How does an Endpoint Choose what Zone on a Gatekeeper?

Hi,
If I am configuring a gatekeeper cluster of 2 gatekeepers, and I have 3 local zones on the gatekeeper, how do endpoints that register to the gatekeeper choose what zone to go in?
Can you have multiple 'local' zones on a single gatekeeper?

In gatekeeper call routing we have something like yes or no terms that is how a gatekeeper will route a call based on an incoming Admission Request message (ARQ) message
Start:E.164 number match-yes-Target zone=matched endpoints zone- via zone processing -send ACF
NO Match
Tech-prefix match-yes -strip the tech-prefix-hop-off tech prefix - targetzone=hop-offzone
NO Match
ZONE-PREFIX match-Is arq reject-unknown prefix set? -send ARJ
No match
Target zone=matched zone
Here are the good documents;
The behavior of a gatekeeper when it processes a call request in the form of an admission Request (ARQ) from an H.323 endpoint.
http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00800a9a56.shtml
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a00800c5e0d.shtml#zonesandsubnets

Similar Messages

My iPhone was stolen and I have contacted the police who are using the meid number to locate. How does this work and what are my chances of getting the phone back?

My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is.

How does google work out what country you are browsing from?

Hi,
Does anyone know how sites like google know what country you are browsing from and automatically forwards you to the local country site? I would like to do something similar with an ApEx application I am writing, showing country-specific things without prompting the user for their country.
Thanks,
Bill
Message was edited by:
user497072

Google for keywords like geolocation IP address
See
http://linuxjournal.com/article/7856
Read all the comments people have written for that article, they are very informative.
I found http://www.dnsstuff.com/tools/city.ch to be uncannily accurate!
See http://www.ip2location.com/

I'm still confused!!! How does it work and what happens to...

I have spoken to peeps in apple store as well as apple support but its like talking to geekbots. I have a mess of a music collection on at least two devices and a hard drive. If I purchase iTunes Match what exactly happens?
Do I sign up on my m/mini then later log in from macbook and iT/Match will automatically find the additional songs that are on Macbook and upload them too increasing my overall collection?
How does it improve the rate to 256? Is that only when lstening to streamed music or does it upgrade the songs on my hard drive?
It feels like something that was thrown out there but not fully explained, no wonder I don't know a single person that has subscribed

yerpal wrote:
Do I sign up on my m/mini then later log in from macbook and iT/Match will automatically find the additional songs that are on Macbook and upload them too increasing my overall collection?
Yes. Be sure and do one computer at a time and do not enable iTM on any iOS devices until both computers are finished with the initial scans.
yerpal wrote:
How does it improve the rate to 256? Is that only when lstening to streamed music or does it upgrade the songs on my hard drive?
If the song is "matched" then you delete the version that is your iTunes library, but not from the cloud, and download the matched file. Nothing is done automatically.
yerpal wrote:
It feels like something that was thrown out there but not fully explained, no wonder I don't know a single person that has subscribed
See this page on the Apple web site for more info: http://www.apple.com/itunes/itunes-match/

New HD installedby apple/how do i pick/choose what i want to put back on?

Hi.
I had new hard drive installed. i had backed up onto my external firewire hard drive. I need to reinstall tiger from install disc and since i used carbon copy cloner when i bought laptop I don't need 3/4 of what is on on my backed up
external drive and it is using up tons of HD space. How do I pick and choose what i want? AS an example in my mail i have all the emails from my old work account from 3 years. I only want my .mac and sbc mail saved.
any advice? i'm willing to take the time....it needs to be done. there is so much junk on there and programs i never use.
thnks. poww.
powerbook G4 (15- in 1.67 /1.5GHz) Mac OS X (10.4.9) 80 GB HD / 512 ram /superdrive

Hi
The data you don't need any more you could copy
it to a cd or dvd and then delete that data from
your hard drive
That way you would make room on your powerbook
and still have that data on disks if you might ever
need it again
Hope This Helps
iMac G5
Mac OS X (10.4.9)
Hi....maybe i need to be more clear.
1) the new harddrive came back with my original Panther on it. and no data.
2) do I need to reinstall from the original Tiger disc I have? or just use the firewire exteranl drive with my backed up stuff I want and don't want and act like it is transferring data from another mac?
3)When do i get the chance to pick and choose what i want to reinstall and what i want to put onto a dvd?
thnks....POWW

How does iPhoto work? What are the guts?

