How does Leopard decide which Space to present at startup?

When starting up, Mac goes to Space 2. Would like it to go to Space 1. How does Mac decide which Space and how do I change it to Space 1? Thanks.

Do you have an app that is assigned to Space 2 that is also in Login Items (starts automatically upon login)?
If not... Maybe if you disabled Spaces, restarted at least once, and then enabled Spaces, it will go back to starting up on Space 1.
If you have an app that you always open in Space 1, assign it to Space 1 and also put it in Login Items.

Similar Messages

  • How does Mail decide which outgoing SMTP server to use?

    I have Mail setup with two accounts - one for home use and one for work.  Each has its own outgoing SMTP server.  My question: how does mail decide which outgoing server to use?  I don't want to mix work and home stuff.
    Specifically, what happens in these three scenarios?
    1) I compose a new mail.  Does it always use the first account's outgoing SMTP server or does Mail look at the recipient's domain and base its decision on that?
    2) I reply to a work email.  Is Mail smart enough to look at my domain or the sender's to know to use the work outgoing SMTP server?
    3) I reply to home email.  Is Mail smart enough to look at my domain or the sender's to know to use the home outgoing SMTP server?
    Any information is much appreciated.
    Tom

    Hi Juergen,
    Thanks for the suggestion - I had to "Customize" the viewable header to include the "From:" ("Von:") line to see who I was sending as.  As far as the "use this SMTP only" checkbox is concerned - they're checked on both my accounts - so I'm not sure how much of an impact that has.  To be honest, I thought this checkbox was meant to limit your outgoing mail (for that account) to this mail server only.  I thought that if it was not checked, Mail will try to send the mail via another SMTP server if the one for this account is not reachable.....after all, why else would Apple allow you to check both servers' "use this SMTP only" checkbox?
    But this is good enough for me - now I can see who i'ms ending as.
    Thanks,
    tom

  • When placing object from Illy, how does ID design which artboards to present

    Could someone walk me through placing objects into ID documents from an Illustrator file with multiple layers? Does it only present the artboards that are present in the topmost layer? Or is it all visible layers?

    After you select the artboard you want and place the file, you can change the layer visibility by selecting the object, right-clicking and choosing object layer options.

  • How does udev decide to load oss or alsa when boot up?

    Since Skottish has told me I do not need to blacklist alsa in MODULES in order to use oss.
    I assume that udev will choose oss rather than alsa to load when booting up, then I am wondering how does udev choose which one to load, alsa or oss?
    And suppose one day, I want to use alsa again, how can I make udev to choose alsa instead of oss?
    Also by the way, will there be any conflict to load both alsa and oss together?
    Thanks, guys.:)

    Ok, so udev actually look at what is DAEMON to decide what to load?
    I didn't know this.. I thought when boot up, udev will load alsa by default, then why did the OSS Wiki said we need to put !soundcore in MODULES to blacklist Alsa?
    Last edited by yingwuzhao (2009-03-15 22:58:59)

  • How does oracle know which AO Framework page or process to execute.

    Hi,
    How does oracle know which AO Framework page or process to execute. I use to think this was defined in the Function definition. But looking through some Function definition in HRMS setup I noticed some of them simply calling the same first page, such as the one below used in many managers menus. This initial page is the page that allows managers to choose the employee they want to work on.
    OA.jsp?akRegionCode=HR_PERSON_TREE_TOP_SS&akRegionApplicationId=800.
    My question is, after executing this initial page, how does Oracle then varies the OA page by the diffferent functions?

    Hi;
    Thanks for sharing
    Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding*
    Regard
    Helios

  • How does Apple decide 'what's hot' among iphone apps?

    How does Apple decide what to list in its "what's hot" section of the iphone application store? I assume there is some hard coded logic behind that phrase.

    Sorry, but Apple never discloses how they choose those sorts of features.
    Regards.

  • How does ISE choose which IP to put in URL redirect response?

