How does one forward any article found in firefox to a friend

when I find a web site that I like on firefox and want to forward the information to a friend, how do I do this?
like on aol mail, you can forward any mail to a friend, how do you do that on firefox?

WuTangClanFinancial wrote:
I don't know crap of html.
That's part of the problem. Without a knowledge of HTML and CSS (Cascading Style Sheets), Dreamweaver will remain a total mystery to you. You access the tools to change fonts, colours, etc, by clicking the CSS button on the left of the Property inspector at the bottom of the Document window. But as soon as you start selecting options, you will be confronted with the New CSS Rule dialog box. So, without knowledge of the basic technologies involved in website design, you're stuck.
You'll find a bunch of tutorials and articles in the Dreamweaver Developer Centre. Select the Getting Started tab.

Similar Messages

  • How does one get any basic options in Dreamweaver?

    I am trying out Dreamweaver due to that my school is offering it.  I don't know crap of html. But I have to make an attempt at making an internal school website. Okay so... it says it's DW CS4, I don't know what CS4 means.  How do I get the options to change the font size, font color, and anything else as a toolbar on the screen?  I dont want to keep searching through 20 tabs to find what I need.
    Thank You!

    WuTangClanFinancial wrote:
    I don't know crap of html.
    That's part of the problem. Without a knowledge of HTML and CSS (Cascading Style Sheets), Dreamweaver will remain a total mystery to you. You access the tools to change fonts, colours, etc, by clicking the CSS button on the left of the Property inspector at the bottom of the Document window. But as soon as you start selecting options, you will be confronted with the New CSS Rule dialog box. So, without knowledge of the basic technologies involved in website design, you're stuck.
    You'll find a bunch of tutorials and articles in the Dreamweaver Developer Centre. Select the Getting Started tab.

  • How does one delete VPN configurations in the settings list not used any more?

    How does one delete VPN configurations in the settings list not used any more?

    Sorted found profiles and delete from there

  • How does one get points for articles

    how does one get points for articles

    You submit your article, it is reviewed by an SDN content manager and then published,  about a week after you should see some points for your efforts.  If not, contact [email protected]
    Regards,
    Rich Heilman

  • How does one ensure an automatic save function every 5 mins for any document you are working on. Yesterday I erased a doc I was on and had to rework from the start.

    How does one ensure an automatic save function every 5 mins for any document you are working on. Yesterday I erased a doc I was on and had to rework from the start.

    Well I understand that auto save is already present and saving your doc every 5 mins. But then why do you think, this did not happen yesterday in the following case?? I wrote one page of a long document and wanted to format it before proceeding. I selected the part to be formatted and instead erased it. I could not find that page again. I had to rewrite the matter.

  • How does one turn the french keys on and off in the wireless keyboard?

    how does one turn on and off the French keys on a wirleless keyboard?

    Hello dustysmart,
    I believe what is going on is that you have a secondary keyboard turned on within Windows. When you press alt + shift at the same time you are alternating between the two keyboards.
    To check this (and possibly delete the French keyboard if you don't want it) you can go into Control Panel and check under Change Keyboard.
    This article will provide you instructions depending on which version of Windows you are using.
    How to Type French Accents
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • How does one remove yahoo from firefox?

    please, how does one remove yahoo & any of its features from firefox?
    it conflicts with my ghostery software. if i can not get rid of yahoo, i will have to remove and reinstall firefox. i want to avoid this because it will cause me to lose my bookmarks.
    thank you in advance.

    Hi gunnermac,
    You should take a look at the Knowledge Base article [[How to set the home page]]. Your homepage might have been changed by a particular site. Sites like MSN, Yahoo, etc have been know to ask to become your homepage.
    There are steps in that article to reset your homepage preferences to default. I would try that first to clear out any strangeness. If that works, you can try setting your homepage again to your personal preference.
    If Yahoo has been set as the default search in the search bar, you should take a look at the Knowledge Base article [[Search bar]].
    If the address bar search has been changed as well, you might want to take a look at [[Location bar search]].
    If that doesn't work you should look at the article [[Preferences are not saved]].
    Finally, your issue may be because you've been hit with some [https://support.mozilla.org/en-US/kb/Is%20my%20Firefox%20problem%20a%20result%20of%20malware?s=malware&r=0&e=sph&as=s#w_how-do-i-get-rid-of-malware Malware].
    Hopefully this helps!

  • How does one copy an xygraph from a refnum?

