How do you use the color channel output mode in Ultra Key in Premiere Pro CS6?

I'm wondering how the color channel output mode is supposed to be used in the Ultra Key inside of Premiere Pro CS6? I've looked through all the Adobe help items and I don't see any documentation on it.

Before I answer, you might want to read the following article: http://www.photoshopessentials.com/essentials/rgb/
So, basically, if you understood all of that, and maybe already knew all of that, then you can use the color channel to see more deeply into the effect by looking at the details of the image through the lens of the color channel.

Similar Messages

  • How do you change the colors of individual cells within a 2D array?

    How do you change the colors of individual cells within a 2D array of numeric indicators?
    I want the VI to check a data value and if it is failing, white out a square at a specific index coordinate.  I have it working with color boxes, but I'm not sure how to use the property node function, to change the color of individual cells, by coordinates.
    I have attached the VI using color boxes. If you run the VI, the box corresponding to the Step control should turn white.
    I want to do the same thing, using numeric indicator boxes inside the array.
    Thanks for any suggestions...
    Attachments:
    Fill DME matrix.vi ‏95 KB

    Get rid of all these sequences! That's just bad form.
    Your code has a few logical problems. Why do you create a boolean array if you later only look at the last element (Yes, the FOR loop does nothing useful, except in the last iteration because your outputs are not indexing. All other iterations are useless, you only get the result of the last array element. My guess is that you want to color the index white if at least one of the numbers is out if range. Right?
    It is an absolute nightmare to manage all your numeric labels. Just read them from a 2D array. Now you can simply find the index of the matched elements and don't have to spend hours editing case structure conditions.
    Attached is a simple example how you would do what I meant (LV7.1). Modify as needed.
    Message Edited by altenbach on 04-04-2006 02:04 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    Fill_2DME_matrixMOD.vi ‏70 KB

  • How do you change the color of a MobileMe calendar group?

    How do you change the color of a MobileMe calendar group?

    Are you using MobileMe? If not, the colors do not match unless you implement the rather painful workaround of loading the calendars one at a time, in the order that the iPhone assigns them (red, orange, blue, green, purple).

  • How do you change the color of the sign and fill text to the color blue

    How do you change the color of the sign and fill text to the color blue in a pdf document

    Is this using the "Fill & Sign" tab of https://cloud.acrobat.com/fillsign (for now text input is only black) or maybe using the Fill & Sign tool in Adobe Reader XI, or another application? 
    Thanks,
    Josh

  • How do you tell the color value of a pixel in an image data

    Hi,
    Given a BufferedImage of type, say BufferedImage.TYPE_4BYTE_ABGR, how do you tell the color value of a pixel in the image?
    Specifically, in the following code:
    Raster imgData = image.getData();
    int x = imgData.getMinX();
    int y = imgData.getMinY();
    int width = imgData.getWidth();
    int height = imgData.getHeight();
    I want to search the raster looking for a specific color, e.g., Color.WHITE.
    According to the API, "getSample()" may be used for this purpose. But, how do you know which color band a band index parameter in getSample() refers to? Does band index of 0 always refer to the RED band? Does band index of 1 refer to the GREEN band? etc.
    I'd greatly appreciate any help you may be able to provide.
    Thanks,
    --HS                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    In the print dialog underneath the settings for number of copies and print range you should see a dropdown menu probably called Layout. If you don't see that look for a button labeled Details and click it.
    Under the Layout menu you should find an option labeled Printer where you will find Printer specific options. Look for something there. You might also find an option called Color which may have options you are looking for.
    If this doesn't help, go to the printer manufacturer's website and look for answers there.

  • How do you use the Multiple Item Information dialog box ???

    How do you use the Multiple Item Information dialog box ???
    Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
    1. The way iTunes sorts tracks and albums
    2. The reason to select a leading check box
    3. Why there are Option selections (Yes /No) and leading check boxes.
    4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
    Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
    Thanks

    As Christopher says, it's a compilation. Different tracks are by different artists.
    Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
    Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
    That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
    If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
    Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
    Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
    tt2

  • How can you use the same e-mail address for multiple ipads?

    I have two iPads.. an iPad and an ipad 2.  I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use.  how can you use the same e-mail address for multiple ipads?

    And by using the same Apple ID you can also share purchases.  If you have a different Apple ID for each iPhone then you can't share purchases.

  • How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

    How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver?  I have been trying with no such luck.
       I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth.  But for now, I would just like 2 computers to talk and then eventually talk to our own device. 
    One is a desktop w/ the Belkin F8T012 USB adapter.  It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash.  It says it cannot install it because it cannot find the necessary hardware.  I thought this USB adapter was on the approved Bluetooth devices list?  What else should I try?  Another Bluetooth USB adapter? 
    The other computer is a Dell Latitude 820.  It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module.  On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter).  It came with a serial port interface which we modifed to go through a bluetooth interface.  It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port.  But we would like to use the Bluetooth VIs in LabVIEW.  I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well.  Do I just uninstall the driver and then try to have Windows install its own driver?  Do you have any other recommendations?
    Thanks,
       Javi

    Hi Javi,
    This sounds like an issue with Windows and your specific Bluetooth devices.  As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers.  Take a look at this link for specific requirements for using Bluetooth with LabVIEW.  Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here.  Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver.  You could check out the Microsoft Knowledgebase for more information.  Thanks and have a great day!    
    Stephen S.
    National Instruments
    1 Test is worth 1000 expert opinions

  • How do you use the ATV with the remote when you place it out of sight?

    I placed my ATV behind my tv, though it does not wake up and work with the remote control. How do you use the ATV in this type of situation? Will the Bluetooth keyboard work with it if it is behind the TV?
    Thanks.

    Yes bluetooth and wifi (remote app from your iPhone) are far more likely to work for you.

  • How do you change the color of events on ICal.

    How do you changed the color of events on ICal? I was able to do this when I utilized ICal on the Snow Leopard system but can no longer do this with Lion.
    I know that I can select the Calanders list, but when I create a new "Calander" it doesn't allow me to choose a color and it doesn't show up in my list when working within an event.
    Thanks!

    Phoebe,
    Right-click on the new calendar and select "Get Info."
    Make sure that the ✓ mark is selected.
    Then choose the color from this pane:

  • How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

    How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

    Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

  • With IOS 7.0 How do you change the Color Red, that shows up on the Calendar to another color? People with certain eye problems cannot tolerate the color Red.

    How do you change the Color Red, that shows up on various points of the Calendar to another color? Persons with certain eye problems have visual irritations that can be caused by the color Red. This problem came up with the update to IOS 7.0.

    Sorry but you cant

  • How do you change the color of the appointments that show up in Calendar?

    How do you change the color of the scheduled appointments in calendar? All of mine seem to show up in red when they are actually in blue on my computer.

    Many others are experiencing this problem as well.. I personally have eleven different calender in iCal with assigned colors, all of which are different colors on my iPhone iCal.
    It seems that as of now there is no fix for this bug and that we'll just have to wait for Apple to recognize the issue.

  • How do you change the color of the title text?

    The main title text for the tap your currently on shows up centered one line above the tab row. The default is black text, with a gray drop shadow, but that doesn't work with dark background themes/personas. How do I go about changing that text color so that its visible on a dark background. I've tried changing font stylings in general for the browser, and I've tried changing the color values in the about:config for the persona, but none of that works. How do you change the color of the title text?

    That colors option under content doesn't change the color of the title text, but thanks anyways

  • How do you change the color of the texting bubbles

    Help how do you change the color of the texting bubbles

    You don't.
    iPhone User Guide (For iOS 5.0 Software)

Maybe you are looking for