How does one clear Custom Views (Administrative Events) in the Event Viewer?

Windows Logs and Applications and Services Logs have a "clear log" option; however, I am puzzled how to edit/delete Administrative Events?Eighter from Decatur, county seat of Wise (of course it's in Texas)

Ronnie Vernon said: Hi p010ne
The Custom View / Administrative Events is a compilation of all the other event logs in the Event Viewer.
Entries in this log will be removed when the log where the event originated from is cleared.
Hope this helps.
Ronnie Vernon MVP
I thought that was the case; however, I cleared all the other logs! This is an example of an entry in this log: Log Name: Microsoft-Windows-Dhcpv6-Client/AdminSource: Microsoft-Windows-DHCPv6-Client
Date: 1/17/2009 7:52:33 AM
Event ID: 1001
Task Category: Address Configuration State Event
Level: Error
Keywords:
User: LOCAL SERVICE
Computer: Windows7
Description:
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x000129F558C5. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
   <Provider Name="Microsoft-Windows-DHCPv6-Client" Guid="{6A1F2B00-6A90-4C38-95A5-5CAB3B056778}" />
   <EventID>1001</EventID>
   <Version>0</Version>
   <Level>2</Level>
   <Task>3</Task>
   <Opcode>74</Opcode>
   <Keywords>0x8000000000000000</Keywords>
   <TimeCreated SystemTime="2009-01-17T13:52:33.858398400Z" />
   <EventRecordID>202</EventRecordID>
   <Correlation />
   <Execution ProcessID="1088" ThreadID="864" />
   <Channel>Microsoft-Windows-Dhcpv6-Client/Admin</Channel>
   <Computer>Windows7</Computer>
   <Security UserID="S-1-5-19" />
  </System>
  <EventData>
   <Data Name="HWLength">6</Data>
   <Data Name="HWAddress">000129F558C5</Data>
   <Data Name="StatusCode">121</Data>
  </EventData>
</Event>
When I search for "Microsoft-Windows-DHCPv6-Client" I do not find that file?
OK, I found the entrys in the Microsoft section (DHCPv6-Client) and am able to clear them there!
Eighter from Decatur, county seat of Wise (of course it's in Texas)

Similar Messages

How does one loop playback of small selections within the timeline?

How does one loop a selection of footage from within the timeline? I'm trying to edit students' tapping hands and pencils on desks into small timed chunks that will play back as seamless loops and I need to be able to slowly shorten or elongate sections of footage as it plays and repeates until the loop matches the timing of the song we are making. I'm using PE8 and can't seen to find an easy way to do this. Surely there is one! Is there?

I appreciate the help everbody, but It looks like I didn't state my question effectively. Let me try again.
It will be easier if I explain what it is I am used to. This is what I need to know how to do in PE8, because the school in which I teach AV has chosen PE8 for my classes and won't let me install anything else.
In Sony Vegas - all versions, you can click and drag to quickly make a selection of video and audio. You can do this while video is rolling and you can then choose to have your A&V loop within this selection. I have seen replies on this forum where this feature within Vegas was treated as if it were a dumb thing. It's not dumb once you realize what it can be used to do for you. While continuing to loop within your slelection, you can move this selection throughout your timeline, rough tuning where you want your loop to be. If your loop needs to be exactly 66 frames, for instance, you could first set this selection at 66 frames and then move it up and down the timlene until you find the best place to cut. Or, in the case of trying to find where some sound within your selection makes a seamless loop, you can increase or decrease the size of your selection on the fly as the selection continues to repeat.
How do you do that in PE8? If it can't do it, can the full version of Premiere?
Thanks again for the help.
-Chris

New to using Firefox with MAC: How does one save a single jpeg image from the web (as in a right click on a pc?)

New to using Firefox with MAC: How does one save a single jpeg from the internet, similar to using the right mouse click on a pc?

