How do you verify the source......

after I download Adobe Reader I receive this message. "download incomplete,the installation source for this product is not available.Verify the source exists and you can access it"
I also tryed to uninstall,but the same message appears
So what is a guy supposed to do now
Thanks
Joseph DeConda

The first part of that message means your firewall most likely has blocked access ot the download link.
When you see it during an uninstall, it means it's trying to remove a fiel that no longer exists.
Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
You may need to disable your antivirus if you continue to see the "source not available" message.

Similar Messages

How do you verify the completeness of a restoration drill?

One responsibility of the DBA is to ensure the database backups are usable. Running the restore / recover commands in rman is easy. However, how would you verify the correctness of the restoration? Or do you believe that when rman says it's Ok and oracle merrily open the database, then it's OK? And how about point-in-time recovery (which seems even more difficult to verify)?
(Even though this is a generic question, here is the a database version if needed as basis of discussion:
Oracle: 10.2.0.4
OS: RHEL 4
Edited by: thtsang on Oct 15, 2010 11:06 AM

I would prefer the verification to be done in database perspective. If there is no data loss / inconsistence in the database, it should also be OK for the application.
And if queries on key tables were used, has any one experienced any issue? If so, what's the cause and what's the resolution? And for restoration for hot backup or point in time recovery, it is difficult to confirm what's correct result, because the data was not fixed during the restoration.

HT4436 how do you verify the i cloud account?

how do i verify the icloud account ?

Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether.

How can you scan the Source Code of a bunch of function modules

We are in a 46C system. I need to be able to scan the soruce code of a bunch of function modules. I was unable to use the RPR_ABAP_SOURCE_SCAN and return the lines with the string I was searching for.
Thanks
Hari

Hi,
Read the main program that is the funtion pool into an internal table with statement.
READ REPORT
Use the key-word
SCAN ABAP-SOURCE
You can use the addition with includes as the function pool contains only include programs the with includes addition will read the source code present in the include.
Like this you can achieve it
" Example
DATA:
itab TYPE TABLE OF char255,
itab1 TYPE TABLE OF stoken,
itab2 TYPE TABLE OF sstmnt.
READ REPORT 'SAPLSFES' INTO itab.
SCAN ABAP-SOURCE itab TOKENS INTO itab1
STATEMENTS INTO itab2
WITH INCLUDES.
after this you can search the string in the internal table with lots of additions available in the SCAN ABAP_SOURCE
regards
sarves

How do you verify the itunes store terms of agreement for the IPad?

I tried to buy a movie but it said to verify the terms of agreement. So I followed the link but it doesn't have the agree button (or anything related to the agree button) anywhere

If you mean in the Downloads tab at the bottom of the iTunes app then you shouldn't need to. That tab just shows whether you have any available downloads from iTunes, if there aren't any then you just get the Terms link. If you've bought the film then it should have downloaded into the Videos app where you should be able to watch it.

How do you verify the size of a large ( 32K) plain text body

Hello All,
I am running GW 8.0.2 Hot Patch 3, using SOAP schema 1.04.
When I attempt to process a message, that contains only a plain text body with a size (in bytes) of 64,382 - the following sizes are reported by objects extracted from GroupWise, via SOAP calls:
Message Size: 71,425 (should be bigger than the plain text body).
Message Part [0] length: 70,854 - no idea where this value comes from
In the getAttachmentResponse object, the part has:
length: 87,772 - Which matches the Base64 encoded length, plus padding, of the plain text.
The actual size of the plain text (on disk): 64,382
I am hoping to use the HTTP GET method for extracting the large plain text object, which means that I will not have access to the getAttachmentResponse object.
So my question is, based on the MessageBody, MessagePart[0] length of 70,854 - is there a formula, or other way to determine the correct expected byte size of the plain text object to enable me to verify that the HTTP GET operation or the SOAP getAttachmentRequest completed correctly?
Regards,
Dave Stiller.

Hey Preston,
Thanks for the prompt response. Not the answer that I was seeking, but none the less an answer. Thanks.
Can I suggest an enhancement for a future release, to add an additional structure to the message object that allows you to detail the available formats and byte sizes of the formats that relate to the message body object. This could even be an extension/completion of the MessagePart object array on the Message Body. (One array component for each available format.) There are no issues when dealing with large body texts as attachments, but an accurate byte count is important to me.
This will enable us to verify that the message body content, downloaded from GroupWise, has not be corrupted during transfer - particularly important when using HTTP requests.
Have a great day,
Dave...
Originally Posted by Preston Stephenson
You will have to be careful in getting message bodies.
The plain text message body can come from different
sources and / or formats.
The message body can be stored in RTF format.
You can extract the plain text from the RTF text.
If there is a text.htm message body attachment, the
GW Client will extract the text plain text from the
text.htm attachment and will ignore the text plain
message body attachment.
There can be corruptions in the message body
attachment. The attachment can report a certain
size, but the actual data may be different.
You have to assume what is stored / returned is
correct. If you are bound and determined to read
the number of bytes recorded, you can cause
problems. There was one case where the attachment
was corrupt. The POA returned all the data that
was available. The application tried to read past
the end of the valid data and caused the POA to
crash.
You get all of the data in one HTTP GET call. In
that case, the "Content-Length" header will have
the number of bytes in the message body attachment.
Preston
>>> On Sunday, August 12, 2012 at 11:36 PM,
stillerd<[email protected]> wrote:
> Hello All,
>
> I am running GW 8.0.2 Hot Patch 3, using SOAP schema 1.04.
>
> When I attempt to process a message, that contains only a plain text
> body with a size (in bytes) of 64,382 ‑ the following sizes are
reported
> by objects extracted from GroupWise, via SOAP calls:
>
> Message Size: 71,425 (should be bigger than the plain text body).
> Message Part [0] length: 70,854 ‑ no idea where this value comes from
>
> In the getAttachmentResponse object, the part has:
> length: 87,772 ‑ Which matches the Base64 encoded length, plus padding,
> of the plain text.
>
> The actual size of the plain text (on disk): 64,382
>
> I am hoping to use the HTTP GET method for extracting the large plain
> text object, which means that I will not have access to the
> getAttachmentResponse object.
>
> So my question is, based on the MessageBody, MessagePart[0] length of
> 70,854 ‑ is there a formula, or other way to determine the correct
> expected byte size of the plain text object to enable me to verify that
> the HTTP GET operation or the SOAP getAttachmentRequest completed
> correctly?
>
> Regards,
> Dave Stiller.

