How do you use the MASK tool with 4K footage?

Hi everyone!
Normally when I use the mask tool, I drag it onto the footage and four nodes appear on the clip, one in each corner - and then I can move each corner to where I want it...
I've just shot some 4k footage using a Canon 1d-c and for some reason, when I drag the Mask onto the footage, the four nodes still appear but I can't move them around!
Does that make sense?
Any help would be massively appreciated!
Thanks in advance!

There shouldn't be any difference in being able to adjust them just because you're using 4K. I can't reproduce the problem and can't think of a reason why it would happen. Hopefully someone else will chime in.
Russ

Similar Messages

  • How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

    How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver?  I have been trying with no such luck.
       I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth.  But for now, I would just like 2 computers to talk and then eventually talk to our own device. 
    One is a desktop w/ the Belkin F8T012 USB adapter.  It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash.  It says it cannot install it because it cannot find the necessary hardware.  I thought this USB adapter was on the approved Bluetooth devices list?  What else should I try?  Another Bluetooth USB adapter? 
    The other computer is a Dell Latitude 820.  It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module.  On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter).  It came with a serial port interface which we modifed to go through a bluetooth interface.  It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port.  But we would like to use the Bluetooth VIs in LabVIEW.  I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well.  Do I just uninstall the driver and then try to have Windows install its own driver?  Do you have any other recommendations?
    Thanks,
       Javi

    Hi Javi,
    This sounds like an issue with Windows and your specific Bluetooth devices.  As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers.  Take a look at this link for specific requirements for using Bluetooth with LabVIEW.  Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here.  Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver.  You could check out the Microsoft Knowledgebase for more information.  Thanks and have a great day!    
    Stephen S.
    National Instruments
    1 Test is worth 1000 expert opinions

  • How do you use the wdeploy tool in iPlanet Web Server with Windows 2000 Server?

    I found this on the knowledge base, but only described how to use this with Unix. Does this work with Windows? How do you set the IWS_SERVER_HOME environment variable as well? I don't see it in the file.
    Thanks

    Hi,
    This is pretty common scenario. The best way to achieve this is to split your servers using a collection and deploy a different client settings. You could target your collection using the OS or an OU in AD. There are many option there.
    You could also limit the access to the Server collection using Role Based Access to avoid any human "errors" on these collections. Users without rights to these collection just won't see them.
    https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
    http://blogs.technet.com/b/configmgrteam/archive/2011/09/23/introducing-role-based-administration-in-system-center-2012-configuration-manager.aspx
    Benoit Lecours | Blog: System Center Dudes

  • How do you use the P1102W Printer with an Apple iPad?

    How can I print docs. from my iPad to the P1102W? Other printer manufacturers have a printer server app that would use WiFi or is there a way to have the printer as part of the cloud?

    Hi,
    Firstly please check to see if your printer in the list:
    http://support.apple.com/kb/ht4356
    If YES, you can use this to fix/setup:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    If NO you have to print using other apps (if applicable) such as
       http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8
    More info from this:
       http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
      http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
    Regards.
    ps. You also need your printer supports Network connection - Like any vendor, HP even has many more products. You have to buy the right want.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do you use the ATV with the remote when you place it out of sight?

    I placed my ATV behind my tv, though it does not wake up and work with the remote control. How do you use the ATV in this type of situation? Will the Bluetooth keyboard work with it if it is behind the TV?
    Thanks.

    Yes bluetooth and wifi (remote app from your iPhone) are far more likely to work for you.

  • Using the mask tool.. need help

    The StudentFilmmakers magazine has an Adobe forum with an After Effects section and we have a few questions that need answers. Here is a link to one and below is the question.
    http://www.studentfilmmakers.com/bb/showthread.php?t=4830
    "Hey! I'm experiencing After fx for the first time.... and I wonder how I use the mask tool to remove something in a movie clip.
    I have a clip with a boy jumping on a trampoline....then I want to cut out the background and insert a mountain cliff so it seems that he falls from the cliff.....
    How ?? "
    We love Adobe products and we feature film and video makers from out networking section each issue. We very much apreciaete help from professionals or knowlegable people. You are welcome to put your links in your signature and we do reward our posters and feature networkers in the magazine.

    Better answer??
    - Place the movie in the timeline creating a new composition of the size of your footage or drag it onto the "create new Comp" icon.
    - interpret your footage properly
    - use the pen tool and start to draw a mask around your jumping trampoline guy at the very first frame of your timeline
    - open the mask properties of your movie layer and click the stopwatch icon to create a keyframe for the mask shape properties
    - now move one frame forward in the timeline and readjust the mask - keyframes will be added automatically for you
    - if done, move next frame in timeline and readjust your mask
    - if done, move next frame in timeline and readjust your mask
    - if done, move next frame in timeline and readjust your mask
    - if done, move next frame in timeline and readjust your mask
    - if done, move next frame in timeline and readjust your mask
    - if done, move next frame in timeline and readjust your mask
    - ... if done with all, click the "show transparency" button of your comp window. place your mountain underneath the masked movie and you're done.
    this is called rotoscoping and makes a lot of fun.
    if your actor was shot in front of a green screen or a blue box, you could use the Ae keying plugs and make this process a lot easier, of course i would not recommend a desk lamp for lighting your scene and not a $ 100,- videocamera from Wal Mart.
    better answer?