I am a recent switcher from Windows and have been running OSX since the black MacBooks have come out. I used and loved Picasa on windows for pics. I have been using iPhoto and have run into problems.
I am trying to get my head around just how iPhoto works. I am interested in how iPhoto imports, stores and works with photo libraries and photos. It seems extremely convoluted to me. Here is an example.
In my 'Pictures' folder, I have folders: 'Personal 2000' , 'Personal 2001' , 'Personal 2002' , etc, etc
- I open iPhoto and choose 'Import to Library...' I choose to import a single folder from 'Personal 2002' titled 'xmas'
- I now have in that same 'Pictures' folder a folder called: 'iPhoto Library'
- in the 'iPhoto Library' folder are now folders called:
- 'Data'
- 'Modified'
- 'Originals'
- In each of these new folders (data, modified, originals) are now folders with just years
-'2002'
- and then in '2002' in each of those folders there is a folder called 'xmas'
- and in each xmas folder there are now four copies of my original photo
So I have gone from one original photo to four photo in four different places. This is crazy! I am trying to get my head around things and understand how to work with iPhoto and organize things but I could use some help.
Please help me understand. Does the book iPhoto 6 the missing manual help explain????

Mike
The point of iPhoto is that it does the file management for you.
It's a database, with built in image viewer and lightweight editing. The database is designed (like all databases) so that you interact with the data via the application, not the Finder.
So in your iPhoto Library Folder you will find various files that make up the Library, plus three Folders.
Originals: This contains the photos as they were downloaded from your camera (or scanner)
Modified: This contains the photos that you have edited or altered in any way - fixed red-eye, rotated, whatever. This allows you to use the Photos -> Revert To Originall command - which allows you to dump changes that you may not like.
The data folder contains the thumbnails that the app uses to display the pics in the iPhoto WIndow . SO you can see there is no actual duplication, but apparently much!
If you use iPhoto to do the file management then your folders become irrelevant, and once your content that the photos are safe in iPhoto you can trash them.
You can keep your own folders and do your own file management (go Preferences -> Advanced and uncheck Importing - Copy Files to iPhoto Library Folder ...) and then iPhoto will leave your file structure alone, However it will still make the data and Modifieds folders.
Through the iPhoto WIndow you can do everything you need to do with the photos. You can make slide shows and albums, keyword for fast searching, make smart self-updating albums, effortlessly export the files. Evne just drag and drop one to the desktop. In all caes iPhoto works with a COPY of the file, so that your original remains safe and sound. And of course, you can completlely recreate your folder organisation in the iPhoto WIndow .
I hope that's clear, if you have further questions feel free to ask more.
Regards
TD

How does one programatically determine what folders a given file is in?

I'm attempting to get a list of the folders a given file is referenced in. It's quite easy given a folder to determine what files are in it, but the reverse seems to be more difficult. I can't seem to find a suitable function to do so. I've looked at the 'getLeftwardRelationshipObjects' and the like, but I really am unsure as to what that function will return. Any assistance would be greatly appreciated.

So, in your case would it return an array of oracle.ifs.beans.Folder objects? It can't return oracle.ifs.beans.FolderPathRelationship objects because that does not derive from PublicObject from what I've seen. Thus, I could just cast each of the returns PublicObjects to Folders? Thanks a lot for your assistance!

How does Time Machine decide what to delete when its disk gets full?

Time Machine deletes the "oldest" backups when it needs more room for a new backup. But exactly what does that mean? Does it delete the oldest backups for the disk being backed up? Or does it delete the oldest backups across all source disks?
For example, if I back up N Macs to a single drive until it is nearly full, what happens when I add the N+1th Mac and start backing it up? Will it remove some existing files to make room for the new disk's backup, or will it just say "no more room"?
The answer to this question will affect my choice of backup disks to purchase.

If you're backing up multiple Macs to a TM backup Volume then if the TM Volume's free space becomes exhausted and TM cannot find room for the current backup it will start trying to delete the oldest backup snapshots associated with the Mac being backed up. It will not touch backup snapshots for the other Macs.
After 37 days all TM snapshots will be weekly snapshots (with a Sunday date). So if you've been running TM for 37 days or longer there will be one or more weekly snapshots. TM will start with the oldest weekly snapshot and start trimming away to make more disk space available.
TM is supposed to alert you BEFORE it starts deleting oldest snapshots but at this time it will perform these deletes silently and as much as it can and then only if there's insufficient space will it tell you it has deleted old snapshots but there's still insufficient space for the backup

OnChange() event how does it work and what is the syntax

hi,
i have a field (County) on a form in a jsp page that needs to get all its values from the database and present it to the user also i have another field (year) this also needs to get all its values as a drop down from the database.
i dont have any lib tag available to use and can't afford the time to set this up. so just have to script in jsp or use beans in jsp.
my question is 2fold
Q1. - i was thinking of having a DataAccess (dA) object to run a sql to select * distict couties ...
also have another query in DataAccess select * Distinct year....
and in the jsp instantiate the (dA) and iterate through and fill the select drop down box - how to code this syntax i'm not sure and if this is the correct approach or the only approach would appreciate some sample code that i can mess around with thanks.
- is above approach best way of doing this. - also taking into account Q2.
Q2 - when the user selects county then i need to fire a onChange event - probably using javascript but not sure how this works - bascially i need to then update the year drop down according to the below sql-
again how is this possible - and is this the best approach or will it be too many calls to the database - especially consdering that the forms are all part of a search tool.
SELECT     DISTINCT     v.year
FROM          v_volumes     v
WHERE          v.county     = <the selected county>
OR          (v.county_reference     =
               (SELECT     ca.county_reference
                FROM          county_aliases     ca
                ,          counties     c
                WHERE     ca.county_reference_also_called     = c.county_reference
                AND          c.county     = <the selected county>)
ORDER BY v.year