    Hello,
    does anyone know how does ISE choose which IP to put in URL redirect response if it has more than one interface with an IP address and all interfaces are enabled in the portal configuration?
    I have a single ISE 1.3 PSN with all four interfaces configured, enabled, each on unique VLAN, and each with unique IP address.
    In the CWA portal configuration, all four interfaces are enabled.
    Wired clients connect to NAD, NAD sends RADIUS request to ISE, ISE responds with a RADIUS response including the URL-Redirect parameter which specifies the web redirect URL. ISE configuration uses "ip:port" in the URL. 
    My question is how does ISE choose which of its four interfaces to put in this URL? Is it always the same interface that RADIUS packets were received on? Or does it always choose the first portal enabled interface? Or is there another logic? Configurable or unconfigurable?
    Thanks!

    ISE uses the first interface enabled for that portal, so if want to use a specific interface, then only enable that interface.  If interface is GE0, then default behavior is to redirect with ip value set to node's FQDN.  If interface other than GE0, then default behavior is to return the IP address of the associated interface. 
    Aliases can be configured for each interface using the CLI 'ip host' command to associate a hostname/FQDN to the IP address of a given interface.  When configured, ISE will return that value rather than IP address in redirect.  This is critical if want to avoid certificate trust warning on connecting clients.
    Be sure that certificate assigned to interface includes the correct FQDN or optionally wilcard value in the CN or SAN fields to avoid cert warnings.

  • How we can decide which compensation structure we should use ?

    Hi SAP-Experts .
    Regarding Payroll , We have to compensation structures
    (a.) Payscale Structure (b.) Paygrade Structure .
    Q1. May you Plz. tell me how we can decide which structure we should use ?
           How we can differentiate these structures ?
    Q2. what is purpose of remuneration type in IT-08
    which changes these structures ?
    Thanks .
    Kind Regards.
    Rajneesh
    Edited by: rajneesh mittal on Oct 11, 2010 3:50 PM

    Hi
    - the payscale structure is used when you have salary scales depending on area/region, industry, with Min and Max values, with level that you might want to default the employee (Brussels area employees might have their own salary scale, while Paris employees might have a different salary scale - within these two big areas various criteria might be used to further cathegorize how the salaries are ) (made according to the real salary scales existing in the company, the real salaries that employees have, not necessarily with a market value of the job)
    - if you use the pay grade you will be able to say what percentage of the market job salary you offer your employee, what is the distance between levels and grades; you have a referrence salary. Basically the pay grades are more teoretical values (made after analysing the market, in comparison - we offer 80% of what the market offers for the same job)
    I hope that I could be of help,
    Adriana

  • How can one decide which queries need BIA to enhance their performance?

    How can one decide which queries need BIA to enhance their performance?

    Queries with high data access times will usually require BIA. This can be found by using the Event IDs...
    Please do not post across forums - your earlier post was deleted as duplicate.
    Also search the forums before posting... this question has been answered earlier...
    Edited by: Arun Varadarajan on May 5, 2009 7:24 PM

  • How does Macros help which in Queries ?

    Guys ,
    I wanted to know in detail about the macros.How does they help which are available in Excel sheet of the Bex analyzer.

    A good starting place would be the SAP Help pages on the topic at:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a55f9e09411d2acb90000e829fbfe/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a55f9e09411d2acb90000e829fbfe/content.htm</a>
    Hope this helps...
    Bob

  • Hello, How do I make more space available on my startup disk by deleting files on my Mac Book Air?.