How can you verify the digital signature inside a form?

I see Adobe has a separate solution called Echosign but how to use both forms and signature together?

Hi,
this is indeed possible.
You can check if the change value is larger than one character.
If so, the change value is pasted from the clipboard.
All you need is to add this Script (FormCalc) to the change event of your field.
if (Len($event.change) gt 1) then
$event.change = ""
endif

HT3576 How do you, verify that the network or firewall is not blocking access to port 5223.

How do you, verify that the network or firewall is not blocking access to port 5223.

Maybe:
http://answers.yahoo.com/question/index?qid=20110606132954AAZH4Tc
http://forum1.netgear.com/showthread.php?t=48533

How do you add a source to the Health app?

How do you add a source (ie, Nike +) to the new Health app?

http://help.apple.com/iphone/8/

How do you verify LR4 has the RAW plug-in 7.2 update?

How do you verify LR4 has the RAW plug-in 7.2 update?

Lightroom does not use the ACR Plugin. The best way to think about Lightroom is that it is "ACR" with lots of other functions/modules, Library, Web, Print, Publish etc. all in one Stand Alone Software package.
It does not require any other Adobe software to be installed on your computer for it to be fully functional.
It is not a substitute for Photoshop Cs / Elements but more of an alternative to ACR/Bridge that provides many of the functions of Lightroom but through PS CS..
That said you need to be running Lightroom 4.2 which is the equivalent of ACR 7.2. LR and ACR are updated simultaniously or within a few days of each other.

TS1463 how do you put the ipod into disk mode

how do you put the ipod into disk mode

iPod nano (7th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Home buttons simultaneously until the display turns black. This should take about eight seconds.
When the display turns black, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
iPod nano (6th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Volume Down buttons simultaneously until the display turns black. This should take about eight seconds.
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
iPod devices with a Click Wheel
If necessary, verify that your iPod has a Click Wheel.
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
Older iPod models without a Click Wheel
Before placing the iPod into Disk Mode, verify that it has a charge.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Play/Pause and Menu buttons until the Apple/iPod logo appears, then release them. This resets iPod. When you reset iPod, all your music and data files are saved, but some customized settings may be lost.
When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod should say "Do not disconnect".
source: Putting iPod into Disk Mode

How can i get the source code from java concurrent program in R12

Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
Zulqarnain

user570667 wrote:
Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
ZulqarnainDid you see old threads for similar topic/discussion? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Source+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How can I remove the " Source.vi" from long Express VI Names?

I am in the Moment working on the Development of an Express VI
library for test purposes.
How can I remove the " Source.vi" from long Express VI Names?
This happens when the Express VI is inserted in the blockdiagram
and listed in LabVIEW and TestStand Palettes.
By short names like "DAQ-Assistent" or "EasyCalc" the string " Source.vi"
is not shown at the end of the Express VI names.
I used The Express VI Dev Toolkit 1.0 to create the Express VIs.
Labview Version: 7.1 Base
TestStand: 3.1
It would be great to get the expert advice from the Forum for this issue!
Thanks a lot.
Andre

I think I understand what you are asking for. If I am wrong, please try to explain it a bit more.
The name shown may be different than the name of the vi file. To do this, your source VI and popup on its icon. From the short menu that comes up, select VI properties. In the top ring, select Window Appearance. The page that comes up lets you set various things that can affect the appearance of the VI. What you want to change is the window title. Uncheck the Same as VI name checkbox and change the string to whatever you want it to be.
I hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

How to find out the source of an event fired by button in a table in WD?

Hi experts,
I'm new to Web Dynpro and I need to know how to find out the source of an event (IWDCustomEvent) fired by a button in a table? I need to know which one is the clicked button (on which row)?
Help will be appreciated
Regards

Hi GLM,
thanks for your reply. Yes I know about that but when a round trip to the server is made the lead selection is at the first row of the table and when i click the button on, for example, the 3rd row the getLeadSelection method returns 1 and the color marker for the current row stays on the first row. So I need to click first somewhere else on the 3rd row and then on the button in order to update the value of lead selection and it's not very nice. So if you have some other idea it would be very helpful. Or perhaps some workaround.
Regards

In DBI , how to find out the Source Query used for the Report

Hi All,
How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
If anyone has ever worked on it...Please help me in finding it.
Thanks,
Neeraj Shrivastava

Hi neeraj,
You can see the query used to display reports.Follow these steps to get the query.
1)Login to oracle apps
2)Select "Daily Business Intelligence Administrator" responsiblity.
3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
4)now open the report which you want to see the query of
5)In view source it displays query along with the bind varilables.
Feel free to ping me if you have any doubts
thanks
kittu

How do you verify the source......

Similar Messages

Maybe you are looking for