How do you vary a parameter at a given frequency?

i'd like have parameters in FCP vary at a given frequency, following the beat of the music. i assume i would need to open filter in Motion but how do i modify an external parameter that then lets me assign a frequency and intensity range within FCP once it has been added to the clip?
thanks so much.

thanks so much, Simon. actually i do not know all that much about Motion, just getting started. so i cannot make audio behaviors one of those "external controls" you can bring into FCP i take it. what about just having a video parameter made external to vary the frequency of say total effect coming on and off or some other parameter? i can then estimate the frequecy of the beats and input that? is that possible, i guess i would use video behaviors to set this up?? thanks for your help. if interested, here is one of the experimental videos i am making i would have loved to sync the flashes to the bass beat:
http://www.youtube.com/watch?v=u1H4bUZf1XE&feature=em-uploademail
domenic

Similar Messages

How do you vary the Date/Time stamp format in File Adapters

In the receiver channel of the File Adapter where you specify the 'File Name Scheme', you do have the option of specifying a 'File Construction Mode' of 'Add Time Stamp'. How can you specify a different Date/Time stamp format ( eg MM/DD/YY vs YYYYMMDD vs MMDDYY, etc. ) without changing the Date/Time stamp for the entire SAP system? Also, can you control where the Date/Time stamp appears in the filename?

Hi,
There are many threads discussing the same issue. Go thro the following:
Dynamic file name (Date) in Receiver File Adapter
Receiver File Adapter - TimeStamp
Bhavesh's reply in above thread:
You can use Adapter Specific Identifiers and then change the file name in the mapping. Append the tiem stamp in the format that you want and so on.
Just use this code in an UDF,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String SourceFileName = conf.get(key);
java.text.SimpleDateFormat dateformat = new java.text.SimpleDateFormat( "yyyyMMdd" );
dateformat.format( new java.util.Date() );
String newfilename=SourceFileName+dateformat;
// change to new file name
conf.put(key, newfilename);
return "";
Regards,
P.Venkat

How do you set repeat events for a given day of the week

How do you set a repeat event in calender for a given day of the month. Expample 3rd Wednesday each month?

Have you read the app store guidelines yet?
App Store Review Guidelines:
http://developer.apple.com/appstore/resources/approval/guidelines.html
Don't go on what you've seen in the store - for every example you spot, there are hundreds that didn't make it in.
As well, Apple is tightening up on reviews, etc.
Loads of discussion on this in the iOS Dev Forums, BTW

How do you display a parameter form built from a report?

Does anyone know how to display the parameter form from building a customized report, as a portlet on a page? Everytime I try, I get the report, which will return no records because it does not first ask for the query parameters.
thanks!
null

You don;t select Run to Run the report with
parameters - you select the Customize option.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sarah Lo ([email protected]):
Does anyone know how to display the parameter form from building a customized report, as a portlet on a page? Everytime I try, I get the report, which will return no records because it does not first ask for the query parameters.
thanks!<HR></BLOCKQUOTE>
null

How do you set a parameter value in a jnlp file?

I am trying to figure out how to assign a value to a parameter within a jnlp file and then call that into the main class file. My main class file is below. I want to set firstName inside of the JNLP config file, but am convinced it is impossible. Any thoughts?
public class Greeting
private String firstName;
public Greeting()
public String getName ()
if( firstName == null)
firstName = "Day";
return firstName;
}//end method
public static void main (String args[])
Greeting greeting1 = new Greeting ();
greeting1.getName();
System.out.printf("%s\n", greeting1.getName());
}

In the jnlp file, add the Name as a runtime argument for running the Greeting class from its main(). Then add a constructor like
public Greeting(string name){
firstName = name;
}and then change the Greeting greeting1 = new Greeting ();to Greeting greeting1 = new Greeting (args[0]);A side note, most people on here get all bent out of shape if you don't put your code in the Code formatter on here, in case you didn't know about it before. It's just easier to read.

How can you hide the parameter in Crystal XI

I have three parameters but I would like to hide the 3rd. How should I do that?
ST

It is not possible to hide parameters in crystal XI. Once it is created you should enter all the parameters in order to run the report. In CR2008 you have a new option optional parameters in which you can run the report without entering any parameter value but here also you cannot hide the parameters but you can run the report without entering parameter values.
Regards,
Raghavendra

LinkToAction how to use it with parameter?

