How does one COPY a BluRay Disk

Woe is me! I have lost my original BluRay disk I produced in Encore some months ago. So I have borrowed a copy from a friend. How do I copy the BluRay disk?
Or can I open it in Encore?

Glad Imgburn worked with your BluRay... I use it for ALL of my disc writing with my DVD drive, but don't have a BluRay to test those functions
Read Bill Hunt on project setup http://forums.adobe.com/thread/919388?tstart=0
If you use his setup, it is easy to copy the entire project to a USB hard drive for backup... that is IF you decide to keep a project for future changes

Similar Messages

How does one copy songs from an iPod nano to a new computer?

How does one copy songs from an iPod nano to a new computer?

You can't add any iOS to a Nano since it doesn't run iOS.
For iTunes purchased music connect to your computer and in iTunes go to File > Transfer purchases.
For non-iTunes music you will need 3rd party software. Assuming you have a Windows computer try Yamipod.

How does one copy a dvd using disk utility?

How does one copu a dvd using disk utility?

By following the instructions in the os Help menu and Disk Utility "Help."

How does one copy an xygraph from a refnum?

Sorry, normally this is straight forward enough to push through on my own.
Purpose:
Pass Refnum of XY graph to subvi -->
Subvi's purpose : PRINT XYGRAPH to file/pdf/bmp, manipulate xy graph further (change back ground color to optomize for printing, optomize xy graph size for printing, move legend), perform some simple analysis on the data (rms, pkp etc)
Problem Statements:
1 When using a refnum, writing any changes to the refnums property value will also change the parent i.e. the subvi xygraph. This is not desired, so an exact copy of the xygraph must be made. HOW DO YOU DO THIS?
2 When using a refnum for an xygraph, how does one retrieve the xy values? If the property node for value is selected, a variant is produced. (which after careful examination I was still not able to make heads or tales of this particular variant)
p.s. A refnum is used because the xygraph already has formatting applied to its legend, plots, axis, etc. A refnum passed to a subvi is the only way I know to pass all formating etc for the graph.
p.p.s. I understand that there is an invoke node that will export an image, it contains certain limitations (such as requiring the subvi be opened, since it works by similar rules to a printscrn) that make it un applicable to this problem.
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay
Solved!
Go to Solution.

eximo wrote:
Problem Statements:
1 When using a refnum, writing any changes to the refnums property value will also change the parent i.e. the subvi xygraph.
I don't understand this statement. Does the subVI have a graph also? Obviously, if you make changes to properties via the refnum, then the graph it's pointing to will change.
p.p.s. I understand that there is an invoke node that will export an image, it contains certain limitations (such as requiring the subvi be opened, since it works by similar rules to a printscrn) that make it un applicable to this problem.
Again, I don't understand. Where's the graph? On the main VI, or the subVI? If it's on the main VI, why would this be an issue? Wouldn't the main VI window be open?

How does one copy tables, views, etc. from one database to another?

I do not have a strong DBA background but have been placed in charge of updating and migrating a number of tables and views across multiple databases.
For the future I need a better workflow than exporting and importing tables to/from .csv files and copy and pasting the SQL from each individual view.
Can somebody point me in the right direction? I'm happy to do some reading but have no idea where to look.

The Export utility provides a simple way for you to transfer data objects between Oracle databases, even if they reside on platforms with different hardware and software configurations.
When you run Export against an Oracle database, objects (such as tables) are extracted, followed by their related objects (such as indexes, comments, and grants), if any. The extracted data is written to an Export file.
To use Export, you must run the script catexp.sql or catalog.sql (which runs catexp.sql) after the database has been created,Ensure there is sufficient disk or tape storage to write the export file,Verify that you have the required access privileges.
Interactive Export Prompts
If you prefer to let Export prompt you for the value of each parameter, you can use the following syntax to start Export in interactive mode:
exp username/passwordExport will display commonly used parameters with a request for you to enter a value. This method exists for backward compatibility.
let me know if you have any further query!

How does one copy an audiobook to the iPad?

Received an audiobook and wanted to listen to it on long trip (air). How do I transfer it to the iPad. I recorded the book on iTunes, but don't get the full book, only a few chapters. Help.

Hi cekneary,
Thanks for visiting Apple Support Communities.
You can sync audiobooks to your iPad just like music or other content using iTunes.
First make sure the audiobook has been imported into iTunes, then sync it using the article below.
iTunes: About the Add to Library, Import, and Convert functions
http://support.apple.com/kb/HT1347
iOS: Syncing your data with iTunes
http://support.apple.com/kb/ht1386
Cheers,
Jeremy

How does one copy a PDF file into another PDF document?

I am trying to copy part of a PDF file into another PDF document. So far, the file will copy but will not paste into another PDF document. Any clues?

You can't convert Photoshop to editiable InDesign (though there is a plugin from RecoSoft that claims to make editable ID files from PDF: http://www.recosoft.com/products/pdf2id/).
About the best you can hope for is to leave pixel information in the Photoshop file (where it really belongs) and place that into an ID document, then set any type in ID.
Peter

Just brought home newly purchased MacBook Pro 15"/Maverick/Retinal Display. To my astonishment, there is NO DVD slot! No one in the store told me about this missing feature. Intolerable, How does one install software? Insert CDs to copy for iTunes?Do I ha

Just brought home newly purchased MacBook Pro 15"/Maverick/Retinal Display. To my astonishment, there is NO DVD slot! No one in the store told me about this missing feature. Intolerable, How does one install software? Insert CDs to copy for iTunes?Do I have to purchase an external DVD drive? Is one even available? What a crock!

