How does one Change Memory the dividers(1:1 to 5:6, etc.) on the K8T Neo2-F?

I have the 3.3 Bios and so far overclocking is a bit of a let down as most controls seem to be quite useless, I can go to about 226Mhz @ 1:1, Which with a 3200 90nm cpu is about 2.26GHz max and I'd like to go faster, Like maybe 2.4Ghz to 2.6Ghz or so, But I don't want to buy better ram right now. My ram is a Buffalo Hynix 256Mb PC3200 Dimm. I've went so far as to max out the voltage controls, I Changed the HTT rate to 800Mhz speed and I've gotten breifly as high as 2.3Ghz and no farther. :frown:    I mean How do I set the Memory to 5:6 or whatever?

You may want to ask this in the Overclockers area. This area is mostly for standard problems. The overclockers area is for those issues.

Similar Messages

  • How does one change the font size for folders and/or file lists in the Bookmarks Library?

    How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
    Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
    As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
    With regard to font size,
    1. there is no “Edit Bookmarks” or like option to edit the list in this version
    2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
    3. expanding the browser window has no effect on font size
    4. “Preferences” settings for font size has no effect in that window either, including advanced settings
    5. “Help” offers none that I can find.
    Can any of you Help?!?

    Maybe this extension helps:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  • How does one change ownership of event?

    How does one change ownership of an event?
    We are running OCS 9.0.4.2 on redhat enterprise linux 3.0
    I have a calendar entry which I got from:
    mySess.fetchEventsByRange(Api.CSDK_FLAG_STREAM_NOT_MIME | Api.CSDK_FLAG_FETCH_EXCLUDE_DAILYNOTES |
    Api.CSDK_FLAG_FETCH_EXCLUDE_DAYEVENTS, hand, in_start, in_end, eventProp, result);
    BEGIN:VEVENT
    UID:20050620T151524Z-505dd-1-7af6ed32-Oracle
    ORGANIZER;X-ORACLE-GUID=FEA199DDB9763627E030378E793341C1;CN=old owner:mailto:old.owner@email
    DTSTART:20050801T120000Z
    DTEND:20050801T220000Z
    END:VEVENT
    So now I'm trying to save the event under the new owner using this:
    mySess.storeEvents(Api.CSDK_FLAG_STORE_MODIFY,event,result);
    where event reads as follows:
    BEGIN:VCALENDAR
    VERSION:2.0
    PRODID:-//ORACLE//NONSGML CSDK 9.0.4.2//EN
    BEGIN:VEVENT
    UID:20050620T151524Z-505dd-1-7af6ed32-Oracle
    ORGANIZER;CN=new owner:mailto:new.owner@email
    DTSTART:20050805T120000Z
    DTEND:20050805T220000Z
    END:VEVENT
    END:VCALENDAR
    And i've run mySess.setIdentity to change to the old owner and new owner with no success?
    Please how does one change the owner of an event?

    The Calendar Sdk doesn't allow you to change the ownership of an event. (ORGANIZER value).
    Regards,
    Jean-Philippe

  • Safari on Windows. How does one change default spelling dictionary?

    How does one change the default spelling dictionary for Safari on Windows? For the Mac, it changes in response to the default locale, but on Windows, it just sets to American English and you cannot change it anywhere I can see. All my locale information in Windows is set to UK English.
    In fact on some websites, like this one, the spelling checker seems to be disabled! I'm on Windows 7 64-bit, BTW, running Safari 5.1.7
    Message was edited by: Grant Wray

    I think I just found the answer (though I don't know why the interface is buried this way). Find a word that the American spell check is flagging, right click on it, select Spelling and Grammar, and then select Show Spelling and Grammar. Make sure that the language listed at the bottom says British English (not my choice of what to call it, so please don't blame the messenger).