If your question comes about because you have a single button mouse, it's time to visit your local computer store and get a ''real'' mouse for that MAC. I don't "get" Apple, they sell their hardware for almost twice what a comparable PC would sell for - and then they leave out what is probably the most important time saving control, the right-button.
See this for setting the hidden pref for context menus in Firefox, for Mac's.
http://kb.mozillazine.org/Ui.click_hold_context_menus
type '''about:config''' in the URL bar and hit Enter
Pref Name = '''ui.click_hold_context_menus'''
Double-click to Toggle to '''True'''

How does one access custom function in OBIEE RPD for Session Init Block SQL

Hello:
We are using SSO for authentication and authorization for OBIEE, using Init Blocks in the RPD and httpHeader as the source of variables in the Instanceconfig.xml file. (As long as the user is member of one group, the results are fine. However, as soon as the user is assigned to multiple groups, group values become URI-encoded.)
To solve the problem of URI-encoding, we have deployed a function to the DB (ora 10gr2).
The problem I am running into is that when I call the function from an Init Block (Security), OBIEE Presentation Services (OPS) acts as though the function does not exist or is not called.
Initialization String: select group_OBIEE(WEBGROUPS) from dual
("group_OBIEE" is the function that was deployed.)
Testing: Successfully tested the function in PL/SQL as well as using the Test button in RPD.
Reason for the fuction: The function decodes the extra characters using a substr function. SSO uses Shibboleth for Authentication and Authorization.
For example, for our group name, we expect to obtain the following value:
edw:hrdir;edw:findir (2 groups separated by a semi-colon)
However, we are obtaining the following: (Determined via the narrative view in Answers: @{biServer.variables['NQ_SESSION.GROUP']} )
URI-ENCODED<edw%3ahrdir%3bedw%3bfindir>
Please note: There are no such problems when we are passing only a single group value (i.e. edw:hrdir). So, in cases when we pass only for Group for the user, we are able to authenticate and authorize w/o a problem.
Any suggestion on how to call the function or a better way to approach this problem?
Thanks in advance for your help.

You don't need a function to assign the groups in your Init Block. In fact you should not use it. You need to use a standard select and define the Init Block as Row-Wise. This means the BI Server knows the Init Block will return more than one row. You select statement should look like this:
SELECT 'GROUP', YOUR_GROUP_NAME FROM YOUR GROUP_USERS_TABLE WHERE YOUR_USER_ID_COLUMN = ':USER'

How does one get a simple URL link onto the Designer Form?

Greetings:
Thank heavens for small favors, kudos to Adobe for Designer and its basic email functionality.
One annoying thing, I am finding it impossible to put a simple link on the Designer Form. Likewise, if I open the form in Acrobat, the link icon on the toolbar is greyed and unavailable, so I cannot select text and turn it into a link.
I have found that I can make a bookmark with the form open in Acrobat and make that a link to a URL, but I cannot specify the initial view to show the bookmarks open, so there is a very good chance this bookmark/link will never be seen.
The HTTP button help states:
"The HTTP submit button operates like a standard button object with these settings:
Control Type set to Submit
Submit Format set to URL-Encoded Data
Submit To URL set to use the http: protocol."
which doesn't sound like it's meant to function like a simple link, and trying it anyway I get an error message that the url is incorrect.
Any ideas on this?
regards,
stevenjs
"I am but an egg."
--Stranger in a Strange Land

I guess one can't paste html in these posts, here's the code, minus all the html tags, and the brackets for the meta tag, title tag and body tag.
Opening URL in new window from Acrobat.
The Code for the first HTML page.
meta http-equiv="refresh" content="2; URL=Original.pdf"
title New Page 1 title
BODY onload="window.open('startNewPDF.htm', 'newWindow')"
Code for the second HTML page which forces the new document to stay on top.
meta http-equiv="refresh" content="3; URL=New.pdf"
title New Page 1 title
body onBlur="setTimeout('self.focus()',2500)"
By the way, I figured out where to apply javascript to a button. Being new to Designer, I did not see that slender script interface at the top.
James' xfa.host.gotoURL("http://www.yoursite.com",0); does indeed work like a charm. I just selected the button, selected Javascript instead of FormCalc, Selected "click" from the event dropdown, and pasted in xfa.host.gotoURL("http://www.yoursite.com",0); (changing the URL of course).
regards,
stevenjs
"I am but an egg."
--Stranger in a Strange Land

How does one clear duplicate posts of the same item that show at an RSS link?

I subscribed to an RSS link and get duplicate, two identical in content posts for each entry. Is it possible to clear, delete all items or history of the entries/posts that show up at the RSS folder? Thanks.

