How does iWeb track files for incremental updates to .mac

In short, my question is where does iWeb keep track of which pages have been published to .mac so it can make perform an incremental update?
My father is in Alaska using iWeb 1.1.1 to maintain a blog and photo gallery that, when published to .mac, has grown to just over 100MB. His connection speeds vary from port to port, but are typically around 128k and cut out after a bit of use. The challenge now is that iWeb is trying to upload the entire site which is failing every time due to the internet connection.
While visiting him, I saved an identical domain.site file to my computer that I would like to publish using my high speed connection. Following this, my goal is to convince his version of iWeb that it has been updated without having to transfer the entire domain.site file and this is the part where I could use some help.
So far I have published my copy of the site. I have then tried emailing him copies of the files: index.xml.gz, assets.site.plist, ServerCachedResources.plist, sharedassets.plist, and com.apple.iweb.plist which I accessed using the show package contents on the domain.site file. He has transfered these to domain file however it still wants to upload the entire site. Are there any other ideas on where iWeb tracks pages for incremental updates?
ibook g4 Mac OS X (10.4.6)

If your MBP has a line in jack, just plug an 1/8th inch stereo miniplugto whatever your cassette deck has and use garageband to record the song.

Similar Messages

How does the backup file that I would like to use for restore now require a password

How does the backup file that I would like to use for restore now require a password, when I just Backed it up on 10/30/14

It requires a password to restore from it because at some point, you checked the box in iTunes to use encrypted backups, at which point you were prompted for, and set a password.
If you now can't remember what that was, then you can not restore from that backup.

How does iWeb 08 compaire to RapidWeave or Sandvox?

How does iWeb 08 compaire to RapidWeave or Sandvox? I am very concerned about iWeb having to reload everything each time, sort of like MicroSoft Publisher producing website. I am also concerned how that effects your Google rankings by putting all new pages up and it looks like I would have to reinstall my Google Analytics every time I update my website? If you can also recommend any site for compairing the three products I woud appreciate it.
Big Thanks
Martin

Martin Brossman wrote:
How does iWeb 08 compaire to RapidWeave or Sandvox?
Martin — Sandvox is up to v.1.5, but you may find _these comments_ regarding Sandvox v.1.2.8 helpful. Also _these comments_ regarding RapidWeaver 4.

How to exort tracks files out of garageband

hello,
someone can says me how to export tracks files out of garage band for others music software likes reason logic or something else
For itunes that's easier but for others software i dont know how i can do that.
thanks for your answer.
response at this adress if u can please [email protected]

Just solo each track separately and export them. Be sure to rename the export track 1, 2, etc. or it'll get confusing as they'll all have the same name. The result will be several .aiff files that should work in any recording application.

How does playing track from a server mounted drive look to IT department

How does playing a file in iTunes that resides on a mounted server drive look to IT department. I'd like to play some tracks I saved on our Xserve. It is our (Marketing) server and I am the Admin, but I was curious how the traffic looks to IT. This server is attached to the company wide network but only Marketing has access. Will playing the file show up to IT as streaming audio or just appear as file activity?

It will just appear as file activity.

How does the track pad auto correct miss spelled words?

How does the Track Pad auto correct miss spelled words, unlike the mouse i can no longer double right click to change the spelling??

Hey hoopsmiller,
Thanks for the question. If I understand correctly, you want to turn off auto correct in OS X. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Since you have already tried to turn it off for all apps, you can try individually.
OS X Yosemite: Check spelling and grammar
For a specific app: In the app, choose Edit > Spelling and Grammar > Correct Spelling Automatically (it’s off when a checkmark isn’t shown).
Mac OS X 10.6: Checking spelling and grammar
If you don’t see the “Spelling and Grammar” command in the Edit menu, the application doesn’t provide the Mac OS X spell-checking feature. Check the application’s preferences or menus to see if it has its own spelling checker.
Thanks for using Apple Support Communities.
Have a good one,
Mario

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

How to create xpi file for my own extension?

