How does MAP scan the network

Hi everyone, just sending you this email hoping you can support on the following:
Do you have any document or presentation that explains how the data is gathered through the MAP tool from a pure technical perspective? (How is the data gathered,how the tool works while scanning,what will the tool access while
doing the scanning, will there be anything left on the server after the tool is removed etc …)
I need this to share it with a customer who’s quite worried about the risks his environment will be exposed to by running the tool? Appreciate your help.

Hi,
Greetings of the day!
There are many ways of achieving the above and the easiest way is mentioned on the link attached below :-
http://windows.microsoft.com/en-in/windows/rename-printer#1TC=windows-7
The above applies to other windows OS as well as win7.
And to make it meaning ful, you would need to get creative
If you have any queries related to the same OR any other do reply.
Regards,
Mohammed

Similar Messages

How does one set the Network Name of the Printer

Hi,
I have two 7525's on my home network. How do I change their names from the default serial number based name to something meaningful so IOS/Android users can easily tell which printer is which?

Hi,
Greetings of the day!
There are many ways of achieving the above and the easiest way is mentioned on the link attached below :-
http://windows.microsoft.com/en-in/windows/rename-printer#1TC=windows-7
The above applies to other windows OS as well as win7.
And to make it meaning ful, you would need to get creative
If you have any queries related to the same OR any other do reply.
Regards,
Mohammed

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

In Photo 1.0, how does one access the map showing where all photos were taken, as could be done previously in iPhoto?

In Photo 1.0, how does one access the map showing where all photos were taken, as could be done previously in iPhoto?

Hi JohnDory,
The information side-bar from iPhoto has been removed in Photos App, and so it's been converted into a pop-up window showing both the exposure, aperture and so technical photo parameters, as well as the comments, faces and LOCATION for that photo.
This small floating window is shown whenever you click the button in the app title bar, right clicking a specific photo or pressing ⌘i
If you open the albums view (clicking in the name of the album list, NOT an album name, you can see in your left sidebar - which can be shown or hidden) and press ⌘i without selecting a specific photo the Info pop-up will show the map for your whole library (as well as the total amount of photos, videos, GB used, etc)
So, I'm afraid the "Locations" view (which I really loved) from iPhoto has been ripped off... and we can only get "some sort of locations view" by this method.
As for locations... there is no option for manual geotagging (so, setting location to a specific photography which doesn't have it yet)... that really ****** me off
Regards,
braincasualties.

How does one get the Satellite to work in Google Maps ?

How does one get the Satellite to work in google maps ?

I am experiencing exactly the same issue - iMac, 10.6.8. Thanks for reporting it - I thought I was going nuts. What happens from here? Does Apple watch these postings? Do we just hope that they find the bug themselves? Is there a vehicle for reporting bugs directly to Apple?
Thanks in advance.

How can I scan my network to determine which PC is using static IP or DHCP?

Hello friends,
I`m using Spiceworks for couple of days alreadyand need some help on this - In another post i saw that via SpiceWorks I can see how many PCs are using DHCP or Static IP (http://community.spiceworks.com/topic/37663-how-can-i-scan-my-network-for-static-ip-s-without-checki...) but is for previous version of the program. Currently I`m running version 7.4.00059.
Can someone point me in the right direction where can I fing this information?
Thank you very much for the help.

Get a sneak peek of VeeamCloud Connect Replication– Veeam’s new DRaaS technology for service providers:• Leverage the Veeam cloud gateway to set up customer connections, without the need for VPN.• Use proven Veeam replication technology to create standby VMs.• Use Veeam network extension appliances to give customers seamless connections between their production and DR sites.• Allow customers to start failover in a complete self-service way from a mobile-friendly web portal. See you 7/7. -- http://go.veeam.com/webinar-delivering-draas-veeam.htmlNote: This webinar is for service providers. If you’re a Veeam customer interested in using Cloud Connect Replication in Veeam Availability Suite v9, check out this on-demand webinar:http://www.veeam.com/videos/fast-secure-cloud-based-disaster-recovery-veeam-cloud-connect-6345.html

How does Activity Moniter measure Network speeds.

