How does one assign a user to several groups?

I am a student learning Databases, Oracle to be exact, and am trying to install a developer's copy on my MAC G4 running OS X 10.4.11. To do this I need to assign user oracle to several user groups. Trouble is, although I know UNIX fairly well I don't know Sys Adim commands well at all. Can am one help with this one?

Thank you for your posting, however I did try this before I posted here, can assign a user to one (1) group, but can not figure out how to assign a user to more than one (1+) group. That is the root cause of my problem. Do you know how to assign more than one group? Again thank you for your input.

Similar Messages

How does one create a user with a null password in iManager?

I'm setting up LDAP authentication and need to create a user with a null password.
If you do not put a password in the password field when creating the user in iManager, a message pops up stating, No password has been defined for this user.
You are given a choice of:
Allow user to log in without a password
- or -
Do not allow user to log in without a password
If you choose Do not allow user to log in without a password, there are no complaints.
When I look at the properties of the newly-created user, however, I note that the "Require a password" checkbox is not filled in.
That would imply that the answer to the question posed during the user's creation is moot; either answer produces a user that can log in without a password.
I can then assign the Common Proxy password policy to the user, which does not dictate a minimum length for a password.
From that point forward, any attempts to leave the password field blank in iManager results in another pop-up message stating:
"Failure to enter a password will allow the user to login without a password."
That implies that no password exists for the user, as opposed to a null password.
Is that correct or are the public and private key for the user object still generated?

If you do not specify a password, which is what happens when you select
the 'Do not allow user to log in without a password' option initially, the
user cannot login. A user with no password (meaning no password exists at
all, similar to a 'null' in programming) cannot login with a password
because, of course, they do not have a password.
If you specify a zero-length string as the password you are effectively
(and usually) creating a proxy user, for example to be used for the LDAP
service in eDirectory, and this user can login typing in a password (since
typing would imply one or more characters) but nevertheless there IS a
password, but it happens that it is zero-length, so typing nothing for the
password IS submitting the correct password. This is the option carried
out by eDirectory when you choose, 'Allow user to log in without a
password' (the prompt is a little misleading with its "without a password"
phrase).
Once you assign a UP policy you are telling the system that there SHOULD
be a password on the user (and with common proxy there definitely should
be, probably a strong one at that) so the only option now is whether or
not the password is zero-length or longer. Obviously longer is the
correct option for security reasons.
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

How does one accept end user license agreement?

Despite installing Adobe XI I am repeatedly told to launch Adobe reader and accept end user agreement, quit and re-launch browser but there seems to be no way of doing this! Meanwhile it is impossible to read pdf files.

Can't click Accept | Acrobat, Adobe Reader
Mylenium

How does one assign change bars to the contents of an anchored frame?

Assigning change bars to text in FrameMaker 10 appears to give inconsistent results. Sometimes I can select the contents of an anchored frame and assign a change bar to it. Other times, only the marker is assigned a change bar and not the contents of the anchored frame.
Also, sometimes I can select a table and assign a continuous change bar to it. Other times, a separate change bar is assigned to individual rows of the table.
Are there any workarounds for this inconsistency?

.

How Does One Delete Cyrus User Accounts?

When I try to use cyradm, it asks for an IMAP Password, which I don't know. I suppose it's for the _cyrus account? Should I change the _cyrus password?

See the line that starts with admins in /etc/imapd.conf.. You want to login with the username and password of the mail admin account.. For example, if my admins line in /etc/imapd.conf had the user name mailadmin, I would login with the following:
sudo -u _cyrus /usr/bin/cyrus/admin/cyradm localhost --user mailadmin
The first password is because of the sudo. The second is the passwd of the mailadmin account (whatever yours is called)..
If you do not know that password, you will need to change it...
You can still not delete once in.. The ACL doesn't have delete privs by default.. Here is the command to add all privs to the mailadmin account..
sam Other\ Users/p10002 mailadmin all (this assumes you are already logged in)..
Hope this helps..

Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?

Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?

Hi there
You would need to purchase a seat for each user.
What you currently have is 1 seat = 1 user.
Kind regards
Bev

How does one delete previous data on iphone as user has changed

how does one delete previous data on iphone 4s as user has changed

I would do these things
To wipe phone
Turn off imessage in settings/messages
Turn off Facetime in settings/Facetime
Delete icloud account in settings/icloud
Erase all data and settings in settings/general/reset
Get the previous owner to delete the phone from their profile in https://supportprofile.apple.com if they registered the phone there

How does one prevent a column in a database from being visable to end users

I have a password column I would like to hide by default from any one with query access. How does one do this?