    Hello,
    How do I make more space available on my startup disk by deleting files. Thanks, Teresa
    Mac Book Air OSX 10.8.5

  • How does RAC determine which instance number to run on which node

    Good afternoon
    I am trying to script a process and I need to identify how RAC decides which node runs which instance. Is it the first one of the pair added to the cluster that runs node 1 or is there some other piece of information that I need to work this out
    This is on Redhat Linux with 10.2.0.3 for CRS, ASM and databases
    Cheers
    Peter

    Before "you" start an instance you set env variable ORACLE_SID. This identifies an instance. When you go into sqlplus and issue STARTUP, Oracle starts the instance named by the sid. Thus the instance running on the server is controlled by you. This changes as noted below.
    If you were using a non-Oracle tool to start instances, such as Veritas, then you would see it start the instance you coded into the tool. It would not randomly pick an instance. It looks in the Veritas config file and sees that you always want instance 1 on this node and instance 2 on that node.
    That said, you can make Oracle more random or "grid" like. 10g RAC done Oracle's way likes to bounce around between primary and secondary nodes. To see which instances are running on a node you can "ps -ef | grep pmon". Alternatively, use sqlplus to look in the database: view gv$instance gives you each instance name paired with the name of the host it is currently running on. There is one line of output per instance currently running.
    -Mark

  • How does j_security_check know which page to redirect to?

    Hi All,
    I have implemented j_security_check in our weblogic web app successfully.
    What I would like to know is following the authentication and authorization via the container, how does it know to redirect the user to index.jsp?
    For example, we have login.jsp which contains the j_username and j_password fields, and the action is j_security_check. After the user hits submit and the container authenticates them, how does it know to then direct them to index.jsp? Is it because the welcome tag in web.xml is set up to direct them to index.jsp?
    <welcome-file-list>
    <welcome-file>index.jsp</welcome-file>
    </welcome-file-list>
    Thats the only thing i can think of!
    Thanks in advance.

    That's correct.
    You are specifying a login page, which will ONLY be accessed when the user attempts to view a secured resource.
    After logging in, they will see the page they were originally trying to get to.
    They will only be forced to go to the login page if you secure the page they are trying to get to:
    <security-constraint>
         <web-resource-collection>
              <web-resource-name>Resources</web-resource-name>
              <description>Require users to authenticate</description>
              <url-pattern>/upload/filelist.jsf</url-pattern>
    </web-resource-collection>
    <auth-constraint>
    <description>Define who can access this url-pattern</description>
    <role-name>NTSB Users</role-name>
    </auth-constraint>
    </security-constraint>
    <login-config>
    <auth-method>FORM</auth-method>
    <realm-name>dot-ad</realm-name>
    <form-login-config>
    <form-login-page>/login.jsp</form-login-page>
    <form-error-page>/loginError.jsp</form-error-page>
    </form-login-config>
    </login-config>
    <security-role>
    <description>This role can access the edit</description>
    <role-name>NTSB Users</role-name>
    </security-role>

  • How does TimeMachine determine which backup to link to?

    We have 4 Macs, each having a Time Machine backup file on an external Time Capsule.
    How does the Time Machine on each Mac know which file on that Time Capsule it links to?
    Is it done via the file name, meta-data in the backup file, some other method?
    Ideas?
    Thanks
    -Mike

    Before "you" start an instance you set env variable ORACLE_SID. This identifies an instance. When you go into sqlplus and issue STARTUP, Oracle starts the instance named by the sid. Thus the instance running on the server is controlled by you. This changes as noted below.
    If you were using a non-Oracle tool to start instances, such as Veritas, then you would see it start the instance you coded into the tool. It would not randomly pick an instance. It looks in the Veritas config file and sees that you always want instance 1 on this node and instance 2 on that node.
    That said, you can make Oracle more random or "grid" like. 10g RAC done Oracle's way likes to bounce around between primary and secondary nodes. To see which instances are running on a node you can "ps -ef | grep pmon". Alternatively, use sqlplus to look in the database: view gv$instance gives you each instance name paired with the name of the host it is currently running on. There is one line of output per instance currently running.
    -Mark

  • HT201250 How does backupd decide what counts as a weekly backup?

    Time machine seems to have decided that all but the oldest of my daily backups over a month old are expired backups to be deleted.
    I thought it would keep all weekly backups until the disk became full.
    The backup disk is far from full, so how did it decide that none of the backups it deleted counted as a "weekly backup"?

    About TM "Backup Drive is Full" Alert
    TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
    So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
    Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
    Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.

Maybe you are looking for