I have created my own extension and directly added profile extension folder in my system.its working fine. but while installing extension using .xpi file its produce error "Install script not found
-204".Please explian me how to create .xpi file for my extension folder.
I hope you can help this issues.
Thanks in advance.
Regards
vasanthi

See this:
https://developer.mozilla.org/en/Building_an_Extension

How does one get points for articles

how does one get points for articles

You submit your article, it is reviewed by an SDN content manager and then published, about a week after you should see some points for your efforts. If not, contact [email protected]
Regards,
Rich Heilman

How to import WMV file for use in adobe programs, especially After Effects and/or Premier?

How to import WMV file for use in adobe programs, especially After Effects and/or Premier?

I have the latest adobe creative cloud and i'm using Mac 10.8.2
My client gave me a wmv file that she wants some people blurred out in the background but when I go to import the media, it's greyed out. I'm assuming that After Effects will be the best solution for this, but maybe there is another way.
I can purchase a video converter and convert it to .mov but that costs extra money that I don't want to spend just to do this one project.

I have a G5 and bought and upgraded to osx 10.5. now i need to upgrade to 10.5.6 or higher, but when i download and try to install, i get message "this volume does not meet requirements for this update".

i am trying to sync an ipad to a power mac g5. i bought and upgraded to osx 10.5 and have tried to download and 10.5.6 or higher, but i keep getting same message: "you cannot install mac os x update on this volume. this volume does not meet requirements for this update". help!

Mac OS X 10.5.8 Combo Update
Java for Mac OS X 10.5 Update 5
To me, in all such updates, goes without saying maybe: backup, repair permissions, repair your drive (Disk Warrior does more reliable and thorough job, and it comes out to pennies if you don't wait until needed). Clone your system so you can restore or use the backup - just in case.
I'd even do a fresh format after your clone is done and do a full OS clean install and update, and then a quick import from Setup Assistant.
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
I'm going to assume there is something with the partitions on the drive, partition table most likely, though I know I've seen others with that error message - doesn't really point to cause, rarely does (make sure latest firmware update etc is sometimes included but again, we know that isn't why).

How to make jar file for this compilation method ?

can any one tell me how to make jar file for this compilation
D:\java\browser\IEInJava>javac -classpath jdic.jar;. IEInJava.java
D:\java\browser\IEInJava>java -cp jdic.jar;. IEInJava
*this is a compile code:-*
D:\java\browser\IEInJava>javac -classpath jdic.jar;. IEInJava.java
*and this is a run code:-*
D:\java\browser\IEInJava>java -cp jdic.jar;. IEInJavanow how make JAR file ?

Assuming IEInJava only uses classes inside the jdic jar, this is one way. D:\java\browser\IEInJava> jar cf yourjar.jar IEInJava.classThen to run it you would use D:\java\browser\IEInJava> java -cp jdic.jar;yourjar.jar IEInJavaAnother way would use the jar manifest file to specify the Main-Class and Class-Path.

How does thw firm ware for the built in web cam on a pavilion G6 get reactivated or re-loaded?cc=US

how does the firm ware for the built in web cam on a pavilion G6 get reactivated or re-loaded? I have been attempting to get this done all day. I have downloaded new drivers from HP, used the recovery manager etc and nothing seems to work. I have owned this HP pavilion G6 for a couple of months and am already sick of the problems I am having. Windows 7 and HP; what a great team!

i m facing same problem.
dont know how HP!! can Cheat Customers in India??
i don't think they supply GOOD pieces to the 125 Million Country??!!

How to build ear files for ADF application using Ant task

How to build ear files for ADF applications using Ant. The ojdeploy ant task can not find application-level deployment profiles. I am trying to automated build and release for ADF application.
Any help is highly appreciated.
Thanks
Shiva

Hi Timo
Thanks for your reply.
I have successfully created ear file using ojdeploy on jenkins. however when am trying to auto deploy using WLDeploy ant task am getting the following
error :
weblogic.application.ModuleException: :oracle.mds.config.MDSConfigurationException:MDS-01335: namespace "/oracle/webcenter/quicklinks/scopedMD" mapped to metadata-store-usage "WebCenterFileMetadataStore" but its definition was not found in MDS configuration
Please advise how to handle this.
As am a newbie to ADF, could you please advise if it is possible for the ADF application deployments can be automated for different environments using jenkins due to this MDS dependencies.
Appreciate your help.
Thanks
Shiva

How does iWeb track files for incremental updates to .mac

Similar Messages

Maybe you are looking for