If you're on 10G you can use encryption.
First create a wallet en create the master encryption key with:
alter system set encryption key identified by "<secretpwd>";
Then you can encrypt a column in a table with the command:
alter table <tablename> modify <column> encrypt;
If the wallet is open you can query the column. If the wallet is closed you cannot query the column ....
Grtx

How does one pay their bill

I have been a Verizon wireless customer for10+ years and switched to FIOS internet and TV a few years ago. When I first switched I set up the one bill account, where it then took me over 8 hours on the phone to finally get FIOS and wireless Verizon to acknowledge each other exists. All went well until thismonth's billing cycle. When I went to log into my account, the system decided to make things more convenient for me by no longer taking my old user ID and password, but giving me the opportunity to get a new user name and password. All I needed to do was enter my home phone land line number, which I don't have a land line, or my account number with the new user ID which I can't get because I can't log in to take advantage of this wonderful opportunity. After spending over an hour on the phone listening to the electronically generated drone of the voice telling me all agents were busy, mind you this was starting at 8:45, 15 min prior to the go time, and listening to the wail of the Kenny G music, the agent told me that it wasn't their department. After another 40+ minutes of aural torture, I gave up, went out and shot several furry creatures and contemplated the meaning of life. How does one pay their bill under these circumstances? I even tried to use the 969 phony home phone number they gave me. What are my options and yes, in one month I will be canceling anything to do with Verizon TV and internet.

Sorry you are having difficulty, an agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information to help you resolve your issue.

How does one create their own interpolation

I am currently working on a tile-based environment in which the user controls a tank. I have been attempting to use interpolators to smooth out the movement between tiles, but I have had a lot of trouble acheiving the desired effects. From what I have gathered from various posts is that the interpolator classes are only useful for repeating animations (please correct me if this statement is wrong).
My question then is:
How does one create their own or methods which simulates the interpolation behavior; I am particularly interested in the PositionInterpolator for translating the missles fired by the tank.
I attempted to do this several times, but I have failed. Here is one of my attempts:
public void fire()
     show(); //show the missle geometry
     int TRANSLATION_TIME = 1000; //blast alive for 5 seconds
     float DISTANCE = 20.0f; //missle travels a distance of 20 units
     //interpolate path
     long startTime = System.currentTimeMillis();
     long endTime = startTime +TRANSLATION_TIME;
     long interval = endTime - startTime;
     float translationPercent;
     float lastTransPercent = 0;
     float dist;
     Transform3D translate = new Transform3D();
     while(System.currentTimeMillis() < endTime && !collision)
     interval = System.currentTimeMillis() - startTime;
     translationPercent = (float)interval/TRANSLATION_TIME;
     dist = DISTANCE*(translationPercent - lastTransPercent);
     lastTransPercent = translationPercent;
     translate.setTranslation(new Vector3f(0.0f, 0.0f, -dist));
     interpolate(translate);
public void interpolate(Transform3D translate)
     Transform3D t3d = new Transform3D();
     missleTG.getTransform(t3d);
     t3d.mul(translate);
     missleTG.setTransform(t3d);
What happens using this code is that the missle just waits at its initial location until the TRANSLATION_TIME has passed, and then jumps to the final position -- the missle does not smoothly translate to the final location. Are there any explainations out there for this behaviors.
-Thanks in advance

Hi,
I'm also working on a game environment where the user can move around in a spaceship and fire missiles etc...
I haven't looked much at interpolators, but I use Behaviors for everything I need to move/rotate/scale...
You can for example create your own behavior (by extending the Behavior class) and set it up to move the missile when you press a specific key, or when any other kind of event takes place...
You should check the documentation for the Behavior class.
Hope this helps...

HT1918 How does one organise the apple ID so that one uses the same email address to have an account on both the UL and Belgian itunes stores?

I have in the past created an Apple ID for use with the UK itunes store, because I want to read in English. If I sign in it seems that this ID will only allow me to purchase from the UK store. But I live in Belgium, so I can't download from the UK store. So I tried to create an apple ID for the Belgian itunes store. But I want to use the same email address as I used for the first apple ID I made (because I'm fed up of having to remember which email address I used for which account). When I tried this, I just get a message saying that the email address is already in use for another account (which I know, because it's me who made that account). Does anyone have a workaround for this?
cheers
Andrew

