How does cc teams work with upgrades (CS3+)?

We had a break in and all our computers were stolen, we are now looking at CC teams.
My question is, how does this work with the upgrade solution? Do we need a serial for each seat we add?
Also what if a person leaves and we delete that seat and add a new seat for a new user, does the discount apply to the new seat?

OtherDamonG wrote:
Any insight into the discount query?
You should be able to get all information here: www.creative.adobe.com/plans
OtherDamonG wrote:
Also you are allowed to have 2 installs under one seat. are there any restrictions on that, that you know of?
Yes, One user is allowed to install it on Two Computer's
Cheers
LP

Similar Messages

How does adobe encoder work with windows 8? I can't get it to work.

How does adobe encoder work with windows 8? I cant get it to work.

Flash Media Live Encoder doesn't work with Windows 8.
The best it gets is Windows 7 64 bit.

How does ultra violet work with Ipads

How does ultra violet work with iPads? Does this require adobe flash player?

Yes and iPads don't carry Adobe Flash Player.

How Does the scheduler works with ODI engine

Hi All,
I am new to the ODI and I was going through the documents over the web regarding the scheduling.
Can anyone please let me know how does the Scheduler in ODI is coupled with the ODI engine.
How does the internal scheduler works and how does the external one works. What are the processes the it calls while invoking the scheduler.
Your help will be highly appreciated.
Thanks,
Sumit

Scheduling in ODI is controlled by a special type of ODI agent, strangley called the ODI scheduling agent. This agent is installed as a service and as well as being responsible for all tasks associated with a normal agent is also responsible for managing ODI jobs based on any scheduling information associated with an ODI scenario. All scheduling information is stored in the ODI repository and the scheduler agent reads from this to determine which jobs/scenarios need to be executed and when.

How does syncing Notes work with Mountain Lion ?

How does syncing Notes with Mountain Lion?

Notes are synched via IMAP. IMAP is a protocol most frequently used by email.
So if you have an iCloud account and have set up a @me.com email address, that's what is used to sync. For Gmail, that can be used as well, though Gmail's IMAP support has to be enabled on their site and their implementation is very nonstandard and can be problematic. Best is to sync notes via iCloud.

How does Dreamweaver CS4 work with CS3 Design Suite?

I am looking to purchase Dreamweaver on my computer however I currently have the CS3 versions of Photoshop and Illustrator installed on my computer. Will the DW CS4 version work if the rest of my Design Suite is CS3 or should I look to purchase CS3 if available? Any advice would be appreciated. Thank you.

Dreamweaver 3 will open a file in Photoshop, so DW CS4 should do the same. I think you might have problems with Adobe's Bridge. And it's possible that DW CS4 might decide that previous versions of Flash, Fireworks, Photoshop or Illustrator are not supported. So workflows may be a little more disjointed.
So the real question will be: Do the advantages of DW CS4 outweigh possible hurdles in workflow?
I will frequently open and replace graphic images using Photoshop without Dreamweaver open and, when I open the website, everything falls into place. I did that for a number of color changes and I worked exclusively in Photoshop for the first part of my day, replacing colors that were designed to be part of the website with the client's specific pick. I tend to save graphics as .PSD files and then use Photoshop's Export to Web and in CS3, Photoshop will remember two different paths for a Save (PSD) and a Save to Web.

How does xalan.jar work with jdk1.3.1 and not work with jdk1.4.1

Hi,
i am using java, xalan, xerces for web development. The environment is jdk1.4.1, xerces.jar, xalan.jar. i am facing problem while transforming xml, xsl. Its giving the following error
java.lang.NoSuchMethodError: org.apache.xalan.xslt.Process.getDefaultLiaison()Ljava/lang/String;
at org.apache.xalan.xslt.XSLTEngineImpl.(XSLTEngineImpl.java:367)
at org.apache.xalan.xslt.XSLTProcessorFactory.getProcessor(XSLTProcessorFactory.java:79)
I tried with jdk1.3.1, xalan.jar, xerces.jar. Its working fine. Can anyone tell me what is the problem with jdk1.4.1 ?
Regards
Ashok

I have the same problem, but the version within SUN seems imcomplete,what version is ?
For example I am using the xsl tag library provided by Apache (I know this now deprecated). In its ApplyTag.java it uses XSLTDataSource this is not in the SUN 1.4 distribution so it falls over. If I add XALAN 1.0.1 it falls over because it on getDefaultLiason() because it starts loading somne classes from rt.jar and some from xalan.jar, how are you meant to override this.

