How does one actually make a subscription work? Please Adobe accept my cash!

I've tried many times to subscribe but have been unable to get transaction to work, and Adobe don't seem to went to provide support.
I'm directed here for what I believe is mostly a matter of being able to get a credit card transaction to clear within their system. Having tried several times, on one occasion I was offered an 800 number to call which simply didn't work. It also said that Adobe were looking at my payment and would get in contact. And that I would receive an email. None of which seem to have happened.
I have friends at Adobe I can call... but would have preferred to go about this via the online process.
Adobe.. do please get in touch.
Thank you.

Hi... that is indeed the link I followed.
It offers choices on problems and an FAQ. But then if those don't answer then it directs you here to the Community.
There is no way to actually contact Adobe directly it seems.
Best,

Similar Messages

How does one get the Satellite to work in Google Maps ?

How does one get the Satellite to work in google maps ?

I am experiencing exactly the same issue - iMac, 10.6.8. Thanks for reporting it - I thought I was going nuts. What happens from here? Does Apple watch these postings? Do we just hope that they find the bug themselves? Is there a vehicle for reporting bugs directly to Apple?
Thanks in advance.

Analog to digital, how does one actually pass through a TRV120 or TRV950E ?

I would need some technical advice on how to connect a camera with pass-through feature in between a VCR and the computer.
I am trying to copy VHS-C cassettes to the Mac via a Digital8 Sony TRV-120. I use A/V pin connector from the VCR, Firewire to the Mac. I get the VCR image on the TRV's LCD, but nothing on the Mac. iMovie says the camcorder is empty, dot. If I put a tape inside, iMovie launches the tape and I get the image from the tape. I was pretty certain that the TRV-120 had the pass-through feature, having seen it mentioned on some reviews. Is there a special manipulation to do? Or do I need the sVHS cable? (would be weird).
Otherwise, I tried the TRV950E as a converter. The only way I could make the link work through is by recording the analogue signal onto the camcorder tape. I thought it would be easier, am I missing something?
Thanks in advance for your help!
Paul

In my unnEUtered Sony TRV320E Analog to DV passthrough goes like this:
1. Take the tape out of the camcorder
2. Connect the analog device's audio and video to the camcorder's minijack, use the S-Video jack for video if the output device supports S-Video
3. Put the camcorder into VTR-mode
4. Select A/V->DV out: ON, in VTR mode's menu choices
5. Disable the info display on the the camcorder by toggling its DISPLAY button
6. Put iMovie (or other DV application) to the Camera Mode
The analog image should now appear on the camcorder's screen as well as on the iMovie's screen.
Note that if you have a tape in the camcorder, you have to put the camcorder's VTR into REC mode (you may pause the tape) but this is not advisable because it produces wear to the tape.
* Note that the SCART which comes with the European nEUtered TRV320E camcorder is Out-only.
Notice that some analog to DV passthrough converters (like the TRV320E) don't work in iMovie HD 6.0.2 like they do in iMovie 4.0.1:
http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#analogDV

How does one best make a button to jump around a PDF (interactive) on an ipad.

I have been trying to figure out how to make an Interactive PDF document that could be loaded into an iPad.
We need one: Buttons to jump around the document for navigation purposes. A button would be eaiser to press on an iPad and if each page is designed the same people will know where "main menu" and the subsection buttons are and should be able to bounch back and forth in the document pretty easily.
It seems that with Indesign CS5 you can make goto buttons but when you try and export them... Acrobat will not honor the goto commands so your left for dead.
Yes it will work nicely with export to SWF and work marviously with a flash output but there's no way to look at flash content on the iPad.
So I've found stuff on the web talking about bookmarks and text anchors but it seems like there are limitations with that as well.
What confuses me further is when 3rd party PDF viewers claim they can use goto page number.
http://www.appligent.com/talkingpdf-pdfontheiphone
see the discription for GoodReader. (it has and ipad version)
So is this an indesign issue? An Acrobat 9 pro issue? I don't get it.
It seems so simple. Just want to button that would take you to say page 1. and on page 1 have a button that takes you to page 4.
Does someone have any advise on how to create a PDF that could do this?
SWF is very cool. But unfortunatly Steve J's personal vendettia with Flash is making it hell for simple users....

woodwing seems to have a nice toolset to make it easier for sure... but I'm not sure that is the correct direction for
us. As we don't want to have to submit anything to Apple. Our needs are for internal use only and we would not be creating content for the public.
I don't follow the ePup process fully... PDF's we can load right onto the iPad. It's a real shame about flash not working as we can make some very slick flash content right out of indesign with little effort. (maybe the direction should be a Flash to HTML5 converter? Goto page commands assigned to buttons would be wonderfull if they worked but when you export the doc to PDF Acrobat complains that it is not compatible. When we export to flash it works like a charm on a PC.
Haven't found a good gudie for bookmarks yet... and if that would give us buttons on each page to move the user back and forth through the document.

How does one actually embed the code using Dreamweaver

I have created the form in Formscentral, copied the embed code, but I can't get it to actually appear in a web-page using Dreamweaver. Can someone point me to an instructional article on this procedure?

In DreamWeaver go to Code view, position the cursor where you want your form and paste the contents of the clipboard. Then go to Design view and click on the Live View button. You should now see it embedded in your HTML file.
Hope that helps
Randy

HT4314 i'm new and i don't know haw to access a new crossword puzzle, the one i already completed keeps coming up...how does one get to the next puzzle?

in crosswords how does one advance to the next puzzle please, thanks

Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

How does one get Time Machine out of a "Preparing to Backup" loop to actually doing a backup? thanks, AR

How does one get Time Machine out of a "Preparing to Backup" loop to actually doing a backup? thanks, AR

Hi..
Thanks for the reply..
My original I Phone 5 was running IOS 6.12
My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
but it doesn't help me..
Steve

How does one make CC the default out of ACR rather than CC 2014?

