How does one export a style sheet?

Adobe Frame 12 help says:
"You can also use style sheets (.css) to manage the styles in the published output. In this case, you can export the current styles to a .css file. You can then open this file in a text or .css editor (such as Adobe Dreamweaver), make changes to the styles in this file and import the file back.
To export and import the style sheet:
To export the output styles defined for the current output, click Export . "
OK, so where is this?
Nothing I can find on the menus provide this option displaying regular Frame or XML view.
Also, when I find it, do I need to load the css into Dreamweaver? Shouldn't I be able to use the XML view?

No Colum, I've since found it. (Actually I found a video by Bernard A. that explained a bit).
In the "Publish" pod are 5 choices (epub, html, etc) and selecting one highlights a button for settings. Edit settings has TWO tabs, one called Style Mappings which is where the button for Import/Export styles can be found.
There's a button there for Automap Paragraph Styles which I'm going to experiment with next.
Thanks for your efforts to solve my huge learning curve.

Similar Messages

  • I am attempting, with no success, to export my bookmarks from my desk computer to my laptop. Both computers are on a network. How does one export the bookmarks to another computer?

    How does one export bookmarks? I wish to transfer a copy of my bookmarks from my desktop to my portable. Both computers are on a network. Running Firefox 3.5.3 on both machines. Operating system is Windows XP Pro service pack 3.

    Bookmarks > Organize Bookmarks -> Import & Backup - Export HTML... -
    ''then''
    Bookmarks > Organize Bookmarks -> Import & Backup - Import HTML... - from file

  • HT4168 How does one export a Pages doc to epub?

    How do I export a Pages doc to epub-previous articles state you should choose Share > Export to epub-However when you try that you get a message stating that iworks has been discontinued? What now-I still do not know how to publish a Pages document to epub (post iworks so-to-speak) -please help? I have writtern a 30 pages mini-ebook and now want to publish it to epub (to enable me to publish it on iBooks, B&N and Amazon Kindle) but I do not know how to proceed?

    How did you buy Pages?
    Which MacOs system do you have on your computer?
    What is the exact message you get?
    Which version of Pages do you have?
    Please answer all questions and if you don't know how ask again.

  • How does one export Revel photo library to Dropbox, Google Drive, OneDrive, SkyDrive et al?

    All my photos are in Revel. 

    The duplication is unnecessary. Exporting creates a duplicate of the file. So now you'll have a duplicate of a duplicate. Exporting is not "working on" a file.
    No it's not merging, it's exporting from one to the Finder and into another. No matter what lose something. If you export the Original you leave behind all the work you've done in iPhoto. If you export anything else, you lose the non-destructive editing and the ability to revert to the original. With merging you preserve that work. Yes, you can trash the old Library when you have completed the manoevre but no it's not the same thing as merging.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue. But in brief:
    Current gets you the iPhoto Preview, used for sharing via media browsers. It's a jpg, medium quality missing metadata. Original gets the file you imported, unchanged and then you can export different version of the current version at different qualities. If you choose to export anything except the Original you do not get a Raw. There's no such thing as an "edited Raw", and you lose the connection between the original and the exported version. That means you've taken a non-destructive workflow and turned it into a destructive one.
    The Tiff will certainly be higher qulaity and less likely to suffer generational loss in future editing but the file sizes are vast, often more than 10 times the size of the jpeg.
    Put it this way, it would be cheaper to buy Library Manager than the disk you'll need to contain all the Tiffs. Unless you plan on a lot of editing, I'd go for a high quality jpeg as a reasonable compromise.
    To be clear:
    So, I guess my new question is, how can I edit the Raw image and keep it in a RAW format that IPhoto recognizes so that I can reprocess without any loss at a future time, or is it that once you edit a RAW image, then it is no longer a RAW image?
    Once you edit a Raw it can no longer be a Raw. End of.

  • How does one export a completed project to archive media?

    I just finished editing my first video with FCP-X.
    I want to be able to archive the project, in its entirety, to another drive, complete with media.  That is that all media files are included so if the client wants me to go back and make changes, updates, etc., I can just move the archived project back to my Movies folder and everthing will be right there so I can get back to work.
    Then I want to then be able to delete the finished project from my Movies folder and begin a whole new project.
    I would really appreciate some help, or if I can get pointed to in the right direction to find the instructions.
    Also, is it true that FCP-X can only work on one project at a time?