Yes, I use Live Bookmarks.
This is the RSS http://www.ctech.com/forum/rss.php
Each of those entries at the RSS site show up in my Firefox RSS folder twice. The content of each entry when I go to it is exactly the same. It's not that one is the reply to the original post or anything like that. For instance, see the attached image of the list of items that show up. The highlighted yellow on top is an example. Both of those links display exactly the same original post and replies. Why is that? Is is possible that somehow I'm subscribed twice? Does that make sense? How can I delete the duplicates, or for that matter, clear all those items that show on the list? I just want to see the new ones. Thanks.

How does one clear temp files in Mountain lion?

Computer summary shows a large nmber of temp files. Also, my system is becomeing very slow.
what tool do I use to TUNE UP my iMAC?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How does one clear the Local Storage in Safari 6.0?

I used to be able to delete the cookies in the Local Stiorage folder. But the old path ~/Library/Safari/LocalStorage doesn't exist anymore since the system got updated to OSX 10.7.4 and Safari 6.0. And as ever emptying the cache via the develop drop-down menue doesn't clear the cookies stored in Local Storage.
I am totally at loss, where these cookies are hiding in my system but really want to get rid of them. Firefox is an alternative but it is tiresome to use this browser as it keeps on blocking things I want to do or asking me a little bit too frequently for permission etc. Can anyone explain the Local Storage issue to me please?

hpr3, thanks for your response but you didn't read my post correctly. I am not referring to 'normal' cookies. The ones which are stored under the section Local Storage are special and survive the general 'clear all website data' action via Safari's preferences. I know several people have pointed this out before me. I was able to clear these cookies in the Local Storage folder before but it was always quite a lot of 'clicking through' to be done and one had to go through the Finder via user/library/safari/local storage etc. I recall there was a folder involved named Macromedia as well. But with the upgrade of the operating system and Safari this path doesn't exist anymore.
If you clear the cookies via preferences, then click out of Privacy and back in, you might notice that even though you haven't used your web browser at all, there are still cookies which magically re-appear. And they are tagged as Local Storage.
Now, can anyone else come up with a helpful answer?

How does one become a moderator, administrator, etc?

Not that I want to be one. I am just curious who determines who is moderator (admin, etc.) Is it a vote or appointment or what?
Last edited by life_enjoyer (2013-09-03 05:16:31)

jasonwryan wrote:
if Xyne did not maintain the taco grill properly and to the health and safety standards and this resulted in a build up of gas in the Fellow's Lounge that was then ignited by cactus when, as he is wont to do after consuming said tacos, he lit one of his incredibly noxious farts and this triggered a cataclysmic fireball that incinerated the entire mod team and all of the Fellows--then Allan would assume complete control over the boards. This, unfortunately, would quickly lead to the sort of breakage that Allan is notorious for and therefore would render the whole concept of moderation moot as no-one would be able to post anyway...
I know what you are thinking now. What if Allan was in the Lounge at the same time, wouldn't he be incinerated with the rest of you? Wouldn't you all be one charred ash heap?
Rest assured, this can't happen. Whenever he is in the Lounge, Allan wears a full body kevlar suit. He says that it is for our protection and, given the scenario outlined above, I believe him.
See, when I joined the mod team, I was only expecting to shuffle some forum threads and swing the occasional banhammer. Little did I know that I would soon find myself standing guard against the flatulence-heralded apocalypse of all that is good in this world. As with Ragnarok, the Breakage of Allan foretold in Arch lore is inevitable. Even if I am able to maintain the taco grill as required during my tenure, the responsibility will eventually pass to someone who falters in this task. This weight and many others are borne in silence by the mod team. Do not be so eager to step behind the curtain and know the truth of things. When the time comes, we may call upon one of you to assume this solemn duty, but know this: there is no shame in taking the blue pill. Had I known then what I know now, I may have chosen differently, but I fear that no verbal warning could adequately convey the true horror of being confined to an enclosed space with a devout taco consumer. While you may believe that the life of an Arch mod is a glamorous carousel of never-ending fun, it is in fact a mephitic hell which one suffers for the greater good.
A well-kept secret of the mod team is that TGN actually stands for "taco grill notification", and it is used to alert other mods that the grill is in a critical state. That is why topics are inconsistently TGN'd. We do not take such notifications lightly.
Now if you'll excuse me, I must attend to my duties.

