How does everyone manage Email Distribution Lists in E-Business Suite

We have heaps of email distribution lists stored in Oracle Ebusiness Suite, excel, access ..you name it!
I would like to use a standard method for tagging contacts in the CRM Sales and Marketing Online so our employees can run reports to create external mailing lists.
Today we use classification codes to do this. Have also thought about using a descriptive flex field and report on that to create a contact list with name and email addresses.
Anybody have a better idea for how to achieve this in Oracle Marketing/Sales Online?
Ideally, we would like to create a customer facing website so people could subscribe/unsubscribe from email lists and have it fully integrated 'plugged in' to the above solution.

Thanks Ravi for your response.
No, no such kind of reasons.
Indeed I can send successfully to a simple email address but not to the distribution list ...
The problem is right there, in the fact that there is a ditribution list but I really don't know what's the problem ...
Have you ever use a distribution list? Any special thing to do with it?
A'll appreciate any help.
Regards

Similar Messages

How can I create email distribution lists in my contacts on my macbook air?

How can I create email distribution lists in my contacts on my macbook air? I could do this on a pc using outlook, but I don't see how to do it on my new mac.

UPDATE, ok, I figured out how to make a list, but how can I remove specific contacts from the list? The "Remove from Group" is greyed out & not available.

How to create an email distribution list?

How do you create an email distribution list

This is what I do and it works!
1. Create a new contact in iCloud (iCloud.com) or from your iPhone or iPad.
2. The company name field is your distribution name.
3. In one email field type in or paste in all the email addresses you want in the format as listed below. That's open double quotes follow by person's name close double quotes. Open greater than sign e-mail close greater then sign. Each additional entry follow by a comma. Last entry you don't need to.
"first lastName"<[email protected]>,
I would suggest do this in Note (on the iPad) or somewhere you can see your entres. Then paste them to the email field.
Good luck! Hope this helps.
Tuan
Long Beach CA

How Do I Manage "Group"/"Distribution List" Members?

I downloaded iCloud recently to my android smart phone. I use Outlook 2007 as my mail program. When I"m on my pc (MS 8.1) & check my contacts, I find my "distribution lists"/'Groups" in a new list on the left side, but I cannot open these "lists/groups" therefore, I cannot manage membership on them. The "groups" won't open to show me who the members are.
How do I solve this question?

In Contacts, you can create Groups, of course. First and best, make the Groups visible (Command-1, or click View in the menu bar, then Groups).
You add contacts to Groups per simple drag and drop. You delete contacts from Groups by pressing backspace, or delete (if you have the extended keyboard), or -> Edit -> Remove From Group.

How do I bring up groups in Address book. I manage a distribution list but can't bring it up in my address book?

I manage a email distribution list. Usually, I drag the group to the address bar then expand the group for group emails. I have 160 prople in this group.
I lead a group of bicycle riders on weekly rides. I add or subtract email addresses to this group weekly.
When I go to address book,I can only see individual names or my contact list.
Please help?

I can get to Groups by clicking the red ribbon at the top that has a silhouette of 2 people or by using the option on the View menu:
Regards,
Colin R.

How do you setup an email distribution list on an iPad?

How do you setup an email distribution list on an ipad?

Although you could create a contact group with your distribution list on icloud.com, you couldn't select the group to email to. To email a group of contacts (as well as create contact groups) you would need to use an app like Speed Names.

How to set up text distribution list

I found out how to set up an email distribution list without buying an app but now I need to know how to do the same with sending texts, without buying an app and by associating a contact to it. I don't want to send a group text and only access that group by pulling up the text screen. All I want to do is assign a few numbers to a group name and use that group name to send a next message to the recipients. Any ideas?

Since a phone number field in Contacts does not have the ability to delineate between numbers, probably not. Theoretically, I suppose it could work if applied for recipients getting iMessages AND using email as the receive address, but hard to say. But for SMS texting, no.

Email distribution list in mail adaptor

Hi,
I am using mail adaptor / mail map to send email notificaiton, it works fine for single email id or multiple but not working for email distribution list which starts with "#". Is there any configuration required?
Thanks,
Menaga

Hi Menaga,
Distrubutor mail id is like simillar to normal mail id, but internally it contains the number of mail ids.
Ask your network team to create the distributed mail id (in this mail id how many mail ids you want you can put that mail ids).
and configure that distributed mail id like you configure in the normal mail id.
Regards
Ramesh.

BlackBerry Z10 - Address Book SMS/Email Distribution List

Will the BlackBerry Z10/Q10 have available the Address Book SMS and Email Distribution List's feature as it did with its predecessors? This feature is built into the Address Book and does not sync with Outlook.

I can't believe there is no distribution list on the new blackberry 10 system. I use distribution lists every day. This may be a deal breaker for this phone. Why not support something so simple?

How do i make email mailing lists in Mail or in My Address Book?

How do i make email mailing lists in Mail or in My Address Book?

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

How does one manage these new render setting for previews?

I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video. Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor?


Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
“As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
·        The "Watchout" playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
·        The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
·        If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
Thanks for your help!

