How does compliance settings go from the client to the site server

I understand how to create baselines, how to view compliance on the client, and after some time later, the client's status shows up in the console. My question is what mechanism does compliance settings use to send the report to the management point? 
When you deploy compliance settings, there is a schedule for evaluation, I am guess some short time after evaluation, the results are sent, but where is that schedule and how do you force a sending of the evaluation?

It's state-message based.  Presuming you haven't changed the defaults, that's every 15 minutes out of the box, that a client will send any pending state messages.
There's probably a mechanism for forcing a single client to send any pending state messages, but honestly I usually just get a cuppa coffee and wait.  (I've learned to be patient with ConfigMgr).
Standardize. Simplify. Automate.

Similar Messages

  • How does Adobe ExportPDF differ from the export feature in Adobe Acrobat Pro 9.0?

    How does Adobe ExportPDF differ from the export feature in Adobe Acrobat Pro 9.0?

    ExportPDF is based on a newer conversion engine than the one found in Acrobat 9.0.  They're similar in some respects, but ExportPDF is more advanced.
    -David

  • Can you change the "System Installation Account" from the Site Server Computer Account to a Service Account after the DP is configured?

    When the distribution points were configured, we used the Site Server Computer Account.  
    Now we would like to change to a service account and remove the site server computer account from the local administrators group (and add the the service account).
    Can someone provide some guidance on if this is possible, and what steps should be taken to accomplish?
    Thanks

    Sure, just modify the properties of the "Site System" role in the console (in the Administration workspace under Site Configuration -> Server and Site System Roles).
    Why would you do this though? It's less secure and adds an administrative burden.
    Jason | http://blog.configmgrftw.com

  • Link posted on Facebook does not import Photo from the site

    When I paste a link to a status line on Facebook, it imports the title and annotation of the page correctly. However, the Facebook does not show any photo from the page (as it does with other websites).
    Is there a way to force Facebook to show a photo alongside the title etc?
    I am trying to post for instance this: http://www.cykasy.cz/Atlas/Cycas_xipholepis.html
    and would like to show some of the pictures on Facebook too.

    It seems that the only solution is to write a piece of code into the header of the page and that will tell facebook where to pull the title, description and the photo from. The code that needs to be inserted is below.
    THE PROBLEM - this solution doesn't work if you have built your site using iweb. Everyone that has iweb has responded to the solution (everywhere this is written about) has said this.
    Does anyone know another work around?
    The solution for anyone without iweb:
    <meta name="title" content="INSERT CONTENT HERE" />
    <meta name="description" content="INSERT CONTENT HERE" />
    <link rel="image_src" href="INSERT LOCATION OF PHOTO WEB ADDRESS HERE" />

  • Mail Adaptor : How to extract particular Mail from the mail server?

    Hi @,
    I have a requirement where I need to extract all the new mails with a aprticular Subject line to the XI and then forward it to the receiveing system.My problem is that the actual payload is situated in the Mail attachment which I will use in my scenarion but the filtering has to happen based upon the mail subject.
    I am not able to deal as the filtering and usage of payload are diffrent,need help in this regard
    Regards

    Hi
    As far as i know Mail adapter wouldnt be able to do anything of this sort.It will read all mails which it has never read before.You should use the mail Server for this.
    Thanks

  • How does we store messageId from the caller.

    Hi,
    I have service call pattern like : A->B->C->D->E->F->A . The second call to A from F should be for the same instance of A that called B initially. Normally we achieve this using correlations in SOA 11g Bpel. (Where B,C,E,F services are OSB Proxy/Business request/response Services and D is a external decision service.)
    I know that we can copy the soap header variable's contents(like replyTo) from initial call A till all way to D. How can we copy the message Id ?
    I tried doing <wsa:MessageId>$header/wsa:MessageId</MessageId> while routing from B(proxy) to C(business svc) where $header is soap header of A's initial call.
    But the problem is $header/wsa:MessageId is just being considered the the text "$header/wsa:MessageId" and not actually returning their value.
    Appreciate if someone call help me here.
    Thanks and Regards,
    Sri.