    Hi Tom,
    I have the same wish copying a project with used clips only to another drive for storage that works as independent project.
    So I executed the command “duplicate project + used clips only”  (i checked "include render files") creating a duplicate onto a second drive. When I wanted to check if the duplicated project would work independently all files were missing (I unplugged the first disk where the original project+events are stored).
    It appears that FCPX creates alias files of your media referencing to the original event on the first disk. So it still needs the original event files to work properly!!??
    My question: is there any way to really duplicate a project + really used clips (no alias) only that works INDEPENDENTLY of any other files in other locations?
    (the reason I want this is that I don’t need to store the entire original event with transcoded media being 3 times bigger than the original media that comes from my DSLR)
    Thanx a stack in advance
    Cheers
    Caspar

  • How does one define a default style for a custom Flex component?

    How does one define a default style for a custom Flex component?
    hello
    I created a new set of Flex component library slib.swc (Flex 4.5). Would also like to have a default style. defaults.css file, making it the default style of the component library.
    Like flex the builder install directory of sdks \ 4.5.0 \ frameworks out \ libs directory has a spark.swc file, open with Winrar will see defaults.css this file. Defaults.css file defines the default style of the flex spark components.
    How can it be achieved?
    As follows
    slib.swc contains a CLabelEx components, and a defaults.css file
    defaults.css source file as follows:
    @ namespace s "library :/ / ns.adobe.com / flex / spark";
    @ namespace mx "library :/ / ns.adobe.com / flex / mx";
    @ namespace cn "http://os.slib.cn";
    cn | CLabelEx
            styBackgroundAlpha: 1;
            styBackgroundColor: # 569CC0;
            styBorderAlpha: 1;
            styBorderColor: # 569CC0;
            styBorderWeight: 1;
            styCornerRadius: 3;
    In slib.swc the application MyLabel.mxml of the source file as follows:
    <? xml version = "1.0" encoding = "utf-8"?>
    <s: Application, the xmlns: fx = "http://ns.adobe.com/mxml/2009
                               xmlns: s = "library :/ / ns.adobe.com / flex / spark"
                               xmlns: mx = "library :/ / ns.adobe.com / flex / mx"
                               xmlns: cn = "http://os.slib.cn
                               the minWidth = "955" The minHeight = "600">
            <fxeclarations>
            </ fxeclarations>
            <cn:CLabelEx x="67" y="112"/>
    </ s: Application>
    I hope CLabelEx default use cn | CLabelEx, style to display its appearance.
    I refer to above approach, but failed to achieve. Can you please re-Detailed
    Thanks!

    dj is right. Any Folder can be a picture folder.
    Create a root level folder and add it to your Pictures Library in Windows.  It will show up with all the scattered pictures from other programs. It can even be a different dirve if you like.  You  can even specify one to be the default save location for pictures in this dialog.
    Navigate to Pictures in your Libraries in Windows Explorer Right Click and select Properties.
    Message was edited by: Rikk Flohr forgot the instructions...

  • How does one manage these new render setting for previews?

    I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video.  Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
    I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor? 
      

    Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
    These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
    “As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
    ·        The "Watchout"  playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
    ·        The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
    ·        If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
    Thanks for your help!

  • How does one resize a photo to the dimensions required by a contest?

    How does one resize a photo in aperture to the dimensions required by contest?

    Are you submitting a print or a file?
    You set the size of your print in the print dialog.
    You set the number of pixels (the unit of linear measurement of digital images is the pixel) for a file when you create that file by exporting an Image from your Library. You can specify a recommended number of Pixels per Inch by using the (mis-named) DPI field in the Image Export Preset you use when you export.
    The files you import have a height and width in pixels.  Height/width = the Aspect Ratio.  You can crop to any aspect ratio using Aperture's Crop tool.
    What are the specs required by the contest's sponsors?
    Message was edited by: Kirby Krieger -- added aspect ratio and cropping.

  • How does one increase the y-axis (amplitude) of the audio tracks?

    How does one increase the y-axis (amplitude) of the audio tracks? My patient appears to have flatlined. I don't want to increase the gain, just the way the waveform looks on my monitor.

    DrDtMM
    The "Expert view" is a part of the new interface of Premiere Elements 11. In your version 10, you have the Timeline and the Sceneline view choices.
    For now, I will assume that you are in the Timeline view where you utilize video and audio tracks and not a Filmstrip with scene slots.
    I suspect that you may be after the following. Let us see.
    To the right of where it shows the name "Audio 1" is a microphone icon. That represents the "Audio Display Style". There are two Audio Display Styles and you can select one or the other by toggling that microphone icon.
    a. In one instance, you will see the wave form plus a horizontal orange line which is typically the Volume Rubberband for Volume adjust. This Display Style has a light green background.
    and
    b. In the other case, you will see a dark horizontal line, no wave form. That dark line is on a light green background.
    I suspect you are at "b". Are you aware that "a" exists.
    If you want a really blown up version of "a" to look at, you could separate the audio from the video, double click the audio to open the Preview Windows, and then scale up the Preview Window.
    We will be watching for your follow up to see if we are getting in sync.
    Thanks.
    ATR

  • How to attach a CSS style sheet ?