Sorry to rain on your parade, but its not going to be quite that simple.
Populating a second dropdown depending on the first one, has been discussed quite in depth on this forum, I suggest you do a search to look at older posts.
Javascript code cannot call java/database code from an onclick event.
The best it can do is trigger a form submission, which reloads the page
running any java/sql code that displaying the page entails.
So onlick event on the first dropdown triggers a form submit, which loads the page with the correct values in the second dropdown.
con: requires a page request
The other approach is to download ALL possible values to the jsp page, and have javascript handle the swapping of values.
pro: no page refresh needed
con: must have all data available on the page. javascript is a bit more complicated.
Hope this helps,
evnafets

TS3376 just installed find my iphone app and when I logged in on the app and on the computer, it showed the location of someone else's iphone in the same building as me!!!! how does this happen and what do i do to see mine instead?

Just installed Find my iphone app and when i logged in on the phone and then on my computer, it showed me somebody else's device that is in the same building as me and not my device...how do I fix this?

we have problem solved:-)

How does Photoshop CS6 choose the video card for its Graphics Processor?

Running a Intel Mac on 10.74 - CS6
I have two video cards running three Dell Monitors.
The ATI 5770 (runs the 24") is on the 16 lane PCI slot and the older Nvidea 8800 GT (running two Dell 19") is on the 8 lane slot.
But photoshop chooses the slower card on the slower lane.
Any advise welcome to change this.

It's not really Adobe's fault.
The simple fact is that most of the software design that supports display processing is still mired in the days where a computer had one monitor. Making things worse is the fact that the GPU makers don't really have any incentive to make their hardware/software work in a system with other GPU makers' hardware. In a selfish sense, quite the opposite. Who's at fault when your ATI and nVidia cards don't work together?
Macs have just as many problems as PCs - possibly more, since Mac users don't have the luxury of mixing and matching driver versions.
Many modern video cards are made now to support sometimes up to 4 monitors.
-Noel

How does charging work? What are the rates?

Just signed up for STG. Before I get going with it, just want to make sure I fully understand it.
- I call the local number assigned to the out of country one
- I'm charged local rates for the call (uses my normal cell minutes)
- My Skype account is charged for the call - same rates as when I use the software?
Thanks.

od1 wrote:
- I call the local number assigned to the out of country one
- I'm charged local rates for the call (uses my normal cell minutes)
- My Skype account is charged for the call - same rates as when I use the software?
Hello,
1. Yes.
2. No. Your Skype account is charged with the cost of the call at the prevailing Skype call rate to wherever you are calling. You can use either a Call Plan or Skype Credit.
3. Yes.
Skype To Go number call costs break down into two parts:
1. Operator costs
Dialing your Skype To Go number is a local call in most cases. This may be included in the free minutes you get
from your operator.
2. Skype costs
The call is charged at Skype's low rates, the same as when
calling phones from Skype on your computer.
Effectively - for the cost of accessing your local STG # (it may be free within your cellphone Plan) you have the freedom of calling
anywhere at Skype rates using your cellphone or landline.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

How does Xsan work, and what do I need?

Hi,
I want to run one copy of Logic Express on around 15 iMac's. The storage for Logic is going to be on and XServes, but teh actual music will be stored on the school network. What would i Need? (hardware wise?)
Thanks,
James

If you're going to use iMacs, you don't really need Xsan, because it uses fibre channel for storage and you can't put a fibre channel card in an iMac.
Probably you want an Xserve + Xserve RAID set up as a file server.

How does IOS choose what IPv6 source address to use?

I have a 3750X with IOS 15.2.2E.
I have multiple IPv6 addresses on the default VLAN (VLAN 1):
ipv6 address 2001:470:...../64
ipv6 address 2001:470:...../64
ipv6 address 2605:A000:..../64
I have one default IPv6 route:
ipv6 route ::/0 Vlan1 FE80::.....
S ::/0 [1/0]
via FE80::....., Vlan1
My question is: when I issue a ping from the 3750X, how does the switch choose what source address to use?
Currently, it seems to use the 2605:A000 address, but why?
Can I change this behavior?
Thanks!

OK,
How about my second question: Can I change this behavior in IOS?
Thanks!

What is Bootstrapping in LYNC ? how does it work?

could anyone explain..whats bootstrapping in LYNC? how does that work? what is it used for.??

bootstrapper.exe is called by setup.exe, bootsrapper.exe is responsible for deployment and configuration of server roles.
The bootsrapper receive the configuration from the configuration of the topology builder
regards Holger Technical Specialist UC

How does an Endpoint Choose what Zone on a Gatekeeper?

Similar Messages

Maybe you are looking for