How does nat selectoin work when more than one nat command?

My router's configuration contains two ip nat inside source commands with route maps. One command is a static translation and one is a dynamic. Is this the way processing works:
The inside packet source address is processed against one of the command's route map (which command?). If that route map permits the address, then the source address is natted.
However, if the first route map denies the address, then the router continues on to the second ip nat inside source command and processes the address against its route list.
Right?

Hi
Basically yes, the router will compare the packet against all route-maps until it finds a match (if any) and then apply the NAT.
If you think about it logically it shouldn't matter which order it applies them because if you are statically mapping one address to another you would ensure that this address is never matched in your dynamic NAT setup otherwise you could get very unpredictable results.
HTH
Jon

Similar Messages

  • How do you handle it when more than one signature is required on a form?

    We have a situation where we are trying to replace pen and paper where both the employee and their supervisor must sign off on a form before is comes to us.  Do you have a recomended way of accomplishing that?  Could the completion of the first form result in the creation of a pdf that would have a second degital signature?
    Thanks for any and all ideas!

    Hi,
    You may want to check the EchoSign site: https://www.echosign.adobe.com/en/home.html
    and post your question to the EchoSign forum: http://forums.adobe.com/community/echosign
    Thanks,
    Lucia

  • How does time machine work when being used with a mac pro?

    How does time machine work when backing up a mac pro?
    Considering the fact that the mac pro can hold 8TB and a external (non NAS) hard drive can hold only 2TB does time machine only backup the OS disk.

    macnewcomer22 wrote:
    Considering the fact that the mac pro can hold 8TB and a external (non NAS) hard drive can hold only 2TB does time machine only backup the OS disk.
    Time Machine will backup everything by default, on every disk in your Mac.
    Choose System Preferences > Options to exclude items. You could exclude everything except your OS...but I'd think it is your data that's more important to you, if you have to make choices.
    See...
    http://discussions.apple.com/thread.jspa?threadID=1964018
    While it's true you can store almost 8TB, how much do you think you'll actually store? If you have 1TB of data you want to store then a 2TB drive can do it. Also when your TM drive begins to get full it will begin deleting the oldest backups to make room.
    You could also get a Drobo with 8 bays...
    http://www.drobo.com/products/index.php
    -mj

  • How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

    How do you select and move more than one bookmark at a time?
    Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

    Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
    * one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
    *see also [[How to use bookmarks to save and organize your favorite websites]]
    *and [[Use bookmark folders to organize your bookmarks]]

  • Multiple select queries used in Excel BI report ,fetching data from Sharepoint DB(SP2010_Prod_ProjectServer) causing blockage on DB ,when more than one workbook(same copy of Excel BI Report) refreshed using Refresh All option.

    I am using mutiple select queries to fetch data from Project Server 2010 DB(its sharepoint DB) and these queries fetch data in Excel BI report by establishing connection with DB using instance name and all. I have enhance all these select queries and data
    is being fetched in secs. but when more than one copy of same Excel BI report is refreshed using 'Refresh All' option, then these select queries cause blockage on DB.
    Please let me know mitigation for this blockage issue.
    Should I use begin transaction and commit transaction statements/ shared lock statements.
    please reply

    Hi,
    run same query at the same time?

  • Using Maverick, how is it possible to open more than one calendar window?

    Hi, I'm using Maverick 10.9.1
    My question is: how is it possible to open more than one calendar window? i would like to have on the right my personnal calendar dates and on the left, my company calendar.
    Many thanks in advance for your help!
    ph

    See if the section on group calendar helps.
    http://www.dummies.com/how-to/content/basics-of-calendar-in-os-x-mavericks.html

  • How can i find out the more than one times occurance of integer in a array?

    How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

    Kumar_Mohan wrote:
    How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
    Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

  • How do I install Lion on more than one Mac

    How do I install Lion on more than one Mac?  As I have a MacBook Pro and a iMac?

    Purchase Lion on one of the machines.
    Log in to the MAS with the other machine, using the same Apple ID you originally bought Lion with. Go to the Purchased Tab and Lion should be available for download. It should say Install.
    It's possible that you will be asked for credit information as a form of verifying who you are.

  • HT3529 How do you send message to more than one address, iPhone 5, 6.0.1/

    How do you send message to more than one address on iphone 5, 6.0.1?

    ... or, once the first address appears as a bubble, simply start typing the second address in the "To" field.