Hello,
searching for tutorials about the use of the LinkToAction I have seen that here is a possiblity in WD4J to use a context-node.
How can you pass a parameter in WD4A? (I am using a rowrepeater for a list of books and would like to pass the bookID to the event)
How can I do this?
Thanks a lot,
Vanessa

Thanks for your answer Lekha,
unfortunaltely I don't get the point.
>
Lekha wrote:
> From this action if you want to export the bookid then it should be a exporting parameter..
>
> you can specify this way...
Somehow I don't get the point. How can I pass the bookid to the method?
I have a rowrepeater. One of the elements is the link to the action. I will add the bookid as parameter. That is clear.
My problem is how to connect the bookid of the row that is displayed to the method? Is it just because of the name? I don't see any context I can associate?
Could you please go a little bit more in detail,
Vanessa

How do you change the backup assiatnt pin number??

How do you change teh pin that was given automatically.? Like to use somethign that I will remember

It's always helpful to utilize a PIN that will easily be remembered by you.
I would be better able to assist you if I knew which phone you have.
If you have a basic phone you can
Change your PIN - Access Backup Assistant on your handset:
select Options
select Change PIN
enter the PIN shown on the right in the enter
old PIN field
click Next then enter your new PIN
click next
click OK to complete the PIN change.
If you have a smart phone, I would recommend visiting the Verizon Support web page. Once you are there, type
change backup assistant pin (along with the phone you have)
(i.e change backup assistant pin Droid X)
Once you have done that, you will get step-by-step instructions on how to change your PIN via your phone.

How do you make report selection variant the default selection varaint?

Hello all,
I know how to create a Selection Variant for reoprts and I know how to create a User Variable that defaullts field values for a specific user. But can anyone tell me how do you have a specific Report Selection Variant Default for everyone? I know this one is probably staring right at me but I'm not seeing it. Your help would be greatly apreciated.
Thanks,
Dan

Bhatia,
That will only hold the data for that specific user. You can also do that via "user variables". What I would like to know is how do you get it to be the default for All users.
I am investigating the possibility of using t-code SE38 and changing the Values on the existing variants to contain the default data we'd like to see. I'd much rather create just one Variant per report and have that be the default variant.
Anyone have any ideas?
Thanks,
Dan
Edited by: Daniel Goodhart1 on Oct 7, 2009 11:03 PM

Can you please tell me how can i change the parameter of Applet using Aspec

Respect Members
Can we apply Aspectwerkz on Applet? In our project we have to
change the method parameters before its execution(Around Advice) , can we do this in applet using Aspectwerkz?
Can you please tell me how can i change the parameter of Applet using Aspectwerkz or AspectJ ?
I did it by for Java Application using the AspectJ And Aspectwerkz But not able to do for Applet.
For Applet I Am setting the parameter in JAVA plug in for Aspectwerkz e.g. -Xdebug -Xrunaspectwerkz -Xbootclasspath & path for xml file in which pointcut is defined.
If you any Friend working on it or any author who might be helpfull for me please Forward this mail to him/her
THANKs in Advance
[email protected]

hello rodale, what you're seeing is probably a side effect of firefox not being able to save certain preferences into its profile folder.
go to ''firefox > help > troubleshooting information'', click on ''profile folder/show folder'' and close all firefox windows afterwards. a windows explorer window should open up - in there delete the file named '''user.js'''.
in case this didn't solve the issue yet please also refer to [[How to fix preferences that won't save]].

EL - How do you call a method that requires a parameter

How do you call a method that requires a parameter
In scriplet code here is what I am trying to do
<%= car.getDefaultColor(car.getCarType()) %>
How do I do this in EL
Here is my guess (it generates the Exception described below)
${car.defaultColor(car.carType)}
Here is the Exception I am getting:
javax.servlet.ServletException: <h3>Validation error messages from tag library c</h3>tag = 'out' / attribute = 'value': An error occurred while parsing custom action attribute "value" with value "${car.defaultColor(car.carType)}": Encountered "(", expected one of ["}", ".", ">", "gt", "<", "lt", "==", "eq", "<=", "le", ">=", "ge", "!=", "ne", "[", "+", "-", "*", "/", "div", "%", "mod", "and", "&&", "or", "||"]
Any Ideas?
P.S. If it matters to you, I am using JSTL 1.0 and the code snippets above are actually within the value attribute of a <c:out value="" /> statement.

