How does one install non-English character sets for use with the "find" function in Acrabat Pro 11?

I have pdf files in European languages and want to be able to enter non-English characters in the "find" function. How does one install other character sets for use with Acrobat Pro XI?

Have you tried applying the update by going to Help>Updates within Photoshop Lightroom?  The update should be using the same licensing?  Did you perhaps customize the installation location?  Finally which operating system are you using?

Similar Messages

  • How does one manage these new render setting for previews?

    I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video.  Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
    I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor? 
      

    Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
    These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
    “As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
    ·        The "Watchout"  playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
    ·        The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
    ·        If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
    Thanks for your help!

  • How does one install a express sql server to run with Visual Web Developer 2008?

    I successfully installed .NET framework v 3.5 and VWD 2008 on a new Vista laptop. When I want to add a Sql Server database to a website, errors tell me to install SS 2005 Express. MSDN SS 2005 Express download tells me I MUST  first install .NET framework v 2.0 before SS 2005. When I try to install framework v 2.0, I'm sent to v. 3.5 and no way to download SS 2005.
    How does one install a express sql server to run with Visual Web Developer 2008?   

    Momark,
    Do you still need help with this?
    Thank you!
    Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • How does one install Firefox on Windows 7 for just one user, so separate users can have completely independent Firefox installations?

    I'd like to create a new user, and install firefox for that user completely separate in all respects from the existing user's installation, so that there is no interaction at all between the two installations, with separate copies of the program files as well as separate Firefox profiles.

    I was asking about how to have multiple Windows user accounts, and how to install Firefox independently for different Windows user accounts.
    Firefox does not ask if you want to install it for everyone or just the current user, unlike many programs.
    I tried switching to the newly created Windows user account, which was able to use the Firefox installed by the other user account, and installing Firefox, and although there's no indication that it's installing a user specific copy of Firefox, it is. Now the original user account sees it's installation of Firefox and the second user account sees it's installation of Firefox and no longer runs the first users installation of Firefox.
    Creating separate Firefox profiles is what I was trying to say I didn't want to do. That's why I mentioned wanting completely separate copies of the program files, not one copy of the program files running two instances simultaneously.

  • Just brought home newly purchased MacBook Pro 15"/Maverick/Retinal Display. To my astonishment, there is NO DVD slot! No one in the store told me about this missing feature. Intolerable, How does one install software? Insert CDs to copy for iTunes?Do I ha

    Just brought home newly purchased MacBook Pro 15"/Maverick/Retinal Display. To my astonishment, there is NO DVD slot! No one in the store told me about this missing feature. Intolerable, How does one install software? Insert CDs to copy for iTunes?Do I have to purchase an external DVD drive? Is one even available? What a crock!

    I’ve owned Macs since 1990 (IICX my first), mostly desktops. Having had DVD/CD drives in all my previous laptop Macs since 2001 -  (2) G4 Powerbooks,  A 17” Mac Book Pro - and also inspecting a friend’s year-old Mac Book Pro which had the DVD slot - unless someone told me at purchase, I had no reason to know that the Retina display version of the 15” had NO DVD drive. ANYHOW, I fully intended to buy the non-Retina display version, because it was cheaper. Unfortunately by the time I got to the Apple store they were no longer selling the non-Retina display version; all versions were ONLY with the Retina display. And the fine distinction of a DVD vs. a non-DVD drive was not pointed out. So now I have to shell out an additional $80 bucks for an external SuperDrive.

  • How does one install page turning arrows in iBook author?

    How does one install page turning arrows in IBook Author?

    Hello Robert,
    I don't think such a feature exists within iBooks Author but it is a feature within ePub.
    So if you are viewing ePub books on an iPad the pages turn but if you are looking at books made with iBooks Author it is a page sliding.
    I will stand to be corrected here but I hope this helps some what.
    Regards,
    Nigel

  • How does one install Adobe Flash on my iMac?

    How does one install Adobe Flash on an iMac?

    Hi,
    What version of OSX are you running?  Assuming it is 10.6 or greater, please visit https://get.adobe.com/flashplayer to download and install the latest version of Flash.
    Thanks,
    Chris

  • How does one add tables to an existing universe using COM designer SDK.

