How does obj permitted in Determination (Org. Unit) work?

Hi ,
How does Object permitted in Detetmnation chck box in the Org Unit works....
Please explain....
Many Thanks,
Neeraj

Hi Neeraj,
Object permitted check box in organization model helps in to automatic determination of sales org, division, distribution channel in configuration. And another thing it carries all data to the next level of organization. For example if you have defined the the org structure and you have assigned the value of the field like Language and country in you org. structure then in next level you will get these data also if you have clicked and if you want to create any transaction and you hane assigned your sales area in org. structure it carries the sales area data to your transaction.
Another example if you have defined your sales area in org. structure and mark the check box in object permitted then while createing the product you can assign the sales area while configuring the product, means it will carry all the sales area data.
Thanx
Chinmaya

Similar Messages

How does ABAP client proxy determine the sender business system

When we use ABAP client proxy to send a message in XI-SOAP format to the integration engine, how does the client proxy determine what is the sender business system, i.e. how does it know what value it should insert in the sender service field in the SOAP envelop.
For example, at first, the business system X8A_105 corresponds to the technical system X8A_105, so when the client proxy sends out a message, the sender service is X8A_105. Then I delete the business system X8A_105 in the SLD, and create a new business system that is associated with the technical system X8A_105.when the client proxy sends out a message, the sender_service is still X8A_105, why?

Hi Annie,
Execute the following function module in your business system and see what name it returns..
LCR_GET_OWN_BUSINESS_SYSTEM.
You can always debug the code inside the above FM to find out how it gets the business system name...
I think the issue should be related to cache. I would also suggest you to logoff from your business system and then login again.
Regards,
Sumit
Message was edited by:
Sumit Khetawat

How does CRM on Demand determine the highest priority Task?

In the "My Homepage -> My Open Tasks" List there is a sortable priority column. If you have a number of tasks in the list with different priorities and click on the priority column they will be sorted in descending order by priority as follows:
"1-High"
"2-Medium"
"3-Low"
I have tried editing the order on the Edit Picklist screen for the Activity Priority field (by navigating to Admin -> Application Customization -> Activity -> Activity Field Setup) but this appears to have no effect on the priority sort order on in the Task List. I have also tried adding new values to the picklist and they always appear as the lowest priority.
So my question is how does CRM on Demand determine that the priority picklist value "1-High" is the highest priority when sorting the tasks?

There is a sort order on the activity applet based upon the priority field. As 1 comes before 2 and 3, it would be sorted to the top.

For an Org Unit, how do we get all Reporting Org units (Also employees reporting to the sub org unit) & Employees ?

Hi Experts,
I have a very common requirement in SAP HCM ABAP development.
For an Org Unit, how do we get all Reporting Org units(Also employees reporting to the sub org unit) & Employees ?
I have tried using RH_STRUC_GET_MULTIPLE_ROOTS and RHPH_STRUCTURE_READ, but the evaluation path is insufficient to get all objects under it. I tried with both O-S-P and O-O-S-P evaluation paths and as per some constraints, I can’t create a customized evaluation path for a reason.
I am using PNPCE database for user selection screen and user would be advising the Org unit. I even referred the standard transaction ‘S_AHR_61016495’ which is using PCH logical database.
I would really appreciate if anyone could provide a solution for this. (Rewards guranteed )
Kindly help.
Thank you.
Regards,
Mahesh Konade

Hi Alexandre,
Although I could not respond in time, thank you so much for your prompt reply.
I had used the same RHPH_STRUCTURE_READ and passed the appropriate values to it, but it did not populate the required results. I cross checked the results manually, may be some relations issue. But later I tried using RH_STRUC_GET_MULTIPLE_ROOTS and it worked fine.
Meanwhile I had done a workaround with PCH and RH_STRUC_GET and it served the purpose of getting all the Org units, it’s reporting sub-org-units, positions and persons (The deepest structure from the root org unit advised on selection screen).
The solution I used is, I captured the org-units advised on selection screen by user using PCH logical database and then by looping on sub-org units reporting to the main org-unit I populated related positions and persons holding them and assigned it to the PNPCE logical database.
Thank you so much for the help.
Regards,
Mahesh Konade

How we will create relationship with org unit and task catalog

HI Experts
How we can create relationship between Org unit and Task Catalog in Organisation management once we grouped all the tasks in one group.
For Example we have one org unit under that we have 3 depts those will consider as org units only.under 3 depts we have professor,Lecturer,Reader as jobs and positions also.If we create Professor tasks in task catalog which all the tasks will be assigned to positions as well.
If it is Org unit and Task catalog how we can create relationship.
Thanks
Rajji