    Sorry, normally this is straight forward enough to push through on my own.
    Purpose:
    Pass Refnum of XY graph to subvi -->
    Subvi's purpose : PRINT XYGRAPH to file/pdf/bmp, manipulate xy graph further (change back ground color to optomize for printing, optomize xy graph size for printing, move legend), perform some simple analysis on the data (rms, pkp etc)
    Problem Statements: 
    1 When using a refnum, writing any changes to the refnums property value will also change the parent i.e. the subvi xygraph.  This is not desired, so an exact copy of the xygraph must be made.  HOW DO YOU DO THIS?
    2 When using a refnum for an xygraph, how does one retrieve the xy values?  If the property node for value is selected, a variant is produced.  (which after careful examination I was still not able to make heads or tales of this particular variant) 
    p.s. A refnum is used because the xygraph already has formatting applied to its legend, plots, axis, etc.  A refnum passed to a subvi is the only way I know to pass all formating etc for the graph.
    p.p.s. I understand that there is an invoke node that will export an image, it contains certain limitations (such as requiring the subvi be opened, since it works by similar rules to a printscrn) that make it un applicable to this problem.
    -Regards
    eximo
    UofL Bioengineering M.S.
    Neuronetrix
    "I had rather be right than be president" -Henry Clay
    Solved!
    Go to Solution.

    eximo wrote:
    Problem Statements: 
    1 When using a refnum, writing any changes to the refnums property value will also change the parent i.e. the subvi xygraph.
    I don't understand this statement. Does the subVI have a graph also? Obviously, if you make changes to properties via the refnum, then the graph it's pointing to will change.
    p.p.s. I understand that there is an invoke node that will export an image, it contains certain limitations (such as requiring the subvi be opened, since it works by similar rules to a printscrn) that make it un applicable to this problem.
    Again, I don't understand. Where's the graph? On the main VI, or the subVI? If it's on the main VI, why would this be an issue? Wouldn't the main VI window be open?

  • How does one silence mountain lion startup sound?

    How does one silence mountain lion startup sound?              

    After asking this question many times and always getting the ususal fixes (that don't work in Mountain Lion) Psst, Startninja, turn down the sound when you shut down, yada yada yada. And the "why don't you just put it to sleep" comments :/  duh..  Sometime we want to shut it down!! Even Apple support has no idea how to do it. Here's is the fix and it is so simple it hurts.
    Controlling the volume of the startup chime is easy to set in the System Preferences Sound panel, but you need to make two different settings if you have external speakers connected to your Mac. There is no need to use scripts or any other coding to make this adjustment.
    There are both internal and external speaker output settings in the sound preference pane. In order to adjust (or turn off) the volume of your Mac's internal speakers, nothing must be plugged into the headphone jack. Keep in mind that this setting completely controls the volume of your internal Mac speakers, so if you mute the sound, and have no external speakers, you will get no sound at all from your Mac.
    To adjust the volume on your Mac's internal speakers:
    Unplug speakers or headphones from the headphone jack.
    Go to System Prefs > Sound, then click on the Output tab.
    You will then see Internal Speakers (Type built-in) highlighted in the window.
    Adjust the output volume (which also controls the chime volume) in the slider at the bottom of the window. Remember if you mute it there will be no internal speaker sound.
    To set the volume for your external speakers:
    Plug in speakers or headphones to the headphone jack.
    Go to System Prefs > Sound >, then click on the Output tab.
    You will then see Headphones (Type built-in) highlighted in the window.
    Adjust the output volume (which controls the chime volume in the external speakers) with the slider at the bottom of the window. Remember if you mute it there will be no external speaker sound.
    http://hints.macworld.com/article.php?story=20120513121111656
      Lovin my Mac but thanks for nothing Apple support and community on this very easy to adjust issue.

  • How does one change the font size for folders and/or file lists in the Bookmarks Library?

    How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
    Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
    As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
    With regard to font size,
    1. there is no “Edit Bookmarks” or like option to edit the list in this version
    2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
    3. expanding the browser window has no effect on font size
    4. “Preferences” settings for font size has no effect in that window either, including advanced settings
    5. “Help” offers none that I can find.
    Can any of you Help?!?

    Maybe this extension helps:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  • Using family sharing, how does one view and download songs from a family member's collection in itunes?

    Using family sharing, how does one view and download songs from a family member's collection in itunes?

    When you click on your device you are presented with the pages
    Summary
    Info
    Apps
    Tones
    Music
    Movies
    TV shows
    Books
    Photos
    To remove Audiobooks depending on the type of Audiobook ie a series of mp3 files you will find under music and probably have to deselect the album name to remove it. I don't have any of these as I download from Audible or I use Audiobook Builder to stictch together mp3 files into m4b files. To find these Click on Books you will immediately see a section for books (in reality ebooks). Scroll down past that and you will see Audiobooks where you can select and deselect. Deselect the required Audiobooks and Click Sync

  • How does one pass import parameters to a report within a method?