    Hi,
    How to attach a CSS Style sheet to a portal page ?
    Thanks for your help,
    Jean-Christophe

    For a standard Portal page you should use the Portal styles and associate them to a page. These effectively generate a CSS style sheet anyway if you view the HTML source of a rendered page in your browser.
    Using the correct PDK APIs you effectively reference the CSS tags in your Java or PL/SQL code.
    If your portlet need to open a page in a new window you can no longer reference the Portal page style as the CSS style sheet does not get attached.
    In this situation, code your HTML as normal and reference your CSS style sheets as normal.
    If you create you CSS sheet you can store it in a page as a file and access using the direct access URL like I showed you in a previous response regarding the storing of images.
    Cheers,
    John

  • How does one add tables to an existing universe using COM designer SDK.

    Morning All
    How does one add tables to an existing universe using COM designer SDK. I have tried:
    objUniverse.Tables.Add (strTable_Name)
    but get "Cannot create Table" error.
    Any ideas?
    Thanks in advance.
    Anita

    Hi Anita,
    -Use the Add method to add classes and objects to an existing universe using a VB 6 application.
    Adding a Class
    Definition: Function Add(Name As String) As Class
    Syntax: NameOfClassesVariable.Add
    Adding an Object Instance
    Definition:  Function Add(Name As String, [ClassName As String]) As Object
    Syntax: NameOfObjectsVariable.Add(name, [class])
    - name is the name of the object.
    - class is the name of the class containing the object. This parameter should be used in cases where more than one objects exist with the same name.
    Sample Visual Basic 6 Code
    Dim DesApp As Designer.Application
    'MODIFY AND EXPORT CLASSES AND OBJECTS OF AN EXISTING UNIVERSE
    Sub modify_and_export_universe()
    Dim DesUnv As Designer.Universe
    Dim DesCls As Designer.Class
    Dim DesObj As Designer.Object
    Dim DesDBCol As Designer.DBColumn
    Dim DBColName As String
    Set DesApp = New Designer.Application
    'Login to designer
    Call DesApp.LogonDialog
    'Make sure to log on with your administrator profile
    'e.g : "hostname","username", "password","Enterprise"
    'Make Designer application visible
    DesApp.Visible = True
    'This line disable warning messages from Designer
    DesApp.Interactive = False
    'to Open  locally  the universe you want to modify
    'Set DesUnv = DesApp.Universes.Open("club_uni")
    'Use OpenFromEnterprise method (Universes Class) to import a universe from the repository and opens it
    Set DesUnv = DesApp.Universes.OpenFromEnterprise("Universes", "club_uni", False)
    'Add a valid connection which already exists
    DesUnv.Connection = "club"
    'open the universe
    'Call DesApp.Universes.Open("club_universe")
    'Add the table Account and refresh the view in the main window
    Set DesTab = DesUnv.DBTables.Item("Customer").Insert
    DesUnv.ArrangeTables
    'Add a class
    Set DesCls = DesUnv.Classes.Add("Class MyCustomer")
    'Looping through all the fields of the DB Table Account
    For Each DesDBCol In DesUnv.DBTables.Item("Customer").DBColumns
    'Store name of the column
        DBColName = DesDBCol.Name 
         'Add an object to the class
        Set DesObj = DesCls.Objects.Add("Obj " & DBColName)
         'Affect a field to the object
        DesObj.Select = "Customer" & "." & DBColName
    Next
    'Save the existing universe with the same name club_uni or you can change
    DesUnv.SaveAs "club_uni"
    MsgBox "Universe created and saved Class MyCustomer has been added!!"
    'Close the universe
    UnvFullName = DesUnv.FullName
    MsgBox "The UniverseFilePath is " & UnvFullName
    'Close the universe
    DesUnv.Close
    'This line disable warning messages from Designer
    DesApp.Interactive = False
    'Export the universe to the CMS DB (to the last universe folder)
    'Make sure you save the universe before exporting it
    Call DesApp.Universes.Export("Universes", UnvFullName)
    MsgBox "This document has been exported successfully !!"
    'Close designer
    DesApp.Quit
    Set DesApp = Nothing
    End Sub
    Hope this helps.
    Regards,
    Deepti Bajpai

  • How does one tell if the J2EE services are running with Unlimited

    How does one tell if the J2EE services are running with Unlimited
    security? We have applied the export Policy to the server but we do notsee any reference to it running with it. .we apply the Service packs SAP now upgrades that JAVA as well . Do that process treat the JAVA
    lib/security area correctly.

