How does one make a new purchase of TCS 4?

How can I make a new purchase of TCS 4?

You probably can’t unless you’re a member of the volume licensing group – they can get older versions of software.

Similar Messages

  • How does one manage these new render setting for previews?

    I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video.  Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
    I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor? 
      

    Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
    These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
    “As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
    ·        The "Watchout"  playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
    ·        The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
    ·        If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
    Thanks for your help!

  • How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    Thanks for the additional information.
    Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
    Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
    If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
    If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

  • How does one make CC the default out of ACR rather than CC 2014?

    I installed the updates for PS CC and PS CC 2014.  Now, when opening a file out of ACR, it defaults to CC 2014.  How does one set things so that it opens in CC rather than CC 2014?

    GB has two "modes": In "musical time" the units of the timeline are bars and beats, in "real time", they're seconds. You can switch between them by clicking the clock/note symbols near the play button.
    "Snap to grid" only works in the musical time mode.
    An Apple Loop is always supposed to be an integer number of measures long. So if you're in 4/4 it can be 1, 2, 3 ... measures (which is 4, 8, 12 ... beats) long. Since the concept of loops is to be in rhythm with the beat of your song, this makes sense - so it is assured that the "one" of a drum loop, e.g., always sits on the "one" of a measure.
    If your loop is only half a measure long, you can double it to make a full bar. If your loop is not in rhythm at all with a beat - well, then it probably doesn't make sense to turn it into a loop that adjusts to the tempo in the first place. You can still turn it into a "static" kind of loop.

  • How does one transfer an app purchased on an iMac to an iPhone?

    How does on transfer an app purchased via iMac to an iPhone or iPad and why isn't this info presented when the purchase is made?

    On the left Sidebar, it's under Devices when you connect iPhone to computer iTunes.
    If iPhone not recognise on Mac iTunes :
    Mac: http://support.apple.com/kb/TS1591

  • Hi. how does one make sure photos have been uploaded to I cloud

    trying to update to IOS 8 on my iphone 4s from IOS 7.1.2. cannot due to storage requirements. asking me to delete items. what should I do?  most are photos  how do I make sure they are now in cloud and can be safely deleted from phone storage.

    Be very careful.
    Only the last 1000 photos maximum are stored in iCloud and for a maximum of 30 days.
    In the new version of iCloud Photo Library (which is in Beta) it will keep all photos, but you are not using that version yet as you need iOS 8 installed to do that.
    The best thing to do is connect your iPhone to your computer and transfer the photos from the photo to your computer.
    The instructions on how to do it are here:
    Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC

  • How does one make a PLAF

    I understand that to make a custom LAF, all you need to do is extend one of the standard LAFs, but how do you describe how things are to look (and feel)? What I mean is if you want you text fields to have rounded corners, how do you go about having it show up in such a way?

    I don't know if this will help, but since you mentioned it will be an app mostly used on a Windows platform, I figured I'd mention this. By default swing uses the MetalLookAndFeel. But the sdk comes with other look and feels. There is one for Motif and Windows (the windows one only works on Windows platforms "for copyright reasons, it does not run on any other operating system" - Java Foundation Classes in a Nutshell). Now if you want a quick and dirty way to change the look and feel of everything to look like windows, try this.
    When you start your app, instead of using a bare java invocation, try
    java -Dswing.defaultlaf=com.sun.java.swing.plaf.windows.WindowsLookAndFeel yourAppHere
    you also might want to poke around the javax/swing/plaf/metal subdirectory of the source shipped with the sdk. Metal is the default theme, as I mentioned, and all the functionality is in the classes contained in that directory. Hope this helped.
    - Anthony

  • How does one make Flash dissolve to a URL redirect or better yet, make window go away

    Have flash installed - works great - except I want it to resolve to different URL when finished.  A second option is to see the window go away and the HTML appear underneath.
    I have already used the transparent and this does not work.  For some reason, it makes its own window and pushes the HTML down and after it runs, one must scroll down to read the index page.
    See code  it at spccsp.com

    you can fade anything in flash with actionscript.  but to fade the browser window that contains flash and your popup (or popunder), you'll need to use javascript and/or dhtml or something else and the browser fades are problematic if you want your code to work across a range of browser types.

  • How does one make very large brush strokes of several inches wide. I could do this in the previous version of Apurture.

    I just upgraded my Aperture app but now it will not allow me to make inches wide brush strokes when I need to lighten, darken or other adjustments. In the previous version I could make inches wide adjustments. I really need to do this again. How can I do this?

    The brush size is measured in pixels.  The maximum is 1,000 px.  If you have any pixel-filtering turned on, the maximum size drops to 200 px.  In the Brush HUD, make sure "Detect Edges" is un-checked, and that "Brush Range" is "All".

  • HT1731 How does one configure a NEW (unconfigured) AirPort Express to join a WiFi network that has a non-broadcasted SSID?

    The following KB article assumes that the user has a configured AirPort Express:
    http://support.apple.com/kb/HT1731
    I reset my AirPort Express, because the SSID of the WiFi network changed and its name is not broadcast for security reasons.
    When using the "AirPort Utility" ( not the "AirPort Admin Utility" – which is the wrong name of the application in the article! ) the application found the unconfigured AirPort Express, connected to the LAN via ethernet; However, when selected, the configuration "wizard" assumes that the user wants to configure the AirPort Express as a WiFi base station.
    I selected the option to have the AirPort Express join a WiFi network; However, the AirPort Utility sent back an error, saying that a "Base station" ( WiFi network?! ) could not be found. Well, guess what? That's because the SSID of the network I want the AirPort Express to join.
    UGH! 
    ...and the best part is that there is no other solution, but to run with the AirPort Utility's assumptions, configure the AirPort Express as a WiFi Base station, then follow the KB article's instructions ( which are not accurate ) to re-configure the AirPort Express as a WiFi client.
    This is a really bad user experience, Apple.
    Please try following your own instructions to see how fantastically they fail..then, re-write your KB articles.
    Thanks,
    PS — If anyone knows of any easier methodologies, do tell. (That's the "question" part of this inquiry )
    PPS — My Mac Pro, which I used to configure the AirPort Express, does not have WiFi.
    PPPS — Why do all the articles that match searches for "AirPort Express" return articles that refer to "AirPort Base Stations"?!  Please, for the love of UX, be consistent!

    Here are the basic steps:
    Run the AirPort Utility
    Select the AirPort Express
    Click on Manual Setup
    