  • How can I use the versionning tool to make a coherent solution to export

    how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
    I want to know proper steps to Import/export objects.
    while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
    while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
    required ur suggestion
    Palash Chatterjee

    kelly-bot wrote:
    Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
    Our posts overlapped there.  Are you saying you could reliably drag one pixel with CS3? 
    What other issues are you having?  Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

  • How do you start the Brush tool from a last anchor point?

    Hi there,
    I'm somewhat almost a complete newb to Illustrator, and would really appreciate some help!
    Is there any possible way to continue a brush stroke from your last brush stroke's end point (the anchor point)? For instance, if I drew half of a circle with one brush stroke, and wanted to cleanly complete the circle by having the next brush stroke start from the point where I last finished, how would I do that?
    Any help much appreciated! Thanks!

    What tool did you use to draw? Since you said brushstroke will assume you used the paintbrush tool.
    Double click on paintbrush tool for the options. Change your settings to mine, especially the bottom 2 checkmarks.

  • How do you use the Multiple Item Information dialog box ???

    How do you use the Multiple Item Information dialog box ???
    Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
    1. The way iTunes sorts tracks and albums
    2. The reason to select a leading check box
    3. Why there are Option selections (Yes /No) and leading check boxes.
    4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
    Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
    Thanks

    As Christopher says, it's a compilation. Different tracks are by different artists.
    Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
    Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
    That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
    If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
    Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
    Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
    tt2

  • I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • How do you use new ipod nano with itunes 10.6.3?

    How do you use new ipod nano with Itunes 10.6.3.  I have MBP and it lists itunes 10.6.3 as most current version and won't let me install itunes 11

    The seventh generation iPod nano requires at least iTunes 10.7 and Mac OS X 10.6.
    (85225)

  • How can you use the same e-mail address for multiple ipads?

    I have two iPads.. an iPad and an ipad 2.  I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use.  how can you use the same e-mail address for multiple ipads?

    And by using the same Apple ID you can also share purchases.  If you have a different Apple ID for each iPhone then you can't share purchases.

  • How do I send a 2-10 MHz pulse train to my DAQ 6052E why simultaneously reading in data? I'm using the NIDAQ Tools with Igor Pro.

    I need to send a continuous 2-10MHz TTL timing signal to a low pass filter (to set the cutoff frequency) while I collect data from one of the analog inputs. I'm hoping that I can send the TTL signal and collect the data through the same DAQ 6052E board.
    I've been told that I can send a pulse train using one of the two counters on the board. But does anyone have more specific advice how to implement this using the NIDAQ Tools extensions to IGOR Pro? In particular I'm concerned about how I can send a continuous TTL signal and simultaneously read data. Or can you just turn on the timing signal and it stays on until it's
    turned off again?
    Thanks for your help

    You can program one of the counters to generate a continuous pulse train. Once programmed to do so the counter needs no further interaction. It will continue to generate the signal until stopped through SW. So you can start the counter using the functions provided to you, then forget about it and program the AI operations.
    Christian Loew, CLA
    Principal Systems Engineer, National Instruments
    Please tip your answer providers with kudos.
    Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
    or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
    to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

  • How do I use the brush tool on a video in cs6? It only stays on one frame?

    How do I get what I create with the brush tool to stay on every frame in my video? I've got some footage of a car trip and I'm trying to use the brush tool to make a super 8 looking border, but it vanishes when I play the video because its only on one frame.

    When Photoshop just won't work properly, try replacing the Preferences file by using this procedure:
    Open Photoshop and save your custom goodies. Choose Edit→Presets→Preset Manager to save sets of styles, brushes, and other such bits and pieces you created. Use the Save Actions command in the Actions palette menu to save any sets of custom Actions.
    Review your Preferences. Open Photoshop's Preferences and go through each pane, noting your preferred settings so that you can restore your work environment later.
    Quit Photoshop. You can close the program like this:
    On a Mac: Hold down Command+Shift+Option and restart Photoshop. When prompted, release the modifier keys and confirm, that yes, you do want to replace the Photoshop settings.
    On a PC: Restart Photoshop; immediately press and hold down Ctrl+Shift+Alt. When prompted, release the modifier keys and confirm, that yes, you do want to replace the Photoshop settings.

  • How can I use the move tool to drag ONE pixel at a time?

    The move tool is stuck to snapping at ~20 pixels at a time, so when I try to move a layer by a few pixels, its super frustrating. I dont want to have to use the arrow keys, I should be able to drag wherever I want.
    How can I stop the move tool from snapping? I want to drag things precisely. I am zoomed at 100% if that makes a difference. I cant find anything about this under Preferences.

    kelly-bot wrote:
    Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
    Our posts overlapped there.  Are you saying you could reliably drag one pixel with CS3? 
    What other issues are you having?  Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

Maybe you are looking for