How do you you create, write, and save files?

I created a VI to read 8 channels and display the waveform, which it does. But whenever I try to set up a way to save the data it never works. I want it to give me the option to create a new file, then write the data to there, and save it, and then close the file. How should I go about this?

I have not opened your attachment, yet.
Before doing so, you will need to decide if you want to write to:
a) a measurement file
b) a regular text file, or
c) MS Excel Spreadsheet
The method to write to the above are quite different. Please decide and let us know..
R

Similar Messages

How do you create an AcrobatXI zip file in windows 8.1?

How do you create an AcrobatXI zip file in windows 8.1? from acrobat.com docs? Sorry Not sure what community to ask this in this community? The email provider I was using didn''t seem to want to accept it through Adobe Send the first time and since Adobe Send ends January 6, I am assuming a zip file is preferable.. I thought I had seen an Adobe Zip file somewhere but haven't been able to locate it. Any help appreciated.
Thank you.
Sherrie

Hi Sherrie L,
Adobe Send is Adobe's current solution for sending large files. (It's Adobe SendNow that's retiring soon.) Can you tell us what trouble you were running into using Adobe Send?
There isn't a special version of Zip files for Acrobat, but you could reduce the PDF file size if you have Acrobat. Or, in Windows, you can create a Zip file by choosing File > Send to > Compressed (Zipped) Folder.
Best,
Sara

How do you combine audio and video files?

I've brought in a video file and an audio file, but can find no way to specify that they are a single source that should be compressed together. The documentation was of no use. How do you identify video and audio files as being one source?
Thanks!

Semantics, I suppose. In any case, you do need to go through Premiere Pro if you want AME to do the job. There are likely other encoders out there which can perform the muxing, though, if you'd rather not go through PP.

In Adobe 8 how do you create a bates log file?

I love this feature in Adobe 9 where one can select "output options" and change the way the bates stamped PDF is saved, to create a log file of bates numbers per document, etc. Are these same output options and bates log file options available in Adobe 8? Basically, how do I create a bates log file in Adobe 8?

This is a great utility---thanks for sharing it! The Javascripts folder can be hard to find--here's what worked for me:
For Macbook Pro users using Acrobat Pro X with OS X version 10 or greater, you’ll want to copy the unzipped “UVSAR_selectiveFlatten.js” file into the JavaScripts folder located in this path:
/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Resources/JavaScripts
*** IMPORTANT: To be able to see the Contents folder, you must Right-Click (Ctrl-Click if you don't have a right button) on the filename "Adobe Acrobat Pro.app", then select Show Package Contents from the pop-down menu. The Contents folder will appear in a new window and you can navigate to Contents/Resources/JavaScripts, and put the “UVSAR_selectiveFlatten.js” into the JavaScripts folder.
Once you've done that, restart Acrobat Pro and you'll find the "Flatten" option in your Edit menu. VERY handy! Tip: might want to save your original PDF file as a different version just to be safe---once you flatten the PDF, it can't be undone, so either just print and don't save, or save as different version if need be.

How do you play MPG and WMV files on a MAC?

I am no longer able to play MPG and WMV files on my MAC. I have Flip4MAC, which is I think what I used to use to play them (but not sure). All I know is that I used to be able to before but now they won't play. Do I need some sort of different software or has Microsoft started making these files in a way that won't allow MAC users to play them? If anyone is kind enough to help, please explain in the most basic terms as I'm not that computer literate.

If the .mpg/.mpeg files are non-rights-protected you should be able to play them in Quicktime or iTunes. If the wmv files are non-rights-protected you should be able to use Flip4Mac. If the mpg/mpeg or wmv files are rights-protected you'll need the software or subscription that allows you to view copyrighted files.

How do I get to download and save files again?

When I try to download or save a file, a file with any format, nothing happens. Only way of getting the file saved is to open it in its designated programme and save it from there. Certain file types can not be saved since they have no programme to open in (like .ies file, for example).
Changing the file behaviours will not help, it still behaves the same way, i.e. it won´t let me save straight from the browser.

You really need to provide more information if you expect anybody to help you.

Can I use the Time Capsule as an storage drive? Can I create folders and save files on it as with a external hard drive?

I want to know if I can use my Time Capsule as a storage hard drive instead of only use it to back up my Mac

Bravenewcharles wrote:
Ok, so while I edit my files in my Mac that will occupy some space on its hard drive that will be backed up in the TC. Does that mean that I will occupy two hard drives on the same stuff?
Exactly. That's kinda the definition of a backup. When (not if) something awful happens, like your Mac being lost or stolen, or the HD failing or getting corrupted, or you accidentally change or delete some stuff, you have a backup you can recover.
What will happen when my Mac's hard drive is completely full?
Don't let it. Delete things you don't need. If you can't delete enough, as Neil says, get an external HD for the "overflow" that won't fit, then let Time Machine back up both your Mac and the external. See Time Machine - Frequently Asked Question #32 for more info.
Message was edited by: Pondini

How do you create and save icc profiles using photoshop?

How do you create and save icc profiles using photoshop?

You don't. Color profiles require specific measurement hardware and software.
Mylenium

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

Hi Ed
Thank you for contacting me, however I already know how to save text to
audio files via timeline using the Export feature.
So my question was not entirely clear and I apologize for that. To explain
further, whenever I save a text to audio file, captivate takes me to a
default save as folder where I then have browse back to my production
folder where I am keeping all my Txt to Aud files. This is very tedious
process when you have alot of files to save. So my question was is there a
way to configure captivate so I can make my production folder the default
file for whenever I save a Txt to Audio file through Export feature that
the system automatically takes me to that production folder, and I am
spared the long tedious process of saving the file manually to the
prodcution folder I want.
I have copy the pathway to the production folder in the URL filed in the
Save As dialoge box and that workaround as cut the work down but I still
have to paste that URL field to point the file to the right folder. So it
would be nice if I could do everything automatically. Microsoft makes this
capability in their MS Office applications, so I was thinking Adobe might
do the same thing. Your help with this would be appreicated,
Thanks
Merrill Roberts
Sr. Training Specialist
SunGard Availability Services
Direct 925-831-7730
Mobile:415-215-9280

How do you create a unique folder to save a document?

How do you create a unique folder to save a document?

In the Save dialogue navigate to where you want it and either click on the New Folder button bottom left, or go command shift n.
Peter

How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can"t find in any of the tutorials.

How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can't find in any of the tutorials.

The steps would be :
- Add files from file menu > select pdf > add to site
- Select the content (rectangle,text etc) and click on hyperlink dropdown > it should show you the added files list
- Select the file you want to link
Thanks,
Sanjit

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

How can you create a playlist with music and music video and play those from same playlist through Apple TV?

How can you create a playlist on Ipod touch with music and music video, and play those from same playlist through Apple TV? I can download, create a playlist with both music and music video, stream that through the Apple TV with no problem. The sound and the information show up on the TV, but when it gets to a music video, it only shows the information and "artwork".
I also have a video playlist - videos play fine through the Apple TV, but will not shuffle through all videos - continues to repeat the same one. I have most definitely selected shuffle in both locations - from the playlist and on the ipod video screen while video is playing.

I finally got it... had to sync the photos with the music in iMovie, arrange the voiceover in GarageBand then export to iTunes, and then I was able to put it all together in iMovie and burn in iDVD... had a few glitches along the way but finally finished : )
Message was edited by: jpewald

How do you you create, write, and save files?

Similar Messages

Maybe you are looking for