    Posted the question in SOA Suite forum. Sorry for spamming here . I am not sure how to move the thread.

  • How to select all files from the application server.

    Hi all,
    I have  a requirement to select all files with the same file format I.e i have created no of files with same name but different time stamps addition , now i want to select all the fiels and read the data into an internal table and sort them on the user requirement,  I am using FM -
    /SAPDMC/LSM_F4_SERVER_FILE to get single file name, i should also give the option on the  selection screen for the user to select the file range I.e form which to which the sorting should be done.
    could anybody suggest me the function module which selects all the file names .
    Regards,
    Sre.
    Edited by: Alvaro Tejada Galindo on Mar 10, 2008 4:49 PM

    Hi,
    PARAMETER: p_fdir type pfeflnamel DEFAULT '/usr/sap/tmp'.
    data: begin of it_filedir occurs 10.
    include structure salfldir.
    data: end of it_filedir.
    *START-OF-SELECTION
    START-OF-SELECTION.
    Get Current Directory Listing for OUT Dir
    call function 'RZL_READ_DIR_LOCAL'
    exporting
    name = p_fdir
    tables
    file_tbl = it_filedir.
    List of files are contained within table it_filedir
    loop at it_filedir.
    write: / it_filedir-NAME.
    endloop.
    Regards,
    Omkaram.

  • TS1702 How does one get rid of the stocks from Yahoo Finance on the notifications pull down bar on iPhone 5?

    How does one get rid of the stocks from Yahoo Finance on the notifications pull down bar on iPhone 5?

    If you mean you don't want to see the stocks at all in notification center go to Settings>Stock Widget and turn Notification Center to Off.  If you mean you want to remove some of the individual stocks shown, open the Stocks app, tap the "i " on the bottom right, tap next to the stocks you want to remove, then tap Done.

  • How can I get Data from the Sound cart in Labview? Does a VI exist?

    How can I get Data from the Sound cart in Labview? Does a VI exist?

    Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
    Khalid

  • HT2500 Does anyone know how to remove a group from the address panel in mail?

    Does anyone know how to remove a group from the address panel in mail?

    I haven't seen too many questions like this on this forum.  Did you also try the photoshop forums?

  • HT201270 In layman terms, what the heck does updating your carrier settings mean and how does it effect me in the real world?

    In Layman terms, what the heck does updating your carrier settings mean, and how does it effect me in the real world?

    No offense, but what carrier?  what data and what service? 
    I get a bogus window hovering in my itunes page, telling me I have to update information, that I don't want to manage. 
    I am not upset or unappreciative of your feedback, quite the opposite, I can't believe anyone actually monitors peoples frustrations. 
    I just want to make sure I don't allow information about me that is not necessary.  I just want to listen to music and have a phone and have an ipad. 
    Everything else about apple is way to propriatory. I don't want to do anything that isn't very simple. 
    Most importantly, there never seems to be any (human being) that can answer a telephone call anymore. 
    Contact us, means...send us an email about something you don't know anything about, and I don't even know that questions to ask.
    I am not allowed to be ignorant.  If I am I wait days for answers.....

  • How / When Does a Device Jump from the 2.4 GHz Network to the 5.0 GHz Network

    I understand -- through another thread that I started -- that the Guest Network will be both 2.4 GHz as well as 5.0 GHz....I would like to understand how / when does a device jump from the 2.4 GHz network to the 5.0 GHz network as I understand that: the 2.4 GHz network is slower but has greater range relative to the 5.0 GHz network.
    Thx...