How does cloud storage work with my iTouch?

Lately, I've been receiving a message stating that i need to go to Settings for my storage because I am basically running out of space on my iTouch... I have the cloud and it says I have 5.0 GB Total Storage and 4.0 Available Storage... So, How Am I Low On Storage???

Hello Luupymichelle,
Glad to see you on-board. Well surprisingly I had a similar issue with my iPhone 4G and then I just reboot my device and things get back to normal then. Try this, if it works for you. Elsewhere, try what AnaMusic has recommended. Just got a statement from the source link shared above: You can manage your iCloud storage space (for example, delete old email messages) from any device.
But i think your case is something different. It is actually showing 4.0 available, right? Try the magic of rebooting your device, it it works then cheers and if not then look around for some other options. By the way, which OS is yours?
Thanks,
Sab

How does Time Machine work with Boot Camp?

Hello, I'm going to install windows (I don't know if 7 or 8.1 yet) by bootcamp,
and I need to know if TIME CAPSULE work also in Windows mode, and if I have to configure it in a particular way.
I apologize for my poor english. Thank you at all. Andrea.

I have no really knowledge of how Parallels work other than it is a Virual Machine software program that create a Virtual Machine, Mimics REAL Hardware (Virtual Hardware), to run Windows under Mac OS X. So with that all the files are OS X files, Mac Format files, and Time Machine can and will back those up. But that will not backup what is on the Boot Camp partition. To do that you need either a Windows backup program or WinClone to do it when you are booting from OS X.
Google WinClone to find out what it is.

How does volume automation work with multi-timbral instruments?

I have Garritan Aria player as an AU plug-in. I launch it as a multi-timbral instrument and 16 tracks appear. I load instruments from Garritan Personal Orchestra into the player and record parts on the tracks. So far so good. I can get a rough overall working balance easily enough with the Aria faders - but then I want to use volume automation to do the detailed mixing (boost the oboe, dip the brass for that bridge passage, etc). It doesn't work. Anything I do to one track affects all the others - they are all reading & responding to nodes placed on any of the tracks, so I don't have individual control of instruments. Help! - what am I doing wrong? I've tried using Hyper Draw instead - this seems at first to offer individual control; but if I enter node data on more than one track at the same place in the music (boost oboe, dip brass) the channel fader goes crazy - which isn't at all what I want. It looks to me that because the 16 inputs are all assigned to the same synth, the channels are locked together as a group, so level changes entered on any one track are applied to them all. That's silly, so I must be doing something wrong. Can anyone help?

OK, I'm nearly there, I think, but it's a bit weird (I'm using Logic Pro 9.1.8). I can record to the aux tracks (I'm just entering note data on the piano roll, just to test it), but all the sound seems to be routed just to Aux channel 2. If I solo the Instrument channel, I hear all tracks together. If I solo Aux 2, I hear the same thing. If I solo any other Aux track, I hear silence.
What I've done:
1. start a Logic project, with one software instrument
2. insert Aria player, as multichannel, 16x mono.
3. open the Logic mixer and click the + button at the bottom of the channel several times to add aux tracks (they come up Aria Player 2, 3, 4 etc, routed to Stereo Out)
4 ctrl-click on each channel and select 'create/select Arrange track'
5 insert instruments into Aria slots, leaving them as default (Output 1/2 for all, midi channel 01, 02, 03 etc)
6 enter note data on piano roll for the instrument track and each aux track
The instruments are correct for each track, but, as I say, I can only hear them as a mix on Inst 1, and as a mix on Aux 2 (track 3). I can't hear the solo output of any track. It's a mystery to me why this is happening, and why it is Aux 2. Am I missing something?
cheers
penpals

How does Business content work with BI 7 and R/3 4.6 as backend?

Dear Bwers,
We have BI 7.0 with source system as R/3 4.6. I have the following questions:
1. I want to know how to install new BI 7.0 datastructures from business content when the datasources from R/3 are in the old version?
2. Is Business Content upto speed with the new structures like transformations and DTPs?
Any ideas?
Thanks
Raj

hi raj,
i don't think BI 7.0 and r/3 4.6 has good integration between them.
may be it's possible with after 4.7 versions. check it out
regards
harikrishna.N

How does Lion & FileVault work with Bootcamp

Hi,
I am just installing Lion on my computer. I was wondering if the FileVault will encrypt the Bootcamp stuff please?
Thanks

It doesn't. But it does mess up windows by making it pretty much unusable. Supposidly there is a way around but I haven't found out how to do it yet.