  • HT4314 i'm new and i don't know haw to access a new crossword puzzle, the one i already completed keeps coming up...how does one get to the next puzzle?

    in crosswords how does one advance to the next puzzle please, thanks

    Re: That garbage is unreadable.
    If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
    Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
    I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

  • Sorry if tis is naive.  I have just bought my first iPad Retina Display.  I have WiFi at home but it has taken ages for me to connect as I needed all sorts of codes, passwords, detauils etc.   How does one connect to the web (Google) when one is out and a

    Sorry if this is a bit naive.  I have just bought my first iPad (Retina Display).  I have WiFi at home but it has taken me ages to get on-line as I needed all sorts of codes, passwords, numbers etc.
    How does one connect to the web (Google) when one is out and about?
    Thanks

    haha, You're welcome
    Maybe these links will be useful
    ipad manual/user guide
    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
    ipad support page
    http://www.apple.com/support/ipad/
    ipad assistant
    http://www.apple.com/support/ipad/assistant/

  • How does one tell if the J2EE services are running with Unlimited

    How does one tell if the J2EE services are running with Unlimited
    security? We have applied the export Policy to the server but we do notsee any reference to it running with it. .we apply the Service packs SAP now upgrades that JAVA as well . Do that process treat the JAVA
    lib/security area correctly.

    Just out of curiosity... Is there something you do
    like about Mac/Apple?
    To answer your question: no, not really. However, the points that I made here were about Safari and accompanying utilities, not about Apple in general.
    If it makes you feel any better, I am just as, or even more, critical of Micro$oft as the occasions arise...Windoze Vista is the most recent occasion and has given sufficient reasons and opportunities to vent my spleen that I actually have eased up on Apple, politicians, nut-case religious extremists, cell phone owners, and the Department of Homeland Paranioa, etc., due to an exhaustion of creative energy.

  • How does one know if the latest Camera Raw is included Photoshop CC?

    How does one know if the latest Camera Raw is included  with Photoshop CC?

    Help>About Plug-In>Camera Raw...

  • How does one turn off the appletv

    How does one turn off an Apple tv?  I think it's 3d generation.

    If you are at the top level "Home" page, press and hold the Pause Button and AppleTV will shut off after a few seconds.
    If you are not yet at the Home page, you can repeatedly press the Menu button to move back up there, or even better press and hold the Menu button to jump back to the Home page no matter how deeply down you've burrowed.
    I find it satifying to turn it off when I walk away, but don't know if there's any real advantage compared to just letting it time out as suggested by Kappy.

  • How does one make CC the default out of ACR rather than CC 2014?

    I installed the updates for PS CC and PS CC 2014.  Now, when opening a file out of ACR, it defaults to CC 2014.  How does one set things so that it opens in CC rather than CC 2014?

    GB has two "modes": In "musical time" the units of the timeline are bars and beats, in "real time", they're seconds. You can switch between them by clicking the clock/note symbols near the play button.
    "Snap to grid" only works in the musical time mode.
    An Apple Loop is always supposed to be an integer number of measures long. So if you're in 4/4 it can be 1, 2, 3 ... measures (which is 4, 8, 12 ... beats) long. Since the concept of loops is to be in rhythm with the beat of your song, this makes sense - so it is assured that the "one" of a drum loop, e.g., always sits on the "one" of a measure.
    If your loop is only half a measure long, you can double it to make a full bar. If your loop is not in rhythm at all with a beat - well, then it probably doesn't make sense to turn it into a loop that adjusts to the tempo in the first place. You can still turn it into a "static" kind of loop.

  • How does one change library from 1,5 to 2,0?

    How does one transform 1.5 photo library to 2.0 library within Aperture 2.0?
    Thanks!

    Mitch Aunger wrote:
    and of course you have a backup of your library before you start... right???
    Of course - everyone uses Time Machine, right ?

  • How does one change the date format for PlayMemories Home folders?

    I am using PlayMemories Home Version 2.0.00.11271 and have many folders within it which contain only photographs imported from my Sony DSC-H9.  Unfortunately, PlayMemories Home insists upon dating all folders in a month/day/year manner; and this makes little sense if one wishes to have the folders listed in logical chronological order.  How can I change the date format to year/month/day?  Changing the name of each folder, one by one, will take a very long time!  Your helpful advice in this matter will be greatly appreciated.  Thank you. System information:
    Operating system: Microsoft Windows XP Professional
    Service pack : Service Pack 3
    Memory: 1.5 GB
    Processor:         Intel(R) Pentium(R) M processor 1.86GHz
    Max. clock speed: 1.86
    Manufacturer: IBM
    Model: 1847W76
    System language setting: English (United States)
    User language setting: English (United States) 