    Morning All
    How does one add tables to an existing universe using COM designer SDK. I have tried:
    objUniverse.Tables.Add (strTable_Name)
    but get "Cannot create Table" error.
    Any ideas?
    Thanks in advance.
    Anita

    Hi Anita,
    -Use the Add method to add classes and objects to an existing universe using a VB 6 application.
    Adding a Class
    Definition: Function Add(Name As String) As Class
    Syntax: NameOfClassesVariable.Add
    Adding an Object Instance
    Definition:  Function Add(Name As String, [ClassName As String]) As Object
    Syntax: NameOfObjectsVariable.Add(name, [class])
    - name is the name of the object.
    - class is the name of the class containing the object. This parameter should be used in cases where more than one objects exist with the same name.
    Sample Visual Basic 6 Code
    Dim DesApp As Designer.Application
    'MODIFY AND EXPORT CLASSES AND OBJECTS OF AN EXISTING UNIVERSE
    Sub modify_and_export_universe()
    Dim DesUnv As Designer.Universe
    Dim DesCls As Designer.Class
    Dim DesObj As Designer.Object
    Dim DesDBCol As Designer.DBColumn
    Dim DBColName As String
    Set DesApp = New Designer.Application
    'Login to designer
    Call DesApp.LogonDialog
    'Make sure to log on with your administrator profile
    'e.g : "hostname","username", "password","Enterprise"
    'Make Designer application visible
    DesApp.Visible = True
    'This line disable warning messages from Designer
    DesApp.Interactive = False
    'to Open  locally  the universe you want to modify
    'Set DesUnv = DesApp.Universes.Open("club_uni")
    'Use OpenFromEnterprise method (Universes Class) to import a universe from the repository and opens it
    Set DesUnv = DesApp.Universes.OpenFromEnterprise("Universes", "club_uni", False)
    'Add a valid connection which already exists
    DesUnv.Connection = "club"
    'open the universe
    'Call DesApp.Universes.Open("club_universe")
    'Add the table Account and refresh the view in the main window
    Set DesTab = DesUnv.DBTables.Item("Customer").Insert
    DesUnv.ArrangeTables
    'Add a class
    Set DesCls = DesUnv.Classes.Add("Class MyCustomer")
    'Looping through all the fields of the DB Table Account
    For Each DesDBCol In DesUnv.DBTables.Item("Customer").DBColumns
    'Store name of the column
        DBColName = DesDBCol.Name 
         'Add an object to the class
        Set DesObj = DesCls.Objects.Add("Obj " & DBColName)
         'Affect a field to the object
        DesObj.Select = "Customer" & "." & DBColName
    Next
    'Save the existing universe with the same name club_uni or you can change
    DesUnv.SaveAs "club_uni"
    MsgBox "Universe created and saved Class MyCustomer has been added!!"
    'Close the universe
    UnvFullName = DesUnv.FullName
    MsgBox "The UniverseFilePath is " & UnvFullName
    'Close the universe
    DesUnv.Close
    'This line disable warning messages from Designer
    DesApp.Interactive = False
    'Export the universe to the CMS DB (to the last universe folder)
    'Make sure you save the universe before exporting it
    Call DesApp.Universes.Export("Universes", UnvFullName)
    MsgBox "This document has been exported successfully !!"
    'Close designer
    DesApp.Quit
    Set DesApp = Nothing
    End Sub
    Hope this helps.
    Regards,
    Deepti Bajpai

  • Does anyone maybe know why the new Macbook pros don't have iWeb and how i can install it. My Macbook already came with the iLife thing, but it seems to only have iMovie, iPhoto and Garage Band. is there any way that i can install iWeb?

    Does anyone maybe know why the new Macbook pros don't have iWeb and how i can install it. My Macbook already came with the iLife thing, but it seems to only have iMovie, iPhoto and Garage Band. is there any way that i can install iWeb?

    Apple discontinued iWeb. That's the case for over a year now.
    Topics in this forum will tell you that in order to install iWeb you have to find a copy at eBay, Amazon and similar places.
    Or here

  • In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?

    In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?
    =IF(I127,NOW()," ")
    I127 equals a check box. The formula retuns a value of the current date and time when a check is placed in the box. How does one lock that date and time so that it cannot be changed?

    I don't think it is possible to lock in the date and time using a formula. You could put NOW() in a cell, copy, and Edit Paste Formula Results where you want the result.
    Or if you are "time stamping" a lot, you may find this Automator Service (Dropbox download) helpful. It puts a "Today" function (actually it should be named "Now" because it includes both date and time) in your Services menu like this:
    Just doubleclick the .workflow package to install it. You may have to click "download anyway" in System Preferences > Privacy & Security.
    If you want you can assign the service a keyboard shortcut in System Preferences here:
    SG

  • Does FrameMaker 12 have an LEID value for use with serialization via AAMEE?