How does HP K8600dn works with mac OS 10.5?

We're going to buy the lan printer HP OfficeJet K8600dn, but we haven't find yet information about compatibility.
It will be used via ethernet.
Does anyone have information about this printer?
Tnx.
Matteo

Finally, we bought the printer, and I can write my own feedback for other users.
It's a great printer, fast and with an high print quality.
It's fully compatible with Mac OS 10.5, using the driver found at hp web site (the ones on the cd are older).
Matteo

How does Oracle failsafe work with dataguard

Question: Till now we used two nodes with failsafe and a database server.
We need a solution for the following:
* location 1: the same as above.
* location 2: database server(standby) and maybe another instance(node).
Scenario: The production database at location 1 fails and needs to failover(dataguard?) to the standby db at location 2. The failsafe instances at location 1 still point to the production database(which is down).
Does dataguard point the failsafe instances to location 2. Is there maybe a better solution stategy(keep in mind the costs)?
Or do we need RAC configured with dataguard?
Thanx,
Pim

I was able to run a simple query with ora_* functions using 10g on Windows.
The Oracle OCI calls used by PHP's ora extension still exist in the Oracle 10g libraries
But I cannot recommend this obsolete extension.
-- cj

How does order by work with rownum

Oracle Ver: 11g
Hello All,
I have 2 cases here, one with outer order by and one without outer order by.
I do not see any difference in the outputs for now.
Case 1:
/* Formatted on 4/30/2013 2:12:28 PM (QP5 v5.240.12305.39446) */
SELECT *
FROM ( SELECT ROWNUM rn, id
            FROM (SELECT 9 AS id FROM DUAL
                  UNION ALL
                  SELECT 1 FROM DUAL
                  UNION ALL
                  SELECT 14 FROM DUAL
                  UNION ALL
                  SELECT 7 FROM DUAL
                  UNION ALL
                  SELECT 5 FROM DUAL
                  UNION ALL
                  SELECT 6 FROM DUAL
                  UNION ALL
                  SELECT 13 FROM DUAL
                  UNION ALL
                  SELECT 8 FROM DUAL
                  UNION ALL
                  SELECT 2 FROM DUAL
                  UNION ALL
                  SELECT 4 FROM DUAL
                  UNION ALL
                  SELECT 19 FROM DUAL
                  UNION ALL
                  SELECT 3 FROM DUAL)
        ORDER BY id)
WHERE rn BETWEEN 1 AND 6;
Case 2:
I have added order by for outer clause in this case
But I would like to make sure if I really need to have the order by for outer query here.
/* Formatted on 4/30/2013 2:12:28 PM (QP5 v5.240.12305.39446) */
SELECT *
FROM ( SELECT ROWNUM rn, id
            FROM (SELECT 9 AS id FROM DUAL
                  UNION ALL
                  SELECT 1 FROM DUAL
                  UNION ALL
                  SELECT 14 FROM DUAL
                  UNION ALL
                  SELECT 7 FROM DUAL
                  UNION ALL
                  SELECT 5 FROM DUAL
                  UNION ALL
                  SELECT 6 FROM DUAL
                  UNION ALL
                  SELECT 13 FROM DUAL
                  UNION ALL
                  SELECT 8 FROM DUAL
                  UNION ALL
                  SELECT 2 FROM DUAL
                  UNION ALL
                  SELECT 4 FROM DUAL
                  UNION ALL
                  SELECT 19 FROM DUAL
                  UNION ALL
                  SELECT 3 FROM DUAL)
        ORDER BY id)
WHERE rn BETWEEN 1 AND 6;
ORDER BY id;Thanks
Shank.

Hi, Shank,
SamFisher wrote:
... I do not see any difference in the outputs for now. You may not, but you can't be sure that you will never see a difference. There may be a difference if you change versions, or if you add more data, or for no apparant reason.
If there's an ORDER BY clause in the main query (as in query 2) then the output is guaranteed to be in that order.
If there is no ORDER BY clause in the main query (as in query 1), then there's no guarantee that the rows will be in any particular order. If Oracle finds it convenient to display the rows in order by one of the columns (for example, rn) then it will do so. You can not count on it always doing the same thing unless there's an ORDER BY clause.
You should check out the analytic ROW_NUMBER fucntion. It's much more useful, and easier to understand, than ROWNUM. (In this particular example, it might not be any simpler, though.)

How does cc teams work with upgrades (CS3+)?

Similar Messages

Maybe you are looking for