How does ADS on CE environment communicate with a NW 7.01 EP Portal

I am at a customer site that is installing Adobe Document Services on their CE environment. The already have an AS Java with EP portal on it but decided not to use ADS on the portal server and instead, configure ADS on CE 7.2. Can you explain to me how the ADS on CE will communicate with EP Portal on AS JAVA NW 7.01?
I understand the connection with ABAP (using ADSUSER) and the RFC connection but I don't see how they can publish PDF's to the portal and have ADS on CE communicate.
Thanks for the information.
Peggy

i think you just have to configure the ws client in VA of nw7.01.
make it point to ads of ce server

Similar Messages

How does Creative Cloud for teams work with staff who work in two locations ie in the office/home

How does Creative Cloud from teams work with staff who work in two locations i.e. in the office and home?

There is no difference please be aware that each login is provided with two activations however. If you wish to have a computer at both work and home activated though that is perfectly fine as long as your employer is ok with using company software at home.

I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

do I need to create another account with a different email account
Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ???

I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ??? I have a great dell computer, Dimention 8400. Before I install firefox I want to know for no waste of time for either party..

Unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
If it was never registered to your account then it won't appear on your support profile : https://supportprofile.apple.com/
The only other ways to find it that I know of (apart from on the actual device) are via the packaging, the backup on a computer's iTunes : http://support.apple.com/kb/HT4061

How do I get flash to communicate with a database

Hi I would greatly appreciate some help here as I am getting overwhelmed by the variety of products out there. I have written a flash program using AS3 which allows the user to build a picture of a product using a variety of options displayed in checkboxes. Very simply these checkboxes either make a layer visible or invisible in my flash movie and certain choices may change the list of options. This information is currently being supplied by XML. Once the user has built his product, I would like to be able to save his choices in a SQL Server database and also be able to download his options again at a later date and view these choices at the manufacturing plant.
So far I have tried using asp.net to write to the database and have got the information to the asp.net program by using the querystring, however there may be up to 50 options which does make a querystring rather unwieldy. Also I cannot seem to send back information from the asp.net page to my actionscript.Can anyone tell me how to do this or give me an example? I am supposing that I use the response.write function in asp.net but what command in AS3?
I looked into the possibility of using a webservice but see that AS3 no longer supports this as all the functionality is in Flex. I have read about Flex but still do not understand whether it could help me and how it can communicate with my flash program and pass the options in and out of it.
I also briefly looked at Flash remoting which did appear as though it was the answer but is even more expensive to buy than flash itself.
Can anyone give me suggestions on how to move forward with my problem

I haven't worked with ASP, so what I'm offering is based on using PHP. For sending data to a database using AS3, you should be able to use the URLVariables class to pass the data to an ASP file. The ASP file will maage getting the data into the database. To get data out of the database, the most common method would be to treat the ASP file as a xml source, having it write xml formatted data to the Flash file.
You might want to Google "AS3 ASP SQL tutorial" and see if you get any results. Otherwise, here's a link to a tutorial for a PHP/MySQL version that might at least give you an idea of the processing scenario...
Flash - PHP - MySQL
http://www.gotoandlearn.com/play?id=20

How do I get LabView to communicate with HP4142B, using GPIB?

I have a PCI-GPIB card from NI and running Labview 6.1 under Windows 2000.
I have trouble to communicate with a HP4142B.
Every time I send a GPIB-command to the 4142B I get an EABO error. The instrument seems to receive the command
but does not give any answer. There may be some trouble with the EOS character but I don't know how to correct it. Communication with other instuments (i.e. HP34401A) works without this problem together with LabView.
I have also tried to send commands with the NI-488.2 program but the EABO error remains.
First I thougth that HP4142B has got a HW error but then I sucessfully used a program called "HP VEE".
The instument then worked without any trouble so there must be someth
ing else that is incorrect.
It is important for me to get the HP4142B to work with LabView and the PCI-GPIB card so I hope you can help me solve my problem!
Jon Alfredsson
M.Sc.EE, Ph.D student
Mid Sweden University

Hello John,
This sounds like a classic case of missing termination characters. The termination characters should be specified in the instrument's user manual. HP VEE is probably adding certain termination characters by default. Common termination characters are a carriage return, a linefeed, or both. In LabVIEW you can easily add termination characters to a string by right clicking on it, selecting / codes display, typing in a /r or /n at the end of the string. Alternatively, if you are using the regular 488.2 VIs (not VISA), you can specify different modes on the write commands. Each mode corresponds to the termination methods/characters that will be appended to the command. See the LabVIEW detailed help on the GPIB write VI for more information.
Regards,
Ra
y K
NI Applications Engineer
Ray K
NI Applications Engineer

How to use Microsoft SSIS to communicate with SAP Extractors? Is XI a way?