    Just out of curiosity... Is there something you do
    like about Mac/Apple?
    To answer your question: no, not really. However, the points that I made here were about Safari and accompanying utilities, not about Apple in general.
    If it makes you feel any better, I am just as, or even more, critical of Micro$oft as the occasions arise...Windoze Vista is the most recent occasion and has given sufficient reasons and opportunities to vent my spleen that I actually have eased up on Apple, politicians, nut-case religious extremists, cell phone owners, and the Department of Homeland Paranioa, etc., due to an exhaustion of creative energy.

  • How does one email a video from iPhoto

    how does one email a video from iPhoto

    One doesn't.
    Simply, sharing video via email is not advisable.
    Many email services have an attachment limit of 20mb and some a limit of 10mb. As emails are sent through an array of relays, the effective limit is the smallest file size allowed on any of the relays.  That means that video is rarely suitable for emailing.
    Then there's the whole issue of Codecs and not all machines will have the codecs to play all videos. Plus, folks with slower connections can find it very inconvenient to download large video files.
    Finally, sharing video from iPhoto via email is not supported. All that gets you is the Movie thumbnail. If you feel you must share via email then you'll need to export the video first, and attach that. Use the File -> Export command and set the kind  to Original.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.
    Other than that your options include:
    Upload it to a sharing site like YouTube or Vimeo and email a link - these will allow the recipient to view the material online. That will avoid the codec issues mentioned, and the person can still download the video file if they wish.
    Upload it to sharing services like Dropbox or YouSendIt and email a link. This will require that they download the material to their machines to view.
    Regards
    TD

  • How does one reduce the size of a photo on iphoto?  I want to post images on my website, but they exceed the limit.

    How does one reduce the size of a photo on iphoto.  I want to post images to my website but they exceed the limits. 

    Select the photo(s) and export (file menu ==> export) them. You can change the size there setting a maximum pixel dimension and/or reducing quality
    LN

  • How does one give out enough spaces for a column in SQL report ?

    How does one reserve enough spaces for a column in SQL report ?
    Ex: 2 columns defined as the following
    projectNo varchar2(10)
    ProjectName varchar2(50)
    When create an sql report, the report heading will show below. If my project name is " Tire Strength Test At Site R987654" . I need to get it to show in one line since it was defined as varchar2(50)
    projectNo     ProjectName
    A0001         Tire Strength
                  Test At Site
                  R987654 There got to be a way to get around here . Thanx in advance.
    tai

    I noticed the CSS Style settings only seem to work if using a "Standard Report Column". Unfortunately I have the need to define some report columns where undesired wrapping occurs as "Display as Text (based on LOV, does not save state)" and tried to avoid wrapping, but no luck - is there a way around this (other than performing the report query using a huge DECODE clause, which somewhat renders the LOV useless except for data entry)?
    Thanks in advance for any ideas,
    Holger

Maybe you are looking for

  • Updater Adobe Bridge CS5 4.0.2 fails to install

    Any ideas here...I keep getting a signal from Adobe Updater that my Adobe Bridge CS5 needs an update. Downloads CS5 4.0.2 ok...then the installation fails...no logging appears to occur of the problem. Has anyone dealt with this before, I cant seem to

  • CFselect onchange doesn't work on flash Form

    Hello : I have looked for more than a week to find out answer  but couldn't fine anything. I have cform with tye="Flash" and cfselect with query to populate the values. I want use onchange="" after I select any value on cfselect to submit the pages a

  • Encoder crashes and will not open anymore

    I have worked on encoder, trying out some new codecs (cineform) - I had a crash and since then, encoder will not open anymore. Is there a way to trash the prefs? I can only find the plist, is there anything else? Thanks!

  • How do I combine a number of document libraries into one heading?

    Please can anyone help me. I have a number of SharePoint Document Libraries which I want to move to one area (each document library is a project and when the project closes I want to be able to show this under one view 'Closed Projects').  HOw can I

  • Item Renderers for Trees

    Does anyone know what the function in the example below do? I've been doing flash 7 and 8 for 2 yrs and am trying to convert everything over to flex 2.0. I added the class below to an itemRenderer for a tree but can't figure out what the function do.