How does Media Manager handle Motion Projects within the Sequence being cop

How does Media Manager handle Motion Projects within the Sequence being copied?
I've highlighted my sequence, opened Media Manager, and copied it to another drive. When I open up the sequence in it's new project, the rendered Motion Project plays within my sequence but it won't let me go back into this Motion Project to make changes. I tried starting over. This time I highlighted the actual motion sequence and clip that is created within FCP after sending something to Motion and copied those to the new drive. When I went into the newly created 'media' folder and double clicked on the motion project it launched. It looked liked it was going to play but while my crops moves and borders were there, the filmed material is shown as a freeze frame for the duration of the motion project.
I did this with and without 'including master clips within selection'. Any advice would be appreciated. Thanks.

Is there anyone who knows the answer to this? Thanks.

My mac is substituting commas for semicolons in my email distribution lists, any ideas?

My Mac is substituting commas for the semicolons in my email distribution lists, anyone have any suggestions?

It sounds like your hard disk is not accessible, I would first you need to start your iMac with the system DVD that came with your system, then format the hard drive with disk utility, then install the Mac OS X on to your newly formatted drive.

I give up Mainstage is useless how does everyone else feel?

I'm a working musician and have been using Logic for over 3 years for live performance. Imagine the joy I had last September when I learned that Mainstage was available. I was the first in my town to purchase the upgrade to Logic 8, I quickly installed it, read the manual, did some configuring hoping that mainstage would be the answer I had been waiting for for years.
Well initially I was impressed. There were some problems but I knew Apple would be right on them and a solution would be at hand shortly.
I upgraded to Leopard, had more problems, downloaded all the updates, prokits, etc. etc. had more problems! Called Support, subscribed to all the boards......yada yada yada
Took my Macbook Pro into my dealer got it checked, added more ram, even added a larger internal drive to fit all of Logic 8 on. Bought a cooling desk. Wrote and Apple Script, +*nothing helped*+
It just seemed to get worse
Finally yesterday I had a spare 5 hours so I stripped Leopard off reinstalled Tiger, Logic Studio and the rest of my stuff from scratch believing that the problem was Leopard related, even that didn't work. Mainstage still clicked, popped, puked ..................... pick an adjective.
I've been a loyal Apple customer since 1980 (I had an Apple II Plus) I currently own 3 Macs. I am really disappointed in the support this product has seen from Apple. The loss of faith in this product is apparent by the drop off in messages on all the discussion boards and this is a dangerous thing to a company I believed put it's customers first.
I have decided to give up on Mainstage I will go back to using my synths to play gigs. I feel I have come to the table to try and get Mainstage running unfortunately Apple hasn't
How does everyone else feel............... If there are any of you left out ther
JN

JN
I have voiced my opinion about MainStage since the beginning, thinking that maybe Apple or people who have access to the MainStage developers, would read the posts here and try and get some of these issues resolved.
MainStage is a great program conceptually. Compared to a lot of similar hosting programs out there, it has some nice implementation ideas such as sounds gradually fading out during patch changes so that reverb tails aren't cut off, extensive keyboard splits / layers, etc. and a pretty cool on screen layout for nice feedback during a live gig. There are some things that I wish Apple would have put in the program, like the ability to control external midi hardware.
However, in spite of these great ideas and thoughts, the developers, in my opinion, didn't make sure the program was rock solid as it should be for a live application. If this were a program that you could use and be able to do retakes, make corrections along the way, etc., then these bugs would be accounted for by the user and dealt with. But for a live app, when you are playing in the middle of a song, where you only get one chance to make it right, and the application locks, pops, clicks, etc. in a sporadic and unpredictable fashion, it is absolutely unacceptable.
I agree, most of the people who posted here back in the beginning have stopped because it didn't seem to make any difference. And there is usually a few users who have perfect systems. I have tried various ways to eliminate the unpredictable nature of MainStage but no such luck. Even last night at rehearsal, everthing seemed to be going along fine through the four first songs. I only had about 7 or 8 patches total and my memory usage was at about 30%. Then I change patches so we can start working on song #5. For this song I use a Native Instruments B4 patch (which also was one of two patches used in the previous song I just played). I have used this instrument many times and it has performed very well for the most part except for the occasional CPU spikes. I got about 2/3 of the way through the song and then noticed something ... I had no more sound coming from my instrument. I looked over at my MacBook and to my dismay, it was totally locked up. Needless to say, I wasn't able to finish the song because I had to reboot my machine. I know others may chime in here and ask if I had this configured or that ... and yes I have done all of these ad naseum ... this machine is soley devoted to my music rig, so its not like I am using it for games, word processing and everthing else. The bottom line is, this is another example of how quality control for this app and maybe Leopard in general has gone out the window.
I really like MainStage, I have invested a lot of time setting things up to replace my Logic live rig and have tried to hang in there hoping help would be on the way. I am not even asking for the ability to control external midi equipment (though that would be nice), I would just like to have a dependable piece of software that is made for live use, not just a toy to jam with friends in the Garage.

When setting up sync how does sync manage information from two computers? Does it merge the information?

When setting up sync how does sync manage information from two computers? Does it merge the information?

Hi!
Yes, the way Sync works is that it puts all the Bookmarks together and pushes them to all your devices. Same with History.
You will not loose any information in any of your computers.

How does everyone manage Email Distribution Lists in E-Business Suite

Similar Messages

Maybe you are looking for