Hello Extraction Experts!
here is a challange for you:
Our customer wants to pull GL Data from ECC6 as well as other various R3 Special Ledgers into a database (Not SAP BW at this point in time!), which can then provide the data to a 3rd party tax calculation tool.
Until we are able to move to SAP BW we would like to use the delta enabled General Ledger extractors to pull the data into SQL Server by using MS SSIS (Event Handler). The reason for this is that the standard extractors are
a) delta enabled and
b) provide data enhancements which otherwise we would have to rebuild. (like currency transformations or calculation of the cumulated balance)
So the big question is now how can Microsoft SQL Server with SSIS be configured in such a way that it can communicate with the standard extractors? All settings which are in the Infopackage need to be configurable (Data selection, update mode settings for full vs. delta request, schedule and so on).
The extractors use Services API, iDocs, RFC.
What exaclty needs to be rebuild and how? Is XI an option here? If we dont extract the data in the wway SAP does it it will be very difficult to move to SAP lateron.
Thanks for all your comments and help.
kind regards,
Marko

Interesting
Of course the easiest way to do it is to install a GL DSO on BW extract the data into there and then extract the data out of BW
However to do this you will need hardware and an additional license to extract from the BW system (it does cost quite a bit for the license - but it should be discountable)
The idea of using the delta extractors is fine - but to be quite honest the logic in the FI extractors can easily be built into a ABAP to dump the data out to a flat file
That will be cheapest option without any doubt - not the most fancy but definately cheaper
So I would approach it as - take the GL4 extractor code, hack it and write the output to a flat file.
The GL4 extractor does basically this..
read bwom_timestamp t get the last timestamp selected up to
read bwom_settings to get the safety mechanisms (ie how the timestamps should be manipulated)
loop around a datapackage size
   select * from bkpf where cpudat between two datetimestamps (from above)
     select from bseg for those records
     read into an itab and manipulate the data
     send package to BW
endloop
loop around a datapackage size
   select from bwfi_aedat where change time between datetimestamps
     select from bkpf/bseg for those records
     read into an itab and manipulate the data
     send package to BW
endloop
update the timestamp table with the timestamps used
Now you will need to have some sort of table in your source application which will resolve the duplicates - as GL transactions can be modified and FI does not provide a before and after image - ie you only get the after image

How SAP AII(Auto-Id-Infrastructure) communicate with PI

Hi,
How SAP AII communicates with XI,??
And , what is XI content in SAP AII.
-Surya

HI,
Please refer this:
Communication Channel for Auto ID
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/401e51e9-8016-2a10-56be-e354a54a118b

How does one use an external microphone with the internal camera?

I want to use the internal camera because I don't have anything better but I want to use an external mic to record video and sound simultaneously, for a video blog. How does one accomplish this? I'm getting no help from the manual.

Try this. Connect your external mic, either through the audio line in port or, into a USB port if it is a USB mic and then go to System Preferences under the Apple and select the Sound icon under Hardware. Click on your mic shown in the list of input devices.
Hope that works for you.
Forest

How can I use Voip to communicat with my voice in Labview

i want to be able to call my computer using Voip. I know this service
cost money. I dont just want to call the computer, i want to call
labview and all labview to have access to my voice, so i can do speech
commands on it.

Hello,
Thank you for contacting National Instruments. I would like to apologize for the delay in responding to your support request. I understand that you would like to use Voip capabilities to access your computer remotely and then communicate with LabVIEW using speech recognition.
I know of a LabVIEW example file that describes the voice recognition capabilities of LabVIEW. Also, there is a link to example programs within this database entry. To access the entry, go to the National Instruments support portal: http://niweb2.natinst.com/ae/portal.htm and search for �voice recognition LabView.� Click the first entry in the list: �Voice Recognition in LabVIEW - Example - Development Library - National Instruments.� You will be able to find helpful information here.
I hope this helps! Please let me know if I can help you further. Have a great day!
Kind Regards,
Joe Des Rosier
National Instruments

How does scaling work under Windows 7 with the new MBP with retina display?

