How does failover and load distribution work in Operations Manager resource pools?

Hello everyone,
I have a couple of questions in regard to failover and load distribution in resource pools.
What is the criteria for an x-plat or network device to initiate a failover?
How is load distributed in a resource pool - Is it round-robin, performance based or something completely different?
In case more than two management servers are in the same pool, and a management server becomes unavailable, how is load distributed among the remaining resource pool members?
Any help is appreciated.
Thx,
Claus

Hi,
Resource Pools are a collection of Health Services working together to manage instances assigned to the pool.
Workflows targeted to the instances are loaded by the Health Service in the Resource Pool that ends up managing that instance.
If one of the Health Services in the Resource pool were to fail, the other Health Services in the pool will pick up the work that the failed member was running.
And I would like to share this article with you. Hope it helps.
http://www.systemcentercentral.com/how-does-the-failover-process-work-in-opsmgr-2012-scom-sysctr/
Niki Han
TechNet Community Support

Similar Messages

How does idx and sub files work?

How can I get idx and sub files to work on quicktime and apple tv? I have a mp4 movie with those subtitle files and wonder how they work.
Message was edited by: elangsru

Go to ine.com and sign up for a free membership. They offer free streaming of the CCNA R/S and CCNA Voice videos. You can also use Google to find many resources to read on.

How does VLAN and Data circuits work?

I'm new to VOIP and wanted to know if there's any free training documents to read? Thanks

Go to ine.com and sign up for a free membership. They offer free streaming of the CCNA R/S and CCNA Voice videos. You can also use Google to find many resources to read on.

How does mix and match works in ECC6.0?

How does mix and match works in ECC 6.0?
Can some shared on this topic?
Thanks in advance

It;s a term used in Retail for combination of sales item eg buy 3 get 1 any other @ xx price.

I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ???

I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ??? I have a great dell computer, Dimention 8400. Before I install firefox I want to know for no waste of time for either party..

Unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
If it was never registered to your account then it won't appear on your support profile : https://supportprofile.apple.com/
The only other ways to find it that I know of (apart from on the actual device) are via the packaging, the backup on a computer's iTunes : http://support.apple.com/kb/HT4061

How does my site load?

As the title asks, how does my site load? Here's a link: http://www.mkstudios.comxa.com/MK_Studios/Home.html. Some people have said that each time a tab is selected, the images are what slows it down. It's pretty fast on my connection, but I know other people not have the same speed as me. Like when I'm at work for example, it's not as fast here. What are your takes on it?

Bonjour,
The two images are PNG ([170 ko|http://www.mkstudios.comxa.com/MKStudios/Home_files/shapeimage1.png] and [90 ko|http://www.mkstudios.comxa.com/MKStudios/Home_files/shapeimage2.png]) because they are masked images (shapeimage).
A trick :
Drag and drop these two PNG ([170 ko|http://www.mkstudios.comxa.com/MKStudios/Home_files/shapeimage1.png] and [90 ko|http://www.mkstudios.comxa.com/MKStudios/Home_files/shapeimage2.png]) into your iWeb page
Remove the originals
Don't use mask or unmask the PNG images (important!)
!http://i32.servimg.com/u/f32/09/02/44/99/unmask10.jpg!
Publish
Visit your site, refresh the page : now the 2 images are JPG (about _37 ko_ and 15ko ).

How does SMB 3 Multipath actualy work?

First of all, sorry if there is a better form to post this in, I didn't see a general networking or SMB forum.
I've been trying to find anything about how SMB 3 Multipath actually works at a networking level (OSI Layer 2, Layer 3). I can't find anything that actually talks about how it achieves multipathing once it's out of its exit interface. Even how it actually chooses
potential exit interfaces is still a mystery to me.
How does the MAC address forwarding work? Does it somehow dynamically learn the available MACs on the destination and split the load between them? If that's the case does it work over layer 3 subnets if there are two available routes? How does it learn about
multiple available paths and actually get the network equipment to use them? In other words if Server A and B have 4 NICs they have 4 MAC addresses or more, one or more IP addresses, teamed or not teamed. Layer 2 adjacency vs Layer 3. There are a lot of variables
that it has to work with. Is DNS involved at all? If my connection attempt is the server.domain.local DNS might have more than one IP address that server is reachable from but if I connect to 192.168.1.1 then I'm specifying an IP and DNS doesn't come into
play, does that affect SMB 3 Multipath?
I know SMB 3 works when in a team and not in a team, I've tried it. But if it is in an LACP team then once it leaves the server NIC it's up to the switch to forward that to the destination based on the hash, for a single flow in normal situations the switch
would pick the same interface but I get increased bandwidth so I know the switch is sending to both interfaces, so I assume there are multiple flows. That means something about the flows has to be different, I assume the destination MACs, but I haven't put
a packet capture to look...yet...
Does anyone know of any papers or details that talk about these issues they can point me to? Every blog post or video I've seen is super generic about how it actually works. It's not magic.

Hi,
With Multichannel, SMB will create multiple TCP/IP connections for that single session (at least one per interface or more if they are RSS-capable). This allows SMB to use
the combined NIC bandwidth available and makes it possible for the SMB client to continue to work uninterrupted if a NIC fails.
Although a team always provides fault tolerance, SMB without Multichannel will create only one TCP/IP connection per team, leading to limitations in both the number of CPU
cores engaged and the use of the full team bandwidth.
The related article:
The basics of SMB Multichannel, a feature of Windows Server 2012 and SMB 3.0
http://blogs.technet.com/b/josebda/archive/2012/06/28/the-basics-of-smb-multichannel-a-feature-of-windows-server-2012-and-smb-3-0.aspx
More information:
How much traffic needs to pass between the SMB Client and Server before Multichannel actually starts?
http://blogs.technet.com/b/josebda/archive/2013/01/18/how-much-traffic-needs-to-pass-between-the-smb-client-and-server-before-multichannel-actually-starts.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How does Creative Cloud for teams work with staff who work in two locations ie in the office/home

How does Creative Cloud from teams work with staff who work in two locations i.e. in the office and home?