Hi,
Please try.
DATA: lt_hrp1001 TYPE STANDARD TABLE OF P1001.
DATA: lw_hrp1001        TYPE p1001.
lw_hrp1001-mandt = sy-mandt.
lw_hrp1001-plvar = parent_pos-plvar.
lw_hrp1001-otype = parent_pos-otype.
lw_hrp1001-objid = other_pos.
lw_hrp1001-istat = parent_pos-istat.
lw_hrp1001-begda = sy-datum.
lw_hrp1001-endda = lc_endda.
lw_hrp1001-infty = '1001'.
lw_hrp1001-aedtm = sy-datum.
lw_hrp1001-uname = sy-uname.
lw_hrp1001-rsign = codes.
lw_hrp1001-relat = relats.
lw_hrp1001-sclas = lc_sclas.
lw_hrp1001-sobid = cord_pos.
append lw_hrp1001 to lt_hrp1001.
      CALL FUNCTION 'RH_INSERT_INFTY'
        EXPORTING
          fcode               = 'INSE'
          vtask               = 'S'
          commit_flg          = 'X'
        TABLES
          innnn               = lt_hrp1001
        EXCEPTIONS
          no_authorization    = 1
          error_during_insert = 2
          repid_form_initial = 3
          corr_exit           = 4
          begda_greater_endda = 5
          OTHERS              = 6.
Hope this helps.
regards,
Xiang Li

HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT

HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT
Regards,
Kumar

HAI..
External number assignment
If you want the user to assign the numbers, enter "EX" in the 'NR' field. The number ranges are then indicated by the letters "EX".
Number assignment for plan version 10 / object type S: Subgroup 10S

How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?

How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?

How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?, How does iPad Mini with Cellular Sprint Captel work in hard of hearing person for captioned calls and music?

How does the generate ddl of the ODI works ?

how does the generate ddl of the ODI works and is it used to generate ddl of any technology ?
what is the use of interface in and interface out ?

The best way to solve this is to look at the module functions that clears the buffers and use it.
Closed.

How does the ituns app on my ipad2 work?

How does the itunes app on my 1pad2 work?

The iTunes app on your iPad is just a portal to the iTunes Store. To play music or videos, use the Music App and the Videos App.
Here's a link to iPad iOS5 User Guide

CSS: How does DNS Scripted Keepalive (ap-kal-dns) work?

Hello everyone,
I have a question about how does DNS Scripted Keepalive (ap-kal-dns) work on CSS 11503.
According to the "Using the CSS Scripting Language",
http://www.cisco.com/en/US/partner/docs/app_ntwk_services/data_center_app_services/css11500series/v7.50/configuration/administration/guide/Scripts.html
it says
Since we just want to see if the DNS server is alive we will send a simple DNS Query. This query is hard coded in hexadecimal and sent raw to the DNS server.
and
Receive some unexplained response. We don't care what it is because an unstable DNS server or a non-existent one would probably not send ! us any data back at all.
but it also says
Failure Upon: 1. Not resolving the host's IP from the domain name
And according to the "How to Configure the CSS to Load Balance DNS Servers and Use the DNS Scripted Keepalives",
http://www.cisco.com/en/US/partner/products/hw/contnetw/ps789/products_configuration_example09186a00801d015a.shtml
it says
The script is hard-coded to resolve www.cisco.com. It does not matter if the DNS server can resolve this address or not, as long as a DNS response comes back that the service is alive. This keepalive is only testing if a DNS server can respond to a query, not if it can resolve a specific name. The script queries from the CSS to DNS internal servers keep track of the availability of the DNS servers.
but it also says
Access to Internet Domain Name System Root Servers is required for successful implementation of DNS scripted keepalives.
So I am confused whether DNS server has to resolve the host's IP address correctly for DNS query received from CSS or just needs to reply any response but not need to resolve it.
I would like to recap about my question.
Q1: Does DNS Scripted Keepalive (ap-kal-dns) send DNS query with cisco.com as DNS name by default?
Q2: Does DNS server has to resolve IP address of cisco.com or just need to respond for DNS query with any response but not need to resolve IP address of cisco.com?
I understand I should get capture data and see how DNS scripted keepalive works, but I can not prepare lab environment to do it at the present.
Your information would be appreciated.
Best regards,
Shinichi

yes the query is for www.cisco.com and the script expect a reponse that contains the word cisco.
Gilles.