How do you call a method that requires a parameter
In scriplet code here is what I am trying to do
<%= car.getDefaultColor(car.getCarType()) %>
How do I do this in ELYou don't. EL is very strict in method signatures. All get methods must be public Type getProperty(void); And all set methods must be public void setProperty(Type t);
So you will have to re-work your Bean so it does not need an argument to the get method (getDefaultColor()). Since you are calling another method out of car, you might re-write the getDefaultColor method as such:
public Object getDefaultColor() {
    CarType ct = this.getCarType();
    //then do other stuff
}If that isn't suitable, then provide a helper method that is used to set the current car type and then call the getDefaultColor:
private CarType curCarType;
public void setCurrentCarType(CarType ct) { curCarType = ct; }
public Object getDefaultColor() {
    if (curCarType == null) throw new IllegalStateException("CarType must be set before getting color");
    //normal work using curCarType
<c:set target="${car}" property="currentCarType" value="${car.carType}"/>
<c:out value="${car.defaultColor}"/>It is better to do as little of the data manipulation (setting up the car type) in the JSP as possible, so the first option is better than the second. Also better then the second would be to set the current car type in a servlet or data access object (or wherever) from which your retreive the car to begin with. Manipulatig it in the JSP itself should be your last resort (to keep as much business logic out of the JSP as possible).
Here is my guess (it generates the Exception
described below)
${car.defaultColor(car.carType)}
Here is the Exception I am getting:
javax.servlet.ServletException: <h3>Validation error
messages from tag library c</h3>tag = 'out' /
attribute = 'value': An error occurred while parsing
custom action attribute "value" with value
"${car.defaultColor(car.carType)}": Encountered "(",
expected one of ["}", ".", ">", "gt", "<", "lt",
"==", "eq", "<=", "le", ">=", "ge", "!=", "ne", "[",
"+", "-", "*", "/", "div", "%", "mod", "and", "&&",
"or", "||"]
Any Ideas?
P.S. If it matters to you, I am using JSTL 1.0 and
the code snippets above are actually within the value
attribute of a <c:out value="" /> statement.

How to create variant for selection screen which is in subscreen

Hi,
How to create variant for selection screen which is in subscreen in a module pool program?
it is very urgent.
Thanks in advance.

Hi,
You can create the 'Parameter Transaction' so that whenever you run the particular transaction it will run with the initial value given when the Tcode was created and hence you can skip the initial screen of the module pool program.
To create Parameter transaction from SE93 you have to choose the last option i.e Parameter Transaction.
Regards
Sudheer

How can you automate the monthly opening of MM periods

How can you automate the monthly opening of MM periods ????????????

RMMMPERI accepts a period/year or a date.
If you enter a date the period is derived by it.
1. create a variant and check the attribute 'selection variable' for the parameter date. Then click the button 'Selection variables' and set the current date. Every time this variant is used the parameter DATE is filled with the current date.
2. create a job for RMMMPERI with the variant created in the preceding step. Set it as periodic.
If you're not using a fiscal year variant simply schedule it as monthly (to be executed the first day of the month).
If you are using a fiscal year variant you'd have to define a calendar with only the first day of each period defined as working
day and use it in the periodicity restrictions.
Another possibility:
Write a very simple ABAP which run daily to check if the period has changed and submit RMMMPERI.
Regards
Chander

I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

How to set different view parameter programmatically in the same task flow

Hello everyone,
I have a view activity A that calls another view activity B with a link. In this link the action is set to a method (I use JSFUtils class: http://jdeveloper-adf.googlecode.com/svn/trunk/TGPrototype2/ViewController/src/com/tgslc/defaultManagement/utils/JSFUtils.java):
public String goToB() {
String paramToPass = "someParameterTakenInSomeWay";
JSFUtils.setExpressionValue("#{pathToViewB_pageBPageDef.paramName}",paramToPass);
return "openActivityB";
where openActivityB is the control flow case to call B.
In the B pageDef file I have set a parameter "paramName" without any value:
<?xml version="1.0" encoding="UTF-8" ?>
<pageDefinition xmlns="http://xmlns.oracle.com/adfm/uimodel"
version="11.1.1.59.23" id="pageBPageDef">
<parameters>
<parameter id="paramName"
value=""/>
</parameters>
<executables/>
<bindings/>
</pageDefinition>
But at running time I have a oracle.jbo.expr.JIEvalException:
JBO-25077: Name paramName not found in the specified object: pathToViewB_pageBPageDef.
The question is: how can I set the parameter programmatically from the view activity A?
Note that I use this method to set the parameter because in the real application I have many "view activity A" that will call B, but all of these have to set this parameter.
I use JDeveloper 11.1.1.4.
Thanks in advance,
Baduel

Hi,
this is because PageDef B represents a binding container that is not active to the time you try to call it. The binding container becomes available when navigating to the page but not before. Instead:
1. define a managed bean in pageFlowScope and expose a setter/getter method to hold the value to pass on
2. Reference the managed bean in pageFlowScope from the attributebinding NDValue property using EL
3. Set the managed bean value before navigating to view B
Frank

How do you vary a parameter at a given frequency?

Similar Messages

Maybe you are looking for