I installed the updates for PS CC and PS CC 2014. Now, when opening a file out of ACR, it defaults to CC 2014. How does one set things so that it opens in CC rather than CC 2014?

GB has two "modes": In "musical time" the units of the timeline are bars and beats, in "real time", they're seconds. You can switch between them by clicking the clock/note symbols near the play button.
"Snap to grid" only works in the musical time mode.
An Apple Loop is always supposed to be an integer number of measures long. So if you're in 4/4 it can be 1, 2, 3 ... measures (which is 4, 8, 12 ... beats) long. Since the concept of loops is to be in rhythm with the beat of your song, this makes sense - so it is assured that the "one" of a drum loop, e.g., always sits on the "one" of a measure.
If your loop is only half a measure long, you can double it to make a full bar. If your loop is not in rhythm at all with a beat - well, then it probably doesn't make sense to turn it into a loop that adjusts to the tempo in the first place. You can still turn it into a "static" kind of loop.

In the new Pages, how does one send an image to the background (and make it selectable)?

How does one send an image to the background in the new Pages and how does one make it selectable?

Also why don't TEXT to Speech short cuts established in system preferences work in the new Pages?
I am confused (and not completely happy)

HT1212 my niece lockup her ipod and don't remember password and/or it dont work now   there no access to setting to wipe and reformat how does one do this

How does one redo a 8GB ipod? My neice has one and lock it with a password and now password dosen't work and/or she forgot it! It give message ipod is diable! connect to Itunes! I've done that and the device doesn't showup in itunes, keep getting a message that password is needed! But there no input for that on the phone either! So I thought I would just dump and reformat and reinstall software, but I'm using windows and the device dosen't show up! Anyone!!!!! got a answer!
Thanks

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers !

How does SUM actually works

Hi,
I'm puzzled by how SUM actually works.
I've got a table with the following fields:
SET_OF_BOOKS_ID NOT NULL NUMBER(15)
SUMMARY_CODE_COMBINATION_ID NOT NULL NUMBER(15)
DETAIL_CODE_COMBINATION_ID NOT NULL NUMBER(15)
TEMPLATE_ID NOT NULL NUMBER(15)
LAST_UPDATED_BY NOT NULL NUMBER(15)
LAST_UPDATE_DATE NOT NULL DATE
ORDERING_VALUE NOT NULL VARCHAR2(25)
Using the below, I was able to get the total value of all the ordering value.
select sum(ordering_value) from gl_account_hierarchies where set_of_books_id = 1 and summary_code_combination_id = 1147;
I was happy that I could get the total value but am puzzled as ordering value is of data type VARCHAR2.
Is sum(ordering_value) a VARCHAR2 or a NUMBER then?
I did a simple test, inserting the following record:
insert into gl_account_hierarchies values(1,1024,1,2,3,'11-APR-2002','xyz');
After committing, I double check by using the following statement:
select * from gl_account_hierarchies where last_update_date = '11-APR-2002';
and was able to retrieve the newly inserted record.
But when I did another check with the following statement:
select * from gl_account_hierarchies where set_of_books_id = 1 and summary_code_combination_id = 1147;
I wasn't able to retrieve the newly inserted record.
Why is that so? How does SUM actually works? Is the output of SUM a VARCHAR2 or NUMBERIC value?
thanks in advance!!
Yu S.S

SUM() gives a number.
What you have come across is an implicit data conversion. Basically the SQL parser doesn't reject your query as being syntactically invalid just because you're attempting a mathematical function on a non-numeric column. Instead when you execute your query SQL substitutes this
select sum(to_number(ordering_value)) from gl_account_hierarchies where set_of_books_id = 1 and summary_code_combination_id = 1147;
If you want to check this create a view
create order_value as select sum(ordering_value) sum_val from gl_account_hierarchies ;
and then desc it.
Cheers, APC
SUM(

How does one do a two way contacts sync between an iphone and outlook? Most of the community has answered as this to be "always so", but it does not work! Changes made on outlook get done in my iPhone, but it does not work the other way around!

How does one do a two way contacts sync between an iphone and outlook? Most of the community has answered as this to be "always so", but it does not work! Changes made on outlook get done in my iPhone, but it does not work the other way around!

Close the tab the web page is loaded in (command - W).

How does one ensure an automatic save function every 5 mins for any document you are working on. Yesterday I erased a doc I was on and had to rework from the start.

How does one ensure an automatic save function every 5 mins for any document you are working on. Yesterday I erased a doc I was on and had to rework from the start.

Well I understand that auto save is already present and saving your doc every 5 mins. But then why do you think, this did not happen yesterday in the following case?? I wrote one page of a long document and wanted to format it before proceeding. I selected the part to be formatted and instead erased it. I could not find that page again. I had to rewrite the matter.

TS3406 I have an Iphone 4s. When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone. How does one resolve this phone issue?

I have an Iphone 4s. When I make a phone call I cannot here the phone ring or the person on the other line pick up, unless I go to speaker phone. How does one resolve this phone issue?

Hi there MitchR12,
You may find the troubleshooting steps in the article below helpful.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
-Griff W.

How does one actually make a subscription work? Please Adobe accept my cash!

Similar Messages

Maybe you are looking for