How does IDOC data transfer happensbetween two system?

Hi,
If there are data in system A and I need to transfer to system B using IDoc.
What are the key things which will enable data transfer from system A to system.
It would be great if someone can explain how does IDOC data gets transferred from system A to sytemB.
Regards,
Rachel
Moderator Message : Search for available information or Read SAP documentation. Thread locked
Edited by: Vinod Kumar on Apr 26, 2011 12:37 PM

thanks for all your replies...
let me write down what i have understood ..plz correct me if i have not followed properly..
1) Once IDocs successfully reach R3 , a function module specific to the Idoc type is called "<b>automatically</b>" and updates database...
2) this function module we specify in the process code while creating partner profiles
basically all we need to do is to specify correct function module, right?
the rest of the process ie . updation in the tables(database) is done automatically..
Once database is updated, where can i see the added/updated records in database?
also how do we find this function module?
I am using MATMAS05...
Regards,
Roshani

Similar Messages

I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton

ERec - Data Transfer from eRec system to HCM System

Hello All,
Currently am able to do the data transfer from eRec system to HCM system but am finding some inconsistencies here.
In our scenario we are on ehp4 and no XI in place, We are doing via RFC only. Stanalone eRec system
So here are few queries and if someone can address these would be really great and appreciate the help
1) While i do the data transfer activity, when i select activity and don not give the Hiring Date in the Org Assignment Column it throws an error "When transferring data using XI, the hiring date must be specified". But am not using XI, then why should it give this error?
Also is it not possible that i do the data transfer without any hiring date?
Also there are two options Planned and Completed. When i do the data transfer i keep it in planned status and do it it automatically saying that Complete
Is this correct
2)Now when i do the data transfer it is getting appeared in HR system when i execute the PA48 tcode.
Here my queries are
a) Suppose i do a data transfer for a candidate Abc on 10.10.2010 and run the PA48 tcode it appears in the list as hire date 10.10.2010
Now as a recruiter am again doing the data transfer for the same candidate Abc for 11.10.2010 and againg when i see PA48 there is again another entry for the Abc candidate for hiring
Is this correct process. How should these duplicate entries to be avoided. Pls help me
3) Also i case if I want additions infotypes to be transferred in PA48 how should we go for this development
Pls help me in these queries

Hi ,
Check the following OSS notes.
1. 1006679
2. 997181 ( Read the attachment in the OSS note ) gives the detailed information regarding EREC and HR)
Let me know if you need more info.
Regards,
Ram

IDOC Data transfer

Hi Experts,
I have few questions related to IDOC Data transfer. I have two different SAP Systems S1 and S2, S1 Creates sales order and send the data through IDOC Type ORDERS05 to S2, To create sales order in S1.
As i know, Program IDOC_INPUT_ORDERS is used for I/B IDocs in S2. Will be there be any programs to push the data from S1 System.
Thank you
Kris

hi,
idoc is not meant for sending files to another system, they are basically data containers which are sent to other systems like to send the data related to sales orders you can send idoc ORDERS.
you need to first be clear with the requirement for which business object you want to transfer the data, then need to look out if the Idoc is available for the same then only u can sent it.
for more info on idocs you can easily search on forums.
Reg,
NJ

How does IDoc update database in R3

hello friends,
i have a doubt in MDM-XI-R3 scenario...
i have say successfully posted an IDoc in R/3 system...the status shown there is green...
now how does this data in this IDoc gets updated in the database?
can anyone clearly mention what happens after IDoc reaches R/3?
Regards,
Roshani

thanks for all your replies...
let me write down what i have understood ..plz correct me if i have not followed properly..
1) Once IDocs successfully reach R3 , a function module specific to the Idoc type is called "<b>automatically</b>" and updates database...
2) this function module we specify in the process code while creating partner profiles
basically all we need to do is to specify correct function module, right?
the rest of the process ie . updation in the tables(database) is done automatically..
Once database is updated, where can i see the added/updated records in database?
also how do we find this function module?
I am using MATMAS05...
Regards,
Roshani

Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller

Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?

Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How does committed date in STO- different company codes gets calculated

Dear All,
Please let us know How does committed date (ATP date) in the STO across different company codes gets calculated
Regards
Ahmad Idais

Hello,
RA is always a Company Code specific process due to the possibility of financial postings. I think that your WBS structure better be reconsidered not to mix up different Company codes at different levels, but maybe having a parallel nodes for different Company codes.
I also believe there is a consulting OSS note to explain the standard system behavior, just search the OSS.
Since you already have a master data in place it must be quite easy for you to test how the system behaves.
Regards,

IDOC data transfer SAP to Java using SAP JCo

Dear Experts,
The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
For this data transferred we are planning to use IDOC process and for interface "SAP Java connector" we are planning to use. In this case we are having some doubts.
1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
2. We are planning to install "SAP Jco" in Java server. Is this correct...??
3. Other than SAP Jco any other softwares needs to be installed or not..??
4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
If anybody has detailed steps or explanation please share it with us.
Warm Regards,
VEL

Hi All,
For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
Regards,
Velmurugan P

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

How to create data transfer and copying requirements

Hi Gurus,
Can you tell me how to create data transfer and copying requirements in copying control for SD?
Thanks,
pAUL

Hi John,
Go to Transaction code - VOFM.
In the menu select Data Transfer and select where you want maintain the copying requirements i.e. at the order level, delivery level etc.
Here, you can either create a new routine or change the existing routine according to your requirement.
Make sure you activate the routine (click on Edit - Activate from menu) once you are done with the routine.
REWARD POINTS IF HELPFUL
Regards
Sai

When setting up sync how does sync manage information from two computers? Does it merge the information?

When setting up sync how does sync manage information from two computers? Does it merge the information?

Hi!
Yes, the way Sync works is that it puts all the Bookmarks together and pushes them to all your devices. Same with History.
You will not loose any information in any of your computers.

How to manage data aggrigation from multiple systems.

Hi,
How to manage data aggrigaion from multiple system which should support paging too.
please suggest me , best possible soluntion.
Thank You

what is ment by aggrigation? what is the difference between Inheritance and aggrigation ? How can it implement as part of the programm

Regarding data transfer from SAP system to XI

Hi Experts,
I have a program in which a file of type XSTRING is sent to SAP Business Connector through a Function module. Now we want that file to be transferred to third party system through XI as interface instead of SAP BC.
Can anybody suggest what will be the required steps ?
Also please mention the required things to be done on ABAP part.
Thanks in adv.,
Akash

Hi Gordon,
We don't have the idoc creation part in our program so it will be better if we can use xstring file only.
Can you suggest any function modules for data transfer to XI ?
Thanks,
Akash

Comparing and Asjusting data b/w two systems using SCU0 Transaction

I need to compare and adjust data between two systems for tables T006 , T006A . I am using Transaction SCU0 for comparison . It is giving me comparison results , but coz of some reason Button for adjusting data is not active for me .
If I do the same thing using SM30 , Adjust button is coming after comparison . I don't have maintinance views available for these tables otherwise i would have used SM30 . I want to do that using SCU0 only . Any idea how can I make Adjust button active .
Regards

Hi,
Welcome to SDN !!!
I would suggest you to please contact your BASIS Team. They will Activate the button for you.
Thanks,
Chidanand

How to call data from backend ECC system in Gateway Hub System?

Hi Experts,
We have a scenario where the GR process has to be done on Mobile app. We have a SMP 3.0 and Netweaver gayeway deployed as Hub.
I really need quick pointers on how should we go about this?
My queries are mentioned below:
1.I don't see SAP data in Gateway system.So will we need to create RFCs in ECC and call them in Gateway system.
2. Will we need to install IW_BEP in backend system? Can someone explain its real purpose?
3. How do we do our data modelling? How do i define it if I don't have my SAP data structures in Gateway system.
Your guidance will really be appreciated.
Regards,
Saket.

Hi sanket,
Answering to your second question,
IW_BEP Component is used to handle the events and actions activated in the SAP system and to publish these events and actions through SAP NetWeaver Gateway.
The BEP functionality enables you to:
Obtain and publish Business Object Repository (BOR) events without writing code. For example events raised as a result of changes in a business object: because of changes in a sales inventory, an event is raised and published to SAP NetWeaver Gateway.
Obtain and send events for SAP Business Workflow, for example, an event is raised for a workflow user decision step.
Obtain and send events from your code, for example, events raised as a result of implemented customer code, such as BAdI implementations.
Read more about IW_BEP at:
Business Enablement Provisioning (IW_BEP)
https://help.sap.com/saphelp_gateway20sp08/helpdata/en/a2/15f0b42f2948f6bb9e51f98e8c39e9/content.htm
Development with IW_BEP in SAP Netweaver Gateway
https://help.sap.com/saphelp_gateway20sp05/helpdata/en/64/472d8e21a342ba9d83e403ff4cd9db/content.htm
Hub Odata Channel without IW_BEP
http://help.sap.com/saphelp_gateway20sp06/helpdata/en/32/5895449ac74783a3bd80a782c82f85/content.htm
Regards,
KK

How does IDOC data transfer happensbetween two system?

Similar Messages

Maybe you are looking for