    Does FrameMaker 12 have an LEID value for use with serialization via AAMEE?

    I wish life was that easy :-).
    You have a valid argument; So I had this kind of test going. I had 50,000 messages of
    type-1 first loaded into the queue. Then I had 100 messages of type-2 loaded on to the
    queue.
    At this point, I issued a conditional dequeue that skipped type-1 messages and only
    asked for type-2 messages. I saw the full table scan.
    Then I created another test case 1 million type-1 messages had to be skipped.
    Still full table scans. I am not convinced that the doing full table scans is the best query
    plan out there. Cost Based Optimizer tends to disagree for some reason. May be
    it is right; But I have to avoid FTS when possible. As you know, not only blocks
    used by the existing rows in the table get scanned, but also every block until the
    high water mark level.
    One might say for a table with volatile data that comes and goes on a daily basis, million is an extreme case. Howvere, I am building a general purpose infrastructure based
    on AQ and cannot rule out consumers who misbehave.
    Are there better ways to handle multiple types of consumers on a single physical queue ? I need to be able dequeue specific consumer types if necessary, and this has to be
    done in a performant manner.
    Other alternatives I can think are
    1. Using a multi consumer queue such that there is one subscriber for each message
    type. Use multiple agent sets in a listen method to listen to messages and then
    control what agents we pass into listen method.
    Any pattern suggestions welcome.
    Thanks
    Vijay

  • I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

    I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc.  But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

  • How do I export v-card formatted files for use with either Numbers or Excel?

    How do I export v-card formatted files for use with either Numbers or Excel?

    Did you open Automator and just look around?
    Actions are listed in the left pane.
    You drag them into the workflow on the right in the order you need to process the items that you want.
    If this is a on-off requirement, just make a Workflow. If you plan to use it often, make it an Application.
    If you want to select the contacts you want to export, use a get Selected action. You'd then select the contacts in Contacts App before running the workflow.
    I'm not on a Mac to take screenshots, so you'll have to look at Automator's help or google for more info.

  • Does querybuilder support non-english character?

    I want to make query using querybuilder with non-english character (Chinese)?
    I tried with http://localhost:4502/libs/cq/search/content/querydebug.html but it is not working.
    below is my query string:
    property=contenttext
    property.value=你好嗎
    I have converted the chinese character (你好嗎)to unicode.
    Can anyone help me?

    That's a bug in the debugger UI. But it's easy to fix:
    in crxde lite, overlay /libs/cq/search/components/querydebug/querydebug.jsp by copying it to /apps/cq/search/components/querydebug/querydebug.jsp
    open /apps/cq/search/components/querydebug/querydebug.jsp
    find the line "props.load(new ByteArrayInputStream(queryParam.getBytes("ISO-8859-1")));"
    and replace with "props.load(new StringReader(queryParam));"
    Will be fixed in 5.6.1.

  • How does one sync music from iTunes on a Mac with an HTC Windows 8 phone

    How does one sync music files from iTunes running on a MacBook Pro with an HTC Windows 8 phone?

    One doesn't.
    Itunes syncs with Apple devices.
    You can put the music on your phone. You would have to read the directions for your iphone to learn how to put your music on it.

Maybe you are looking for

  • Unable to view data in designer.

    Hi, I have successfully imported metadata into the designer in ODI but when I attempt to view the data in the table I get an error message : "There is no connection for this logical schema/context pair: XXX_src_Schema / GLOBAL" I am having trouble tr

  • " ! Cannot send message - Message has no valid recipient "

    Android version 4.4.4 Sony Xperia Z3 Compact When I use the pre-installed Messaging app I get the following error message for some but not all contacts " [!] Cannot send message  Message has no valid recipient " I can't work out what is is about the

  • ORA-01116 - I've deleted a dbf file

    Hi, I tried to shutdown immediate the server. This is hanging. Can someone help? thx

  • File renamed when I add label

    Bridge CS3 v2.1.1.9 is frequently renaming files when I add a label. When it renames the file it adds "._00_" as a prefix to the file name. I then don't see the file in Bridge. I have to go to Windows Explorer to find it. It is doing this to about a

  • WRT54GS Ver.6 responds to ping

    Hi, just got this router from PC World. I have set Block anonymouse internet requests under firewall, but i can still get a response back! Can anybody advise, other topics been posted but no definite answers! Firmware is 1.50.6 - I see no v6 upgrades