How Do You Verify an External Firewire Drive?

Hi. How do you use Disk Utility or the Terminal to verify the condition of an external firewire drive (which I use as Time Machine) that is not Time Capsule? Is there a program for it on Boot Camp Windows? Thank you in advance.
Gbu

Open disk utility and click on the drive the click verify.

Similar Messages

  • HT201250 How do you add an external Hard drive to time machine and share on network?

    How do you add an external Hard drive to time capsule and share it on local network?
    Lee

    Ensure it's formatted as Mac OS Extended, FAT16, or FAT32, connect it to a self-powered hub, and plug it into the Time Capsule's USB port. If the drive is Ethernet and not USB, ignore everything else and just plug it in.
    (71787)

  • How to reestablish connection to external FireWire drive with iTunesLibrary

    Hello all. Here's the scenario I would like help with, please:
    I currently have a G5 Dual 2.0 GHz PowerMac running Leopard 10.5.1 and iTunes 7.6 . I have my iTunes library of tunes on an external FireWire Drive. I expect to purchase a Mac Pro soon. I expect to use Migration Assistant to pull files from my G5 over to the Mac Pro. Good so far.
    Everything I've read about having ones iTunes songs on an external drive always starts with the assumption that the iTunes songs are currently on ones internal drive. In my case, as you can see, that is not the case. Given that I already have my songs on an external drive, that I'll have a new computer with things in their default positions (unless Migration Asst. pulls over my iTunes preferences including iTunes songs location), how, then, can I make sure the new iTunes app on the new Mac Pro "sees" where my music already exists?
    Thanks for any help you might give. I'd like to be able to get iTunes working properly from day one on the new Mac Pro without iTunes problems.
    Wayne

    Thank you Airsculpture. What you laid out is the exact procedure I have used in the past. For some reason I thought switching to a new OS on a new computer might complicate things further. Glad to see that is not the case.
    I appreciate your help!
    Regards,
    PWRMAC

  • How do you dump a external hard drive from PC to mac

    How do i dump my external hard drive from a PC to my Mac

    If you don't see the external HD when you connect it to the Mac, then you need to use Disk Utility to format the XHD to a FAT32 drive. Once done it will read on the Mac and PC without any problems.

  • How to install tiger on external firewire drive

    I'd like to upgrade my dual 2GHz Power PC G5 to 10.5, but I need access to OS9 from time to time. To solve this I wanted to install 10.4 with OS9 on my external HDD. I partitioned my Western Digital drive (connected by FW800) and installed 10.4 from the install disk. However, when I select it as the startup disk, the startup fails to identify the disk and starts from the internal drive.
    I tried to follow instructions from an old post, but one thing that was different was that when partitioning my harddrive, I did not have the option for GUID, I just had the option for Apple Partion Map. Oddly, now that I installed OSX 10.4, the option for GUID appears, but still seams incorrect since I'm on a G5 CPU.
    Any ideas why I can't boot from the external drive? Any suggestions on how to install OS9 and migrate my user folders over when I get it working?
    Thanks,
    Marcus

    Many Western Digital firewire drives will not boot a PPC mac. From this WD support page:
    http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1787
    The following external hard drives are not bootable on Power PC based Macintosh computers systems through USB/FireWire 1394(a/b):
    * My Book Essential Edition
    * My Book Essential Edition 2.0
    * My Book Home Edition
    * My Book Mirror Edition
    * My Book Office Edition
    * My Book Premium Edition II
    * My Book Pro Edition II
    * My Book Studio Edition
    * My Book Studio Edition II
    * My Passport Studio
    * My Passport Elite
    * My Passport Essential
    * WD Passport
    * WD Passport (Silver)
    If your drive is new and on the list, I would try to return it and get a different brand.

  • HT3275 How do you Format the external hard drive been used for time machine?

    Error reads "Not enough space on the external hard drive" How do i format the memory and start again?
    Thanks Geremy

    ON an external hard drive.. that is easy.. just open disk utility and reformat it. Make sure you use Mac Extended Journeled. (HFS+)

  • How do I Daisy Chain external Firewire drives

    Sorry if this seems a dumb question but.....
    I want to add another External Hard Drive as my current one is starting to get full, I'm using a Western Digital FireWire 800 currently and I believe that I can add another External FireWire 800 drive by daisy chaining it with the existing drive using a FW800 connector. Is this correct?
    Will it just appear on the desktop as another drive to which I can save files etc or do I have to do anything else?
    Once again sorry if this sounds like a dumb question but I just want to make sure I don't do anything that will cause me problems later down the line.

    Yes, as long as drive 1 has two sockets, just plug drive 2 into drive 1 and drive 1 into the computer and it all works seamlessly; both appear on the desktop just as if they were plugged into separate sockets. Of course drive 1 must be powered, or drive 2 won't appear.