How does one goes on building an Icon with the 'Look and Feel' of an Icon?

Hello everybody, I work as a Graphic Designer for a company that is asking me to create an Icon for a software that we own, I am having trouble as to how do i go building one, I use Illustrator and Photoshop but I am not sure how to give the Icon the 'Look and Feel' of an Icon, the colors look a bit different and so the 'texture' of my vector image. If anyone can explain me or point me to a good website that explains how should I go on building an icon so it looks like an Icon that will be great. I thank you in advance for any reply that you can give me regarding the subject.

don't know what you mean by "look and fell of an icon". You could go to vectortuts.com - it has lots of tutorials on the creation of different icons. Also check hicksdesign.co.uk for their presentations on icon concepts

How does one get a radio station listed in the iTunes Radio Tuner?

Hi!
I am CIO for Head On Radio Network, http://www.headonradionetwork.com
We have a live 24/7 Liberal/Progressive political talk radio stream which may be found at http://server2.whiterosesociety.org:8000/HeadOnRadioHQ and we would very much like to have this listed in the iTunes Radio Tuner.
We produce 60 hours of original programming every week, and also have permission to do a "The Best Of The Mike Malloy Show" in the wake of his firing by Air America, and that is appearing at 10pm ET every weeknight. When we are not live, we replay recent shows from the live stream.
I think that having HORN on the iTunes player would be an asset to Apple.
Who do I contact? Is there some sort of application form?
Thank you all so much!
-Ben Burch
eMac Mac OS X (10.4.6)

Sorry, but there's no mechanism for getting a station added to the iTunes Tuner list. No one outside of Apple knows who's running the server that maintains the list since 3Com shut down Kerbango, the previous host of the list, and for some unknown reason Apple has not provided any way of contacting the current provider or administrator for making changes or additions.
I can only guess why this is the case; perhaps Apple doesn't want to bog iTunes down with potentially a huge list of stations (there are after all hundreds if not thousands of iTunes-compatible streams available) and so only provides a sampling.
You might want to consider listing your station through Live 365 or ShoutCast or another such streaming service. That would get it to the attention of a lot of people.

In iTunes 11 how does one create a gapless CD transition if the CD is already in the library. The gapless playback option is not where it was located in the last version.

I have a large itunes library that I use with Pure music. In the past, I was tagging CDs imported as gapless after the fact. Primarily it tool me a while to learn that I needed to do this for best playback from memory. in iTunes 11, I can see how to join CDs on input but not how to join songs of a CD that is already loaded. Any Ideas?

MartinR wrote:
Changing the drive alone, even if you give the drive the sam name as the previous drive, won't solve it. The mere fact that you moved the folders/files to a new drive makes it a different location. You have to reconnect the media after moving the location.
Not Quite. As an experiment, I created a series of folders on a clean target drive with the same names as on the source drive, then drag-copied the media files for a given project into those folders. I did this with 2 FCE projects and both opened on the new hard drive without the need to re-connect the media. In this case, all of the media was located in a folder at the root level of the drive. Apparently, the FCE application begins its search at the root level and seems to work even though the names of the 2 drives are different.
I may not be as fortunate transferring projects from other hard drives because the directory paths for media will not be the same. Anyway, it worked for this particular case and will save me some time and effort.

HT201272 How does one download movies to an iPad from the Cloud

I purchased three movies in the iTunes store and when the loaded they went to my cloud. For the life of me I cannot figure how to download them to my iPad4. Any suggestions?
Paxofficer

Downloading past purchases from the App Store ... - Support - Apple

How does "search Index/Custom Key" - works out in the BPEL console?

Pls. see subject..
Rgds, Henrik

Use setIndex(value) in java embedding to set index. You can then search using the value you provided.

How does one print using a usb cable on the mg6420?

My Internet connection is down...need to print for new employment! I'm using a MacBook Pro.

As long as you already installed the drivers, when you plug in the USB cable it should automatically add a USB instance of the printer into system preferences (so, if you had the wireless version installed before, you would have 2 options now, MG6400 series and MG6400 series copy 1, or something similar). As long as you select the new instance of the printer you should be able to print via USB fine.

How does one clear Custom Views (Administrative Events) in the Event Viewer?

Similar Messages

Maybe you are looking for