I have tried again using the same password. and it still doesn't work.
I'm presuming you went ahead and set up a new Apple ID, yes? Using the same password in more than one Apple ID has worked for me in the past, but I haven't tried it in a while so the tightened security may have changed that. You could use the same password but add "-UK" and "-BE", or something like that, to make it easier to remember.
I understand what you mean about losing the ability to deal with UK purchased stuff, but this is becoming so inconvenient that I do want to delete that UK apple ID account. I have looked everywhere I can think of on the apple website (apple id, itunes, support etc) and I can't find a link/eplanation/contact point that deals with deleting apple ID and itune store accounts. Surely this must be possible?
It's possible, but Apple is very reluctant to do it, and it's not something a user can do on their own. It would be better to just stop using the UK account rather than trying to get it deleted. Just remove your payment information and there should be little reason to have the account deleted. If you really want to try, though, you'll need to send a message to iTunes support specifying that you want the account cancelled.
On a completely different matter, I have bought my son an ipod touch. But since he is younger than 13 years old, how does one go about using the itunes store to get music onto his ipod touch?
You would need to buy tracks for him; he's too young to have his own iTunes Store account. To control what gets synched to his iPod, this should help:
http://support.apple.com/kb/HT1495
Regards.

Firefox update installs, but does not apprearon screen, or task manger yet is running what is going on and how does one fix it?

I installed the update Mozilla Firefox 28. It was suppose to launch upon completion. it did not appear on the monitor screen, nor the task manager, but was running; for when I attempted to install the older version again it, it said that Firefox was running and needed to be turned off.
I restarted the computer and tried opening Firefox, with the same results.
After restarting again, I attempted to reinstall the update, with the same results taking place.
I attempted to uninstall Firefox and install the new version. The same results took place.
In the past, I could install Firefox 27 update, only now I can't for the same thing takes place. Past a certain version (19), this event takes place, but 19 and older can install it with no problems.
I checked Firefox troubleshooting information. All was normal. I checked my firewall. Again, all was normal. Tried Firefox reset. Did not help. Tried with my firewall disabled. Did not solve the problem.
Ran a virus check (deep) no viruses. Checked my computer system. No errors.
I can install updates for my other programs, even install new programs; just not Firefox.
What is going on and how does one fix it.

Hi Amseeking,
Thank you for your question. From your description, you tried to install the 28 update from a version 19 installation. Did you install a fresh install of 28 successfully? Where the name of the file is"Firefox Setup Stub 28.exe"? This is what is sound like happened. When going to about Firefox and searching for updates it installs over the current installation. However if Firefox was already running, there are more than one installation.
Updating from version 19 to 28 would not be a problem. However the user data from your previous version would have to be imported to the new installation if you have more than one install on that computer.
An easy way to tell is to search for Firefox in the Start menu to see if more than one icon shows up in the search results.
I hope this helps.

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac. Now I can't remove her e-mail address from Facebook. It was suggested to me that I try clearing temporary files from Safari but I can't find

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6. Now I can't remove her e-mail address from my computer. When I open Facebook her address shows in the user button. I do not have a Facebook account. It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this. Are temporary files the same as the cache? It also was suggested that I try clearing Safari cache. How do I do that?

Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.

How does one drag a song to a new album?

How does one drag a song from one album and drop it into another album?
Many of the mp3 files that I use are ones that I create myself for my students. It would be great if I could drag them into the correct album without having to type in the information (very tedious).
I am new to Mac from Windows and I can't discern how to accomplish re-assigning albums in the manner that I was able to previously using Windows Media Player.
Any suggestions or perhaps different workflow suggestions?

I'm a high school music teacher and a lot of the tracks are student-created (or instructor-created). It has always been easier for me to leave the mp3 tag "unknown" and then drag them to the appropriate album in Windows Media Player.
I actually took something from your reply that I think will work well. By adding newly created files to a playlist, I could select them and then edit the tag data every few days by selecting all of the items in the playlist (I think that will work!).

HT201991 How does one write a review for an app?

I would like to write a review for an app I bought from the App Store.
"Locate the item that you would like to write a review for."
Where? In the App Store via the internet (e.g. on my iMac), OR via the App Store button on my iPad Mini?
"Click "Write a Review" in the Customer Reviews section."
How? I could find no active link associated with the Customer Reviews section once I had located the item for which I wanted to write a review.
So the question remains "How does one write a review for an app?" … and, so far as things stand, the instructions provided in the page <http://support.apple.com/kb/ht3928> are, as far as I can tell useless. Certainly, the Apple website and associated instructions have become, for this long-time user, more akin to Microsoft Windows in their impenetrable lack of intuitive, user-friendly ccharacter.
Oh yeh. To add to my 'disgruntledness' … How come there is no iPad Mini option in the Product drop down below?
Where is Steve Jobs when you need him?!

I have been having this issue for months, now--at least 3-4. I updated my credit card info on my account, thinking maybe that would do it, but NOPE--can't review a single thing I've ever purchased in iTunes--not from my iPhone 5, PC or iPad 2. Ridiculous, at this point...just remove the ability to review at all, if this is how it's going to be. SO frustrating.

How does one assign a user to several groups?

Similar Messages

Maybe you are looking for