How does the fade in or fade out works on a apple loop

how does the fade in or fade out works on a apple loop

What does the manual say about it?
http://help.apple.com/logicpro/mac/10/#lgcpf7c0ee6c

How does high pass filter determine frequency

I Am having a hard time understanding how the high pass filter determines high vs low frequency. What value is it measuring. ? Change in RGB values or Contrast ? I see the words sharpness or blur , but what values determine amount of blurriness or sharpness? Is there and actual frequency being measures or is that just a metaphor To compare it to the audio high pass filter ?
Any insight into the inner workings of this filter is appreciated.

Some further explanations:
Audio signals:
frequency = cycles per second
This is the frequency in the time domain.
An arbitrary signal can be represented by a bundle of harmonic signals (sine, cosine)
plus a DC-part (direct current, non periodical component).
A typical high-pass filter for audio signals:
The cut-off frequency fc is found at the transition between increasing gain
(low frequency) and fixed gain 1.0 (high frequency).
frequency   gain (attenuation)
0.01 fc   0.01
0.10 fc   0.1
1.00 fc   0.707
10.0 fc   1.0
100 fc   1.0
A typical high-pass filter for digital images:
frequency = cycles per unit length or (better) cycles per pixel
This is the frequency in the spatial domain.
The highest frequency is 0.5 cycles per pixel (alternating black and white pixels)
An arbitray row in a digital image can be represented by a bundle of harmonic signals
plus a DC-part.
Each channel R,G,B is filtered individually, one after the other.
Frequency and gain are as above.
A high-pass filter applies an attenuation <<1 to low frequency signal components
and removes the DC-component entirely. This would result in a black background.
Therefore the background is shifted to R=G=B=128 (8bit per channel) or
R=G=B=0.5 (normalized).
Sharp edges contain stronger high frequency components. These are retained.
http://en.wikipedia.org/wiki/High-pass_filter
In this doc we find a simple implementation:
y[0] := x[0]
   for i from 1 to n
     y[i] := a * y[i-1] + a * (x[i] - x[i-1])
   return y
x[i] are values R (or G or B) in a row at column i in the original image
y[i] are values R (or G or B) in the same row at column i after filtering.
Factor (a) contains indirectly the cut-off frequency.
This example does not yet apply the shift to R=G=B=128.
The implementation can be different (non-recursive filter instead of recursive, as above,
higher order instead of first order, using a filter kernel 3*3 or 5*5 pixels instead of working
in each row independently).
I'm not trying to explain how Photoshop works! There are so many alternatives.
Best regards --Gernot Hoffmann

How to find users logged on Org Unit

Hi All,
We are setting up printing on our CRM 5.0 system (Web interaction centre) and was wondering if anyone knows of a way to find out what Org unit the users is logged on as ??
We are using Actions to print specific smartforms off for the users and need the prints to go to an assigned printer.. We are hoping to use a printer that is assigned to the 'Default Printer' attribute in the org structure (PPOMA_BBP)
As you will be aware users can be in many positions (under the org units) in the org structure and when we log onto the Web IC we get the option of which one we would like to use... Is there a function that can read this Org unit so we can use it in the printer determination BADI to decide what printer the prints will go to ???
Many Thanks
Gaz

In case anyone is still looking for this solution, here is how:
data: lr_usett type ref to cl_crm_ui_user_cb.
lr_usett = cl_crm_ui_user_cb=>get_instance( ).
call method lr_usett->get_org_object
    importing
      ev_org_objid   = lv_objid
      ev_org_objtype = lv_otype.

How does Pulse Params Vi determine pulse width

I need to know how the PulseParams vi calculate pulse width, rise/fall time? Is it based on the standard 10/90 method or something else? How does it determine what is a "valid" pulse? What is the "Delay" parameter and how do you use it?