There is no difference please be aware that each login is provided with two activations however. If you wish to have a computer at both work and home activated though that is perfectly fine as long as your employer is ok with using company software at home.

How does the DAQmx read.vi work in producer/consumer mode

Dear all,
I have one question: how does the DAQmx read.vi work in producer/consumer mode ?
I mean if i set the acquisition samples quantity is 5000,(see the enclosed picture), how does the DAQmx read.vi acquire the samples ?
5000 samples one time ?
And how does the write. vi work ? Also 5000 samples one time ?
Look forward to your reply.
Thank you.
Attachments:
producer consumer mode.png ‏28 KB

It will read 5000 samples per channel.
The Write Measurement File just writes whatever you give it. It you send it 5000 data points, it will write the 5000 data points.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How does the Mac App Store work?!

Hey guys i recently posted this quesiton in a different area of the community but instead of being helped was just ridiculed for posting in the wrong place... +1 for helpfulness guys :/ lol Anyways... ive been told to ask in the development section.. I have a $9.99 app and it was sitting at 10th place in the top grossing apps a few weeks ago on the UK app store, now I noticed in the morning that it was ahead of an app which was 49.99 so i presumed that I must have sold at least 5 or 6 to be ahead of him (my idea of top grossing is quantity x price) but when itunesconnect released their reports in the afternoon it turned out that i'd only sold 1 copy.. so what im asking is basically how does the top grossing section work? and how regularly does it update? is it live? daily? etc
Thanks in advance!

Your rank is better than the other app because you've made a sale while they've made none. When you make a sale, you jump in the charts, and after that you slowly go down if you don't make another sale. In other words, the bottom of the charts has many apps that didn't make any sale recently. I've also noticed that if you make some sales in other countries than the current chart, that'll very slightly improve your rank.

How does EXIT modules in DMEE work?

Dear friends, how does EXIT modules in DMEE work?
If I want to use this module DMEE_EXIT_DK_OCR_ACCOUNTNO to extract the account number of an OCR line, what should I do?
And especially what do I put in the import parameters?
/René

The module called DMEE_EXIT_DK_OCR_ACCOUNTNO is a dummy module or template module if you like.
The problem is that the module DMEE_EXIT_DK_OCR_ACCOUNTNO has a condition that never where fulfilled!
I copied the module to Z_DMEE_EXIT_DK_OCR_ACCOUNTNO and changed the conditions u2013 and then everything was working with import and export parameters!
Either is DMEE_EXIT_DK_OCR_ACCOUNTNO a serious mistake in standard SAP or just an undocumented template to be modified!
/René

Does HDR and camera flash work on ipad 2 with ios 7?

Does HDR and camera flash work on ipad 2 with ios 7? I can't see these options.

iPads do not have flash.
How exactly would ios 7 add hardware to the device?

How does the widgets HTML snippet work on iweb?

How does the widgets HTML nippet work on Iweb? and when should you use it?

Joe R wrote:
I'm creating Tool Tip definitions for the Operators in the Filter on the Interactive Reports. I was looking for a definition for the 'Contains' operator and from what I've found this operator is used to do a text search and it returns a relevance score for every row selected.The IR "Contains" filter is not the same as the Oracle Text <tt>contains</tt> operator.
The IR "Contains" filter performs a simple string comparison on all of the column values returned. It does not make use of any Oracle Text indexes on the underlying data.
Despite < a href="https://forums.oracle.com/forums/thread.jspa?messageID=2434666">vague promises of enhancement</a>, no Oracle Text support has yet been included in Interactive Reports.

GRC - Role Expert v5.2: how does the Transaction Usage functionality work

Hi All,
re: GRC - Role Expert v5.2: how does the Transaction Usage functionality work
We are implementing GRC suite v5.2, but specifically my question is regarding Role Expert:
SAP documentation states that it is possible to use Role Expert to do the following: for roles allows you to see if, or how much, a transaction is being used, when it was last used, and who used it.
My question is how without Audit Log or RBE?
Let me know if you have ever used this functionality and if it requires the SAP Back-End Audit Log to be turned on or RBE.
Thanks in advance!

Hi Gary,
You dont need a RBE tool activation to get the successful transaction usage log with Role Expert.
Role Expert functionality allows you to log all the transactions that have been added/deleted to the role that is changed. Also when you create a new role via the Role Expert then automatically the transaction log starts.
If you go the "History" tab in the Role Expert, then you can find all the last changes made to the role.
Also you can go to the "Risk Analysis" tab to find the log of Risk Analysis performed with the added tcodes.
Hope this helps.
Thanks,
Kiran Kandepalli.

How does the shake to shuffle work on ipod touch 4g?

So, i want to know how does the shake to shuffle work, i opened the music player and started playing a song but when i shake the ipod, nothing happens, the option of shuffle on the screen is still white and when the song currently playing ends, the next one in alphabetical order starts. The shake to shuffle option in settings is On.

The iPod can only tether via Bluetooth for internet connectivity to an iPhone. It will connect to other phones to tether for internet connectivity if the phones can act like a wifi hotspot.

How does failover and load distribution work in Operations Manager resource pools?

Similar Messages

Maybe you are looking for