    Hello all,
    Well how does one  pass import parameters to a report which is within a method ...end method.
    for example :
    method 123
    SUBMIT reportname using selection '1000'
    endmethod .
    Here we need to pass values into the selection screen and run the report for those values.
    The values are say 'ABC'   (  tablename "DEF" and field name "HIJ" ).
    I hope the question is clear, awaiting your response 
    Thanks and Regards,
    Sandeep.

    Go to SE24
    Parameters: Give the Parameter name, Typing method is "Type" is the domain type that u are selecting, say for e.g :  Parameter is "P_CONT" , its associated type "CHAR32" etc
    For Select Options:  Parameter name say "S_CUST", Type"importing". For this you need to give an associated type which must be created as "TABLE TYPE " in SE11. That table type needs to have a "LINE TYPE" .
    LINE TYPE is a Structure created with components "SIGN, OPTION, LOW & HIGH" for select-Options.
    NOTE: for a Table type related to Customer data fields "say KUNNR", the line type created must have the Component Type and data Type corresponding to the Data Element associated with "KUNNR" ;i.e: "CHAR" etc.
    See if this is clear to you or revert back in case of any Confusion.

  • How does one drag a song to a new album?

    How does one drag a song from one album and drop it into another album?
    Many of the mp3 files that I use are ones that I create myself for my students. It would be great if I could drag them into the correct album without having to type in the information (very tedious).
    I am new to Mac from Windows and I can't discern how to accomplish re-assigning albums in the manner that I was able to previously using Windows Media Player.
    Any suggestions or perhaps different workflow suggestions?

    I'm a high school music teacher and a lot of the tracks are student-created (or instructor-created). It has always been easier for me to leave the mp3 tag "unknown" and then drag them to the appropriate album in Windows Media Player.
    I actually took something from your reply that I think will work well. By adding newly created files to a playlist, I could select them and then edit the tag data every few days by selecting all of the items in the playlist (I think that will work!).

  • How does one define a default style for a custom Flex component?

    How does one define a default style for a custom Flex component?
    hello
    I created a new set of Flex component library slib.swc (Flex 4.5). Would also like to have a default style. defaults.css file, making it the default style of the component library.
    Like flex the builder install directory of sdks \ 4.5.0 \ frameworks out \ libs directory has a spark.swc file, open with Winrar will see defaults.css this file. Defaults.css file defines the default style of the flex spark components.
    How can it be achieved?
    As follows
    slib.swc contains a CLabelEx components, and a defaults.css file
    defaults.css source file as follows:
    @ namespace s "library :/ / ns.adobe.com / flex / spark";
    @ namespace mx "library :/ / ns.adobe.com / flex / mx";
    @ namespace cn "http://os.slib.cn";
    cn | CLabelEx
            styBackgroundAlpha: 1;
            styBackgroundColor: # 569CC0;
            styBorderAlpha: 1;
            styBorderColor: # 569CC0;
            styBorderWeight: 1;
            styCornerRadius: 3;
    In slib.swc the application MyLabel.mxml of the source file as follows:
    <? xml version = "1.0" encoding = "utf-8"?>
    <s: Application, the xmlns: fx = "http://ns.adobe.com/mxml/2009
                               xmlns: s = "library :/ / ns.adobe.com / flex / spark"
                               xmlns: mx = "library :/ / ns.adobe.com / flex / mx"
                               xmlns: cn = "http://os.slib.cn
                               the minWidth = "955" The minHeight = "600">
            <fxeclarations>
            </ fxeclarations>
            <cn:CLabelEx x="67" y="112"/>
    </ s: Application>
    I hope CLabelEx default use cn | CLabelEx, style to display its appearance.
    I refer to above approach, but failed to achieve. Can you please re-Detailed
    Thanks!

    dj is right. Any Folder can be a picture folder.
    Create a root level folder and add it to your Pictures Library in Windows.  It will show up with all the scattered pictures from other programs. It can even be a different dirve if you like.  You  can even specify one to be the default save location for pictures in this dialog.
    Navigate to Pictures in your Libraries in Windows Explorer Right Click and select Properties.
    Message was edited by: Rikk Flohr forgot the instructions...

  • I'm having problems with iPhoto and the facebook set-up.  Every time I attempt to do so it says an error has occured and try again later.  I have not seen a solution posted.  Therefore, how does one contact Apple to solve the problem?  I'm new to the worl

    I'm having problems with iPhoto and the facebook set-up.  Every time I attempt to do so it says an error has occured and try again later.  I have not seen a solution posted.  Therefore, how does one contact Apple to solve the problem?  I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

Maybe you are looking for