After installing Windows in a boot camp partition on the new MacBook Pro, how does scaling work compared to OS X? Does Windows know to have several pixels imitate a single pixel like in OS X when running in 1440 x 900, or is there no scaling effect available?

I suggest reading the following article that was published yesterday...
Windows 7 Tested on Retina Display

HT4623 How does one get IOS5 to IPad with IOS4.3?

Tried Settings but no update shown.
Apple support site does not show how tondownload IOS5 to pad bought in September 2011 using IOS 4.3.
Help required

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

HT2905 How does one get rid of duplicates with iTunes 11.0?

Found an old Apple post about how to find duplicate files in iTunes. iTunes 11 seems to not have this ability, or at least the same way of doing things. Can someone explain how to find duplicates with 11?

Right now you will have to do it manually by just sorting by track name and looking, or use a third-party tool such as Dupin. Apple has said that the Show Duplicates feature will return in a future update, but provided no timeframe.
Regards.

How does WDT's 't0' synchronize with computers clock?

When reading a MIO-16E DAQ card with the Waveform Data Type the t0 value returned is local date and sample time resolved to fractions of second. How is this value sychronized to the system time? How closely will date/time stamps generated by other 3rd party app's match DAQ time for common events?

Hello,
To my knowledge, the "t0" value is obtained whenever the AI Start function (possibly the AI Read...I'm not entirely sure) is called in your block diagram. At this point, the function simply queries the system clock and brings back that value as the t0 value. I believe that queries to the system clock, regardless of programming environment, have an accuracy on the order of 10s of milliseconds. Thus, if you have other 3rd party applications making system clock queries, you should find that the times given in all your software applications should be very close to the same (on the order of 10s of milliseconds).
I hope this sheds some light on your question. Good luck with your application, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications E
ngineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How does oracle determine to return results with progression

Hi all,
I am having some difficulty with using the progression funcionality in oracle text search.
I am basing this on the oracle example at http://www.oracle.com/technology/products/text/htdocs/prog_relax.html?_template=/ocom/print
When I set up my tables and idexes as such:
create table mybooks (title varchar2(20), author varchar2(20));
insert into mybooks values ('Consider the Lillies', 'Ian Crichton Smith');
insert into mybooks values ('Sphere', 'Michael Crichton');
insert into mybooks values ('Stupid White Men', 'Michael Moore');
insert into mybooks values ('Lonely Day', 'Michaela Criton');
insert into mybooks values ('How to Teach Poetry', 'Michaela Morgan');
insert into mybooks values ('my test', 'vs.update flag');
create index auth_idx on mybooks (author) indextype is ctxsys.context;
note I added the "my test" entry;
now when I run the query:
SELECT score(1), title, author FROM mybooks WHERE CONTAINS (author, '
<query>
<textquery>
<progression>
<seq>flag update</seq>
<seq>?flag ?update</seq>
<seq>flag OR update</seq>
<seq>?flag OR ?update</seq>
</progression>
</textquery>
</query>', 1) > 0 ORDER BY score(1) DESC;
I get no results.
however if I switch the sequence to:
SELECT score(1), title, author FROM mybooks WHERE CONTAINS (author, '
<query>
<textquery>
<progression>
<seq>?flag OR ?update</seq>
<seq>flag update</seq>
<seq>?flag ?update</seq>
<seq>flag OR update</seq>
</progression>
</textquery>
</query>', 1) > 0 ORDER BY score(1) DESC;
The row I am looking for comes back.
I do not understand why in one case it returns it while in the other it does not. Should it not return it either way just with a lower score?
Any help would be appreciated.
Thanks,
Mik

Hi,
I am running 10.2.0.2 on solaris(x86) system.
Referring to http://www.oracle.com/technology/support/patches.htm this appears to be the most recent patch level for this os/processor combo.
Is there another patch/hotfix available that I am not aware of or a workaround to this issue?
Thanks,
Mike

How does ADS on CE environment communicate with a NW 7.01 EP Portal

Similar Messages

Maybe you are looking for