_PRICE := SUBSTR(V_NEWLINE, V_COMMA_3 + 1,
V_COMMA_4 - V_COMMA_3-1);
V_DROP_SHIP_FILE := SUBSTR(V_NEWLINE, V_COMMA_4 + 1,
V_COMMA_5 - V_COMMA_4-1);
V_COMPANY_FILE := SUBSTR(V_NEWLINE, V_COMMA_5 + 1);Thanks for your response!
I have simplified the sheet so it contains no split or merged cells, yet still I get the exclamation mark where I want the average. (The exclamation mark says 'Numbers can't be divided by zero'.)
Exam
Skit
Exam
Class Participation
1
2
TOTAL
MAX. MARK
55
30
100
15
200
ADJ. %
MARK
Student A
37
20
84
15
156
78%
72%
7
Student B
39
28
91
15
173
87%
80%
8
Student C
39
28
86
10
163
82%
76%
8
Student D
34
26
92
15
167
84%
78%
8
Student E
38
26
74
10
148
74%
69%
7
CLASS AVERAGE
37.4
25.6
85.4
13.0
161.4
80.7%
75.0%
I guess the basic question is: can you actually use AVERAGE on data that is output by an IF formula? -
How can I use the QR codes with my iPad 2. do I need to download first an app ?
How can I use the/read the QR codes with my iPad 2 ? Do I need to download an app ?
Yes. There are quite a few available for free in the app store
-
HT3176 How do you use the submit command?
HOw do I use the Apple TV remote to submit after typing?
You can use Runtime.exec to execute other processes from Java. You'll want to read this though:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
Maybe you are looking for
-
External HD Photo library is empty. How to retrieve photos?
SPECS: iMac OSX Yosemite 10.10 IPhoto 9.6 Connected via USB to a Seagate 500GB External HD, Max OS Extended Journaled. Capacity 499gb, available 56.74gb (I also use this time to back up via timemachine) Hello, I'm hoping you can help otherwise my wif
-
Acrobat 9 Pro. S/N not valid
Dear all; I used to have on my old laptop WIN XP 32. "Adobe Acrobat 9 pro." and i have uninstalled this software because I have a new laptop now WIN 7 64. while installing Adobe Acrobat 9 pro, I am receiving an error message that my Serial number is
-
How to uninstall Adobe Edge Code Preview 3 after installing Adobe Edge Code CC
After installing Adobe Edge Code CC via Creative Cloud I have noticed I still have Adobe Edge Code Preview 3 on my machine. There is no specific uninstaller in Applications/Utilities/Adobe Installers So how do I uninstall it?
-
I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?
-
Renaming files with Automator & Apple Spript
Hi there! I need the help of an expert in Automator & Apple Spript.... I've got to rename 500 files with the following names: 001-001 firstfilename.jpg 104-095a otherfilename.jpg Any idea on how to get rid of the second number (that is 3 or 4 charact