  • How do you erase an external hard drive which will not show up on your computer?

    I bought a LaCie porsche design 2TB external hard drive  from the Apple Store to use with time machine on my MAC 2 months ago. It will no longer show up on my desktopn. After speaking with LaCie, they sent me a replacement. However, I have to send the brooken one back to them and since we could not erase it or anything on my Mac is there anyway to erase the hard drive before sending it back to them with all my information on there?
    Message was edited by: carolsh

    I know. But after Yahoo, Target , Neimans and others. But I agree. They even sent me a more expensive replacement as they did not have my model in stock and is backordered. So, a win win situation. I was impressed that the tech person spent about an hour on the phone with me trying a variety of options. At first, they were going to charge me shipping- but then she changed her mind and shipped the replacement 1 day fed ex. I guess that is why I always buy LaCie vs others. My older LaCie which I still had but was smaller- I plugged in and did a back-up and I had just enough room on it so I have that for safe keepings now as well.
    Thanks again for your pleasant response. I guess I need to limit my profile to "registered members" only. I hope Apple monitors these discussions and people's responses periodically.

  • How do you share a external hard drive between 2 computers

    I have been trying to access my external hard drives that are hooked up to my mac mini from my imac and cant seem to do it. They are listed in the shared folder on the mac mini already.

    Select the folders of files and Finder> Get Info and at the bottom change the permissions to everyone read and write.
    then click the spoky thing and "apply to enclosed items"
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • How do you format an External Hard Drive

    I'm New to Mac. I have a Mac Book Pro Intel. I need to format an old PC hard drive so it works as an external drive. I have it in a enclosure and connected by firewire. The Mac reads it but can not write to it. Plus I don't even know if you format like I did in windows PC.
    Mac Book Pro   Mac OS X (10.4.8)  

    Hey,
    Here is a great way on how to format your drive for Mac. You would need to choose the MS-DOS format.
    To do this:
    1. Go to Disk Utility
    2. Find Your External HD on the left hand side and click on it
    3. Go to the Erase panel
    4. Choose the Volume Format as MS-DOS File System
    5. Name the Drive if you wish
    6. Erase
    For a more graphical representation follow the link below:
    Formatting an External HD (Note: In this case where it says "Mac OS Extended (Journaled) or Mac OS Extended" you would pick the MS-DOS option instead.)
    This allows you to use your dirve with both OS's and having the option of writing and reading for both. If you have any important documents or things on your HD I would just copy them over into a folder on your internal HD and then when the drive is formatted, just shoot them back over.
    -Tom

  • How do you use an external hard drive for your Mac (movies only), iTunes and Apple TV2 all together?  I can't put movies on internal HD as it would use it all up.

    any help is appreciated

    Welcome to the Apple Community.
    The following article(s) may help you.
    Moving your iTunes library to an external drive (Mac)
    Moving your iTunes library to an external drive (PC)

  • I have lost my external drive on desk top.  How do you remount the external drive

    I have lost my external drive from iMac desk top.  How do you remount the external drive?
    WindyCityNorth

    Kappy Thanks for help..  I had already tried the Disk Utility but external drive did not show.  What worked was to shut down every thing and shut off power to all.  Disconnect power to the external drive.  Connected power to computer and then restarted the computer.  After the computer was up and running, I reconnected power to external drive and then turn it on.  At this point the external drive returned to my desk top

  • How do I back up my Boot Camp partition to external firewire drive?

    I have a 15 GB Windows XP Boot Camp partition (FAT32). I want to back it up to a 120 GB external Firewire drive. (I know the backup won't be bootable). In OX X Disk Utility, I formatted the external drive as MS-DOS (FAT). I planned to do the backup using the Windows Backup utility.
    However, when booted into WinXP, Windows will not recognize the external hard drive. I thought I might need to create a FAT32 partion of 32 GB or less on the external drive, but I apparently can't do this in OS X or Windows (since Windows doesn't recognize the drive).
    Any suggestions on how to backup the Boot Camp partition will be appreciated. I'm mainly interested in preserving all programs and data. Ideally, a clone could be created that could be restored back to the original partition in bootable form, but from studying this and other forums, it dosn't seem to be easy to do this for a FAT32-formatted volume.