  • SMS ---HOW DO YOU SEND SMS TO MORE THAN ONE PERSON

    SMS HOW DO YOU SEND SMS TO MORE THAN ONE PERSON

    yes you can. look at this:
    4. I cannot receive or send MMS (text with pics)?
    iPhone at this time CANNOT send MMS at this time. Whether or not this will be remedied remains to be seen. A workaround is to email their SMS/MMS servers with the picture as an attachment.
    Alltel = [email protected]
    AT&T = [email protected]
    Boost Mobile = [email protected]
    Cingular (AT&T) = [email protected]
    Einstein PCS = [email protected]
    Sprint = [email protected]
    T-Mobile = [email protected]
    US Cellular = [email protected]
    Verizon Wireless = [email protected]
    Virgin Mobile = [email protected]
    *x is the digit of your phone number
    for an awesome thread with lots of good info:
    http://discussions.apple.com/thread.jspa?threadID=1032295

  • Use of layout when more than one parameter - Error Missing Parameter Values

    Hi,
    Is it possible to use a crystal report which has more than one parameter as the layout for the bill of materials report.
    I have 3 parameters
           1. DocKey@       The Bill of Materials to be printed
           2. Number of levels to be printed
           3. type of levels to print.
    When I try to print it gives me the error Missing Parameter Values.
    I have tried changing the DocKey@ to CodeKey@ but the same error.
    Does anyone now where to find a list of these tokens?
    Thanks
    Chris

    I looked at the crystal report conversion to try to find what parameters it used and found none.
    I have managed to create and use a crystal report to replace the production order using DocKey@ as the parameter.  This works within SAP.  However I have converted the system production order to crystal reports and from the converted report I cannot see any parameters at all.
    How and where can you find out what paramters you need to use to replace any PLD report?  Several reports have multiple selection criteria before the report prints.  How can you find out what their tokens are called?  I am starting to pull my hair out.  I am getting great help from this forum, but do you know any documentation which actually explains this area.
    Thanks
    Chris

  • How to create a theme with more than one master-slide size defined?

    I would like to create a Keynote theme that has more than one size of page defined - for example one for on-screen show, and one for printing.
    I noticed that the stock themes, and those from theme vendors, come with multiple page dimensions, and that the master slide layouts for the 'same' master slide appear to be designed differently for the different sizes.
    How do I create themes like this in Keynote? I cannot find any information about this in the Keynote manual. I have worked out how to change the master slide dimensions, but not how to tell Keynote that the layout I've created for a slide is for a particular set of dimensions. So when I look at my theme in the theme browser, I only see the dimensions I had selected last time I saved my theme showing.
    Any help most appreciated.

    The same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
    Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated

  • How to create combobox to display more than one columns

    I need kind help with the following question. As the combobox includes two pieces--textbox and the combobox list. Then how to create a combo box bean, which is based on table EMP(empno number(6), ename varchar2(40)) records for example, to achieve these features:
    1) allow more than one columns to be displayed in its records list--e.g., I need to show these records:
    empno (value) ename (label)
    103 David M Baker
    104 David M Baker
    105 Kelly J Volpe
    106 Krista F Carpenter
    107 Michelle P Silverman
    The two 'David M Baker's are different employees, but unfortunately, with the same name.
    2) allow combo box list to return the column value 'empno' even though it shows both columns as above. i.e., if user picks the second record above, then the combobox list returns 104 to the textbox in the background, but the 'David M Baker' is displayed on the textbox. Of course the combobox list may return 'David M Baker' if needed when there is only one column in the list as the current standard feature.
    3)allow partial match search by typing in some letters. i.e., if user types in the textbox of the combobox letter 'K' or 'k' then the partially matched records
    105 Kelly J Volpe
    106 Krista F Carpenter
    should be automatically displayed in the combobox list, not the whole list as above; then user may double click to choose one of the two or if user continues to type in 'R' or 'r', then the uniquely matched record 'Krista F Carpenter' is displayed in the textbox and the 106 is returned to the textbox.
    4) as a bonus if it's doable, allow combobox to return values to different textboxes when its records list has more than one columns.
    The reason I need these features is that I am working on the project migrated from Microsoft Access applications to centralized Java version web application. We at beginning promised to users community that Java swing will provide all the GUI user friendly features Microsoft Access has, but now we got stucked--we ate our words and got tons of complains from our users community. This is just the most needed component I posted here. I really hope that Java would add all the default GUI user-friendly features to compete with MS since its Win95 GUI has been accepted as industry standard. And most users are used to it. They claimed that they don't know and don't care what tool you use the newly created application should be more user friendly, not the opposite.
    I would be very much appreciated if any one would help me with this item.

    Thanks for your comments. I think nobody expects Sun to write everything including special features for its components. But I do think Sun should provide at least those standard user-friendly features for the GUI components because most users have been used to the GUI user-friendly features provided by Win95 and Access/Excel applications. Then this will help us to productively create applications to beat MS applications.
    Other wise like me, to get the existing GUI features, existed in old MS Access application, for our migrated Java application, I must re-create the GUI components library first which is a big burden to me at least, for others it might be fun for coding on their own from scratch, but I have to focus on the timing of project.
    If you really can pass the request to Sun and push them move a bit, please pass these words: before Sun starts to revise them, please play around window GUI, e.g., Access/Excel applications, then plan what to do, the bottom line is to equally match or better than them in FUNCTIONALITY(Look and feel is not my focus here). Don't ignore the influence of Windows regardless of you hate it or love it, the reality is most users are so familiar with windows GUI features which are accepted as industry standard. Thus the choice is to match or better to beat them. Don't make your car by closing your door, don't assume users will like what you come out in a closed room.

  • How can I synchronize safely from more than one computer?

    First, I have set up my iPod to work with two computers: my primary computer, which is my desktop at home. Later, I also "authorized" my laptop (as a secondary source) to also be able sync to my iPod.
    My question is that when I go to synchronize some podcasts I just downloaded to my secondary computer (my laptop), I get the following prompt: "Are you sure you want to sync podcasts? All existing podcsts on the iPod '<my iPod's name>' will be replaced with podcasts from your iTunes library."
    From this message, since my iPod is plugged into my laptop, I assume it's referring to my iTunes library on my laptop (which only has the few podcasts I just downloaded). And it sounds like it's going to delete the podcasts that are already on my iPod.
    I definitely don't want it to "replace" the ones I already have sync'd from my home computer; +_I just want to add the ones I have downloaded to my laptop._+ How can I make it so I can safely add the new ones without disturbing those I already have sync'd and want to keep? I'm a bit confused about how syncing works when you have more than one computer to sync to the iPod.

    You cannot do what you want.
    The ipod touch can sync with ONE computer/library at a time.
    When you sync to a different computer/library, the ipod touch will first delete the current itunes content form the iphone, then it will sync the content from the new computer.
    This is the way it is designed.

  • [JS CS3] Need an array of paragraphs when more than one story

    Hello,
    If I have a document with only one story the following line returns an array of all the paragraphs. I can then iterate through the array to my hearts conent.
    var paraRef = app.activeDocument.stories.everyItem().paragraphs;
    However, if there is more than one story, then, according to the Data Browser, some of the object Paragraphs contain more than one paragraph and some of the object Paragraphs are invalid. The length of paraRef is correct, i.e. it equals the total number of paragraphs in the document, but each member of this array either  "bunched up" or contains nothing.
    How can I write this so that  when I have more than one story I can get an array of all the paragraphs?
    Thanks,
    Tom

    Thanks, Harbs and Dave!
    Before I saw your answers I came up with a (longer) solution:
    var storyRef = app.activeDocument.stories;
    var arrStories = [];
    for(var j = 0; storyRef.length > j; j++){
        arrStories.push(storyRef[j])
        }//end for
    var arrParas2 = [];
    for(var x = 0; arrStories.length > x; x++){
        for(var y = 0; arrStories[x].paragraphs.length > y; y++){
            arrParas2.push(arrStories[x].paragraphs[y]);
            }//end for y
        }//end for x
    But I am curious about something. Your solution and my solution both result in an array of all paragraphs in the document but the data browser shows these arrays in different ways. I am wondering how to intrepret them.
    Your solution does not show the indexed paragraphs, mine does. See the images below.
    Your solution:
    My solution:

Maybe you are looking for

  • Problem when a JPanel with a JDialog regains focus

    I've a simple application with a JFrame and a nested JDialog under MS Windows. When it regains focus (i.e. another application like MSWord was active and with Alt+Tab or with a mouse-click in taskbar I force my application to gain focus), the JDialog

  • G4 going to Japan Power Converter Needed?

    I am sending a Digital G4 ome to Japan for my exchange student and need to know if power supply will recognize the 100 volt 5o Hz or will I need an adapter. I porbably already know the answer to this one but just wanted to confirm it. Thanks

  • Is it possible, automatically, to create a border when a text is inserted.

    Is it possible, automatically, to create a border when a text is inserted. Example: List with subjects is: Name: address: etcetera... When the first subject (Name) is typed then a border will appear around the whole text Is this possible in Indesgn?

  • How to run a particular JRE at run time

    Hi All, I have two different versions of Java installed in my system (JDK 1.5 & JDK 1.6). The path in environment variables is setted to jdk1.5. But after installation of jdk1.6 it is showing as jdk1.6. I want to test my code for these two different

  • Paste objects from Illustrator CC to Fireworks CC

    Hello, My problem is that I can´t paste objects from Illustrator to Fireworks. I have already checked that the colour mode is RGB. Both programs are the Creative Cloud version and updated. Can you help me please? Thank you!