    Bob Timmons wrote:
    A device will connect to either the 5 GHz or 2.4 GHz band based on its own capabilities and distance in relation to the router.
    So, if you have a 5 GHz capable device that is in close proximity to the router, it will connect at 5 GHz.  If that device moves a few rooms away from the router, it will switch over to the 2.4 GHz band since that signal will be stronger....and likely faster at that location.
    Think of 5 GHz as a "same room" connection or "line-of-sight" deal. It might be OK through one wall....if it is thin.
    You do have an option to assign a separate name to the 5 GHz band in AirPort Utility. Once you have done that, simply "point" the device at the network with the 5 GHz name. Some users swear by this and some swear at this.
    The downside to doing this......the device will likely try to hang on to the 5 GHz connection if it moves a few rooms away from the router.....at a location where the 2.4 GHz signal is stronger and likely faster.
    Again, thanks for the very helpful response.
    It occurs to me from reading the above that it makes sense to let the device (using your words) connect to either the 5 GHz or 2.4 GHz band based on its capabilities and distance in relation to the router as I can see / understand the downside and issue of manually pointing to or selecting  a specific network.
    The reason that I purchased an Apple router is the hope that it will work better than some of the other routers I have tried as far as the 5 GHz / 2.4 GHz dual banding is concerned because in most of these cases I have had to disable the 5 GHz band to maintain a reliable internet connection...hopefully the Aiport Extreme will not require me to do so [i.e. it will work]!
    With respect to *BOTH* the Primary Network and the Guest Network being dual band I can only conclude that this work because there are essentially two separates networks [i.e. 10.o.x.x and 172.16.x.x] that are using the send / receive configuration capabilities.
    Thx...

  • When setting up sync how does sync manage information from two computers? Does it merge the information?

    When setting up sync how does sync manage information from two computers? Does it merge the information?

    Hi!
    Yes, the way Sync works is that it puts all the Bookmarks together and pushes them to all your devices. Same with History.
    You will not loose any information in any of your computers.

  • When I delete a name from the address book it does not delete it from the drop down name menu when forwarding a message. How do I remove it from the drop down menu?

    When I delete a name from Address Book it is not removed from the name drop down list when forwarding a message. How can I remove it from the drop down list?

    In Mail go to the Window Menu and select Previous Recipients. Deleting entries from there won't delete them from your Address Book.

  • How does one go about getting the Kit Kat upgrade?

    I've searched the Verizon site ad I can't find how to download it.  Must one be selected?

    Thanks for your reply.  I went to Settings and About Phone, however, there was a "System updates"  that showed a history and a "Check for new software update" key.  I tried that and it returned with Your phone is up to date.  I guess I'll have to wait for Verizon to send me an update.
           From: clydefrog4963 <[email protected]>
    To: John Manning <[email protected]>
    Sent: Sunday, December 7, 2014 5:20 PM
    Subject:  - How does one go about getting the Kit Kat upgrade?
    #yiv6222900142 img
    |  
    |
      | 
    A message from the Verizon Wireless Community
      |
    |   |
    How does one go about getting the Kit Kat upgrade?
    created by clydefrog4963 in Samsung Galaxy Note 3 - View the full discussionVerizon has started pushing the 4.4.4 KitKat update on the Note 3, I got mine today. It poppped up when connected to my computer on Kies but you can do it on your phone by going to settings, all the way to "about phone" at the bottom, then click on "software update." Its best to do this while connected to wifi, and make sure your phone is at least half charged. Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community Start a new discussion in Samsung Galaxy Note 3 by email or at Verizon Wireless Community
    | 
    | 
    © 2014 Verizon Wireless
    Verizon Wireless
    One Verizon Way
    Mail Code: 180WVB
    Basking Ridge, NJ 07920
    Not interested in these emails anymore, or want to change how often they come? Update your email preferences by visiting https://community.verizonwireless.com/user-preferences!input.jspa.
      |
    We respect your privacy. Please review our privacy policy for more information
    about click activity with Verizon Wireless and links included in this email.
      |
    | 
    |

Maybe you are looking for