    My goal was to create a bootable clone of my FAT32 Boot Camp partition, while at the same time increasing the size of the partition from 15 GB to 32 GB if possible. This is what I did:
    1. As suggested in this thread, I used Disk Utility to create a disk image. I formatted it as MS-DOS (FAT), and made it 32 GB in size.
    2. Used the Finder to copy all files from my 15 GB Windows XP partition to the new disk image.
    The following steps were only to determine if the disk image is a viable backup:
    3. Removed the internal hard drive with my original Win XP partition, and installed a new internal hard drive.
    4. Used Boot Camp Assistant to create a 32 GB Boot Camp partition on the new internal drive.
    5. Inserted my Win XP installation disk and started the Windows installation. Formatted the new partition as FAT32. (I used the long rather than the quick format method--not sure if this was necessary.)
    6. Continued the Windows installation to the point of restarting the computer, at which time I used the Option key to boot back into OS X.
    7. Used the Finder to copy all the files from the 32 GB disk image to the new Boot Camp partition. (This overwrote a few Windows files installed by the aborted Win XP installation.)
    8. Restarted and used the Option key to select the new 32 GB Boot Camp Partition. Windows booted as usual with all files, programs, etc. from the original 15 GB partition. Windows did complain about "new hardware" and required a restart, but all appears normal.
    This indicates that the disk image containing all the files from my original Boot Camp partition is a viable backup, and can be used to restore the partition if necessary. I'm not sure if formatting the disk image as MS-DOS (rather than Mac OS extended) was necessary, or not.

  • 60 GB external Firewire Drive Won't Mount

    I have a 60GB external Firewire Drive that I have been using for a long time. I just turned on the computer and it won;t mount. I opened up the Disk Utility and I see that on the left side it says "57.3 GB Maxtor." I repaired permissions and verify disk. It still won't mount.
    I don't want to have to erase it if possible. There are files I need on that drive. How can I get it to mount so I can grab some files off of it and move it to another drive?
    Thanks in advance

    Hi Edwurd,
    What the message is telling you is that Disk Utility and the "underlying task," the Unix utility fsck, can't repair the volume.
    Time for stronger medicine if the data is critical. There are commercial products that work differently and can recover disks when fsck can't. Look at Disk Warrior or Drive Genius. BUT... given that Disk Utility thinks it's a "non HFS volume," I wouldn't be optimistic.
    If the external drive's data is unimportant - e.g., a backup you could rewrite - then see if Disk Utility can repartition and erase the drive. If only the catalog or partition map is bad, this will get you a working drive. But if you can't repartition with Disk Utility, suspect a hardware malfunction and check your warranty.
    Good luck,
    John

  • How can I initialize an external hard drive when disk utility won't work?

    Have a Seagate 300 GB external firewire drive. Formatted it for Mac. Had worked great and then one day it would not mount, got message box with choices of "initialize", "ignore" and 'eject". Clicking initialize, disk utility comes up with only the "first aid" button showing active. When I click on it nothing happens. As far as I can tgell there are no other options
    Any suggestions on how I can repair this drive or recover data would be much appreciated.
    Thanks, Jim

    OK, I suspect First Aid may be blank since Disk Utility "sees" the device but does not think there's anything on it.
    1. How about if you select the drive and then click the Erase tab?
    2. Also, what happens if you connect the drive, select Ignore, then open Disk Utility? Does the drive show up?
    3. What's your objective here? Do you want to try to recover data from the drive, or simply erase it? If you're looking to recover data from the drive, see my "Data Recovery" FAQ.
    4. Do you know what happened before the problem arose? For example, was there a power outage or was the cable or drive suddenly disconnected before the drive was Ejected? Any of these events can result in the drive's partition map being corrupted, leading to the kind of problems you're seeing.
    5. Did you build this FireWire drive? That is, buy and enclosure, buy a drive, and install the latter in the former? If so, have you checked the connections?
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Maybe you are looking for

  • How do I put a SolidWorks assembly (.SLDASM) into Adobe Acrobat XI Pro?

    I recently watched a video on Adobe TV called "Adding Interactive 3D Models in Technical Documentation."  In the video, a SolidWorks Assembly file (.SLDASM) was dragged into Acrobat 9 Pro Extended to create a 3D Pdf.  I have tried to do this in Acrob

  • Problem converting to PDF - headers disappear

    People, I have been using Acrobat 11 for a year with no problems. I am now creating Word documents using a new template, and when I PDF them their headers disappear in the PDF files. A colleague using Acrobat 9 can convert them to PDF without encount

  • My dream- an iphone 3g car adapter and charger WHICH

    Lets me decide on whether or not to charge while playing music or not to charge... Why I want this? because if I charge my iphone for 30 min every day it wil kill the already weak battery. So I rather have a car adapter that could be used as a charge

  • Sony Cybershot M1 / M2 videos don't import into iPhoto6

    Hello, I've been using the Sony M1 and now the M2 as my videoblogging camera. I love it because it does both stills and videos well. Since I use iPhoto a fair bit also, I was wondering why the Sony's MPEG4 video doesn't get imported into iPhoto as pa

  • Trouble Setting the structured app on import - FS_StructuredImportApplication

    Hello All, I have some referenced documents that I refresh when opening the parent document and I am trying to set the structured application on import. I am using>                     var importParams = GetImportDefaultParams();