    I too thought that the folder naming format was obviously wrong and couldn't find a way to change it. I do agree that placing photos in folders according to when they were taken is a great idea. I had been considering writing some software to do just that. After discovering that PlayMemories does it, I had it re-import all my photos. Then I wrote a small Perl script to rename all of the folders into year-month-day format. Included here is the Perl script. It only acts on a single folder - use it on the root folder where all the PlayMemories folders are. It will rename all folders currently in a month-day-year format. I used it without problems but of course there is no guarentee that it is error free. This should work with any common version of Perl. Tom # There should be one command line argument: the directory to act upon
    if ( scalar(@ARGV) == 0 ){
     print "Usage: RenameDirs <dir>\n";
     print " Where dir is the directory containing the directories to rename.\n";
     exit;
    $mydir = $ARGV[0];
    chdir $mydir or die "Couldn't chdir to $mydir: $!";
    opendir(ROOTPHOTODIR, ".") or die "Failed to open the pictures directory $mydir: $!";
    @allphotodirs = readdir ROOTPHOTODIR;
    closedir ROOTPHOTODIR;
    foreach $dir (@allphotodirs) {
     if ( -d $dir ) {
      print "$dir is a directory";
      if ( $dir =~ /^(\d{1,2})-(\d{1,2})-(\d{4})$/ ) {
       print " and has the proper format: month $1 day $2 year $3 and will be renamed to ";
       $newname = sprintf "%4u-%02u-%02u", $3, $1, $2;
       print "$newname\n";
       rename $dir, $newname or die "failed to rename $dir to $newname: $!";
      else {
       print " but is not of the proper format\n"
     elsif ( -f $dir ) {
      print "$dir is a file\n";
     else {
      print "$dir is neither a directory nor a file\n";
    }

  • How does one change the folder to which scanned images are saved?

    Using a CanoScan 9000F Mark II scanner
    Using the ScanGear driver software that came with it
    Right now every time I scan something, it is automatically saved in "My Documents", and I have to drag and drop the file where I really want it to go. How do I change it so that the file is saved where I want it to go in the first place. Also, it is automatically assigning a file name so that I have to go to the file and change that to what I would like it to be too. How do I make it so that I can name the file before it gets saved. Neither do I see where it gives me the option to choose the format in which the file is saved; it is saving the files automatically as JPG, but I would like to save them as TIFF or BMP.
    These seem to be very standard options; so I don't know why I'm finding it so hard. I must be blind or something.
    Thank you for your time and assistance.

    Hello barbarossa,
    Great question!  You can change all these settings through the My Image Garden software.  The exact procedure will vary depending on the version of Windows you are using.
    If you are having any difficulty locating this software, feel free to visit the link below to let us know your operating system and we can follow-up with step-by-step directions.  Thanks! 
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How does one find out the database name , service name in a database

    hi,
    how do u find out the database name , service name , SID in a database.
    Please reply.
    Thanks ,
    Regards,
    RC

    This particular information is available in the view V_$PARAMETER owned by SYS. But you can also login with Server Manager as user INTERNAL and run:
    SHOW PARAMETERS
    The entries pertaining to the naming of the database are:
    1. db_name
    2. db_domain
    3. db_name
    4. instance_name
    5. service_names
    GLOBAL_NAME is a static (not changing) Data Dictionary view which has just 1 attribute (column) called GLOBAL_NAME.
    When you run:
    select GLOBAL_NAME from GLOBAL_NAME;
    You are returned the full global name of the database, i.e. the db_name and the db_domain joined together by dot (.) For e.g. if your db_name = mgmt and db_domain = tech.co.in, then your global_name will be MGMT.TECH.CO.IN.
    Ciao.
    null

  • How does one change the name of the home folder?

    I would like to change the name of the administrator and home folder on one of my computers. How is this accomplished?
    I'd be most grateful for some help with this.
    Thanks.

    Macworld | Changing the short username in Leopard. Use the last procedure, "The Full Monty."

Maybe you are looking for