How does Activity Monitor measure network transfer rates? They are always much lower than Web based speed checks. Typically my download speed on Activity Monitor is 162 KBS whereas Web based speed check return 1.2 MBS.

Duh! I should have realized the AT&T and Activity Monitor are using two different measurements. AT&T uses bits. Activity Monitor uses Bytes. Multiply Bytes by 8 to get bits. So 162 K-bytes in Activity Monitor = 1.29 M-bits in AT&T speed test. The problem comes in misreading the labeling of the units measured. Which is something that causes confusion frequently because the industry is not uniform in its use of labels.
It is interesting that AT&T uses the higher number. Is this a marketing strategy? Don't get me wrong, I am very satisfied with their service.
I am also VERY satisfied with my MacBook Pro. The best Mac I ever owned (since my first Mac in 1993 and Apple 2's for 10 years before that). Awesome system software, boots faster than previous MacBooks I owned. Has been flawless in performance. I bought it from Apple refurbished. It came with a larger HD than I ordered. I have used both WinTel (since 1993) and Apple machines. There is no comparison IMHO.

G3/OS 10.3 does not recognize the network

I just mounted a new Airport network card into a (WiFi capable slot) iMac G3 (576 Mb RAM) running OSX 10.3. After restart, the Airport icon in the toolbar is present, albeit all gray, as one would expect before connecting.
My network is served by a D-Link 801.11G WiFi router. SSID is not cloaked - it is broadcast and freely accessible: It works, several (non-Apple) laptops recognize the network and connect to it fine.
However, my iMac does not see the network, neither from the Airport icon in the toolbar nor scanned from the Airport Setup Wizard. I located the iMac right next to the WiFi point to eliminate any signal strength/interference issues.
I will bring an Airport iBook G4 as well as an Airport Express wireless point to check if there is something wrong with this iMac's card, and will also bring in a long CAT5 patch cord to hard-connect the G3 (to download any Airport patches or firwmare upgrades), but was wondering if anyone has any thoughts on why a non-cloaked 802.11G network would not be recognized by my iMac.
SK
iMac G3 slot (blue) Mac OS X (10.3)

Ensure that you have the antenna wire properly connected to the AirPort card in the iMac.
Also ensure that your D-Link is configured to work either in 802.11b/g or "802.11b only" mode. Since the original AirPort card in your iMac is 802.11b, your router must be in a 802.11b compatible mode.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

Scanning the network for devices with Network Monitor

At the moment there are no way to scan your network for devices. And I think there is a good reason for not doing so. If your users shut down their PC when their day is done - do you need an alert for that?
They way this is designed is for you to decide which devices is the most important, so much that it demands live monitoring.

Are they going to add the ability to scan the network for devices instead of having to manually add them? I've seen it in the inventory management but can't find a way to do it in the Network Monitor. I apologise if you can already do this but I haven't figured it out myself.
This topic first appeared in the Spiceworks Community

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

How do I change the network settings on my Apple TV? We have two wireless options and need to switch.

How do I change the network settings on my Apple TV? We have two wireless options and need to switch.

Welcome to the Apple Community.
Settings > General > Network > WiFi and select your network.

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

In InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to

This may be a basic question... but in InDesign, how does one determine the pixel size of a text box? Specifically, we need to write text to specifications of 600 pixel width, and have no idea a) how to scale a text box to specific pixel width, b) how to determine what word count we can fit in, and c) how to do it in a table? Thanks!

Set your ruler increments to pixels Preferences>Units & Increments. You can fill the text box with placeholder text Type>Fill with Placeholder text and get a word count from the Info panel with Show Options turned on from the flyout.
From the Transform panel you can set a text box's width and height

How does MAP scan the network

Similar Messages

Maybe you are looking for