I’ve owned Macs since 1990 (IICX my first), mostly desktops. Having had DVD/CD drives in all my previous laptop Macs since 2001 - (2) G4 Powerbooks, A 17” Mac Book Pro - and also inspecting a friend’s year-old Mac Book Pro which had the DVD slot - unless someone told me at purchase, I had no reason to know that the Retina display version of the 15” had NO DVD drive. ANYHOW, I fully intended to buy the non-Retina display version, because it was cheaper. Unfortunately by the time I got to the Apple store they were no longer selling the non-Retina display version; all versions were ONLY with the Retina display. And the fine distinction of a DVD vs. a non-DVD drive was not pointed out. So now I have to shell out an additional $80 bucks for an external SuperDrive.

With PS 7 create new Place two objects on the new file then you may cut copy and paste Cs2 create new place two object on the new file Cut is not available how does one cut and paste in new file

With PS 7
create new
Place two objects on the new file
then you may cut copy and paste
Cs2
create new
place two object on the new file
Cut is not available how does one cut and paste in new file

If your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are.

In Mail v. 3.0 how would I copy to a disk?

In Mail v. 3.0 how would I copy to a disk? This is my wife's computer - Vintage - and she wants to save to disk all the contents of one of her mailboxes.

User/Library/Mail folder. It's all in there.

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

How does one manage these new render setting for previews?

I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video. Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor?


Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
“As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
·        The "Watchout" playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
·        The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
·        If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
Thanks for your help!

How does one deal with transparency in a placed file in InDesign?

I suppose this may seem elementary, but I'm relatively new to it so here goes:
First off, my print shop says that placed images should be in EPS format. I'm creating my files in Illustrator and some of them use a gradient mask to fade an object away. When saved as an EPS, the gradient mask shows as a white box instead of fading into the background. When I copy/paste my Illustrator image into a new Photoshop file, save it as a PSD, bring that PSD into Illustrator and save it as an EPS, the whole file is in a white box.
Example. I want those aisle markers to not be in white boxes.
http://i.imgur.com/lZjtu.jpg
How does one deal with transparency in a placed image in InDesign?
Thanks.

If possible, one finds a new printer who can handle your files properly and doesn't insist on .eps.
What format are you delivering to the Printer? If it's anything other than PDF (and that's at their request) all the more reason to reread the first sentence. Why on earth are you moving things from Illustrator to Photoshop and back to Illustrator? Either one of those will save as .eps (ugh), though you need to use a clipping path for transparent areas coming out of photoshop (don't really know how Illy handles it when you say to save .eps with transparent background), but you are FAR better off with either native .AI or .PSD, both of which support transparencey, unlike .eps.If yo are delivering PDF, as you should be, it makes no difference to the printer what format the placed content uses (and it shouldn't matter to him even with native files unless he's hopelessly stuck in the 90s).
In any event, when importing from Illustrator, make sure to show the import options and check the transparent background box.

How does one drag a pic to desktop on ipad?

how does one drag a pic to desktop on ipad?

annaofalexandria wrote:
oh. is there a copy function?
Tap and hold the picture until Copy shows up.
If you are trying to set the desktop background, see Skydiver119's post.
If you are trying to do something else, post back.

How does one perform mailbox to mailbox moving of email messages w/ Messaging 3.X?

How does one perform mailbox to mailbox moving of email messages with Messaging 3.X?

In an ISP environment there are times that a user changes his
login name (his unique identifier in the ISP's network, also used as
his email address) from one value to another. It is very convenient
for the ISP to be able to move messages from the user's old mailbox
to the user's new mailbox when this situation occurs.

With Messaging Server 2.0, this was easily accomplished by simply
moving the mail messages on disk. However, with the added complexity
of Messaging 3.0 where there are back links, reference counts, etc.,
associated with mail messages, moving files on disk from one mailbox
to another is no longer valid.

The MoveUser utility, which is new in MS 3.X, moves messages from
one messaging server to another or from one maildrop path to another.
Can this utility be used to move messages from one mailbox to another?

The answer is yes, it can. The user should be aware that if
duplicate email message id's exist in the mailbox before the
move, the messages related to the duplicate message id's will
be duplicated in the target mailbox.

See the online documentation contained with the product or the
Messaging 3.X Administrator's Guide for exact syntax.

Hi
If I understand you correctly and if you are using Apple Mail version 2.0 or above navigate to /Users/Home folder. The Home folder is the one with the house icon, within that folder you will see a Library folder, within that folder you’ll see a Mail folder, within that folder you’ll see a folder that begins with POP followed by your name, within that folder will be a folder called INBOX.mbox, within that folder is a Messages folder. All the mail that you see within the application are there. They will be numbered and have a file suffix of .emlx. You can move these wherever you like.
If you are using Entourage X, or Entourage 2004 you can easily multiple select mail messages, addresses etc from within the application and drag whatever you’ve selected to wherever you like.
Tony

How does one COPY a BluRay Disk

Similar Messages

Maybe you are looking for