Hello Lancer,
The following is taken from LabVIEW Help under Pulse Parameters:
X is the input sequence. X must meet the following conditions:
� The number of samples in X must be greater than or equal to 3.
� X should have a rising edge, a plateau, and a falling edge.
� The expected peak noise amplitude must be less than 50% of the expected amplitude.
If the number of samples in X is less than 3, the VI sets all the pulse parameters to NaN and returns an error. If X does not contain a rising edge, plateau, and falling edge, the VI analyzes the data, assigns values to as many pulse parameters as it can identify, and sets parameters it cannot identify to NaN. The VI does not report this condition as an error.
Note X can be a positive- or negative-going pulse. A histogram is used to determine top and base. If the difference between top and base is negative, the pulse is considered negative-going with a negative amplitude.
If the data in X is noisy beyond the expected 50% amplitude, the VI does not have enough information to differentiate between glitches and pulse data and may assign incorrect values to the pulse parameters. Because it cannot be detected, the VI does not report this condition as an error.
Note If the data is noisy, you can apply a median filter to the data before passing it to the Pulse Parameters VI. Refer to Noisy Pulse Analyzed with a Median Filter for more information about analysis with a median filter.
Note When the X data is a constant value c, the VI sets the pulse parameters to the following values.
amplitude = overshoot = undershoot = delay = duration = 0.
top = base = c.
risetime = falltime = slew rate = NaN.
slew rate is the ratio between (90% amplitude - 10% amplitude) and the risetime.
overshoot is the difference between the maximum value in the pulse and the topline.
risetime is the time required to rise from 10% amplitude to 90% amplitude on the rising edge of the pulse.
top is the line that best represents the values when the pulse is active, high, or on. For a negative-going pulse, top is less than base and results in a negative amplitude. For a positive-going pulse, top is larger than base and results in a positive amplitude.
amplitude is the difference between top and base.
base is the line that best represents the values when the pulse is inactive, low, or off and is the level closest to zero. For a negative-going pulse, base is larger than top and results in a negative amplitude. For a positive-going pulse, base is less than top and results in a positive amplitude.
undershoot is the difference between the baseline and the minimum value in the pulse.
error returns any error or warning from the VI. You can wire error to the Error Cluster From Error Code VI to convert the error code or warning into an error cluster.
falltime is the time required to fall from 90% amplitude to 10% amplitude on the falling edge of the pulse.
duration is the difference between the falling edge time and the rising edge time at which 50% amplitude occurs.
delay is the difference between the time origin and the time at which 50% amplitude occurs on the rising edge of the pulse.
Pulse Parameters Details
Note The Cycle Average and RMS, Transition Measurements, Pulse Measurements, and Amplitude and Levels VIs provide more measurements than the Pulse Parameters VI, and you can configure each of those VIs.
The waveform-related parameters are slew rate, overshoot, topline (top), amplitude, baseline (base), and undershoot. If y-axis units are volts, then slew rate has units of volts per sample. The time-related parameters are risetime, falltime, duration (width), and delay and are expressed in units of samples.
Note The VI assumes the input pulse or pulse train has a bimodal, or two-state, distribution. Any input other than a bimodal input can lead to inconsistent results.
The Pulse Parameters VI uses the following steps to calculate the output parameters.
1. Find the maximum and minimum values in the input sequence X.
2. Generate the histogram of the pulse with 1% range resolution.
3. Determine the upper and lower modes to establish the top and base values.
4. Find the overshoot, amplitude, and undershoot from top, base, maximum, and minimum values.
5. Scans X and determines the slew rate, risetime, falltime, duration, and delay.
The Pulse Parameters VI interpolates duration and delay to obtain a more accurate result not only of duration and delay but also of slew rate, risetime, and falltime.
If X contains a train of pulses, the Pulse Parameters VI uses the train to determine overshoot, top, amplitude, base, and undershoot but uses only the first pulse in the train to establish slew rate, risetime, falltime, duration, and delay.
Note Because pulses commonly occur in the negative direction, the Pulse Parameters VI can discriminate between positive and negative pulses and can analyze the X sequence correctly. You do not need to preprocess the sequence before analyzing it.
If none of these suggestions help, or if I�m not correctly understanding your issue, please post the software and versions you are using, the applicable portions of your code, and any other information that may help, and I�ll be happy to look further into it.
Have a nice day!
Robert M
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments

How to read employee user's Org unit name,Org unit add and user position

Hi ,
Is there any Function module or a class-method to read a user assinged Orgunit name ,Org unit address and the user position at that org unit.
i have a given out a search on sdn but could not get the answer.
Thanks for your time
Seema

Eswar,
Thanks for your fast reply.
I found this table before.But i do not have idea of passing what paramters to get my specific org and position of an employee data from this table.
Let say i know my BP number for employee and Username of him.
i could find out his Obj id using EMP user name.
When i look into table HRP1001 using above Obj id, i could see there are 3 entries exist in table , among one of them is talking about position as
Sclas = S and SOBID = 50020832.
So how would i know by having this number , is it dealing with position and what kind of position it is,,,whether a manager or something else?
Hope you got me.
Basically am aslo looking for a FM where in i cold porvide aBP number or EMP username, where inturn i ll get a Emp position his org details.
Seema
Edited by: seema rajjot on Apr 9, 2010 8:40 PM

How does obj permitted in Determination (Org. Unit) work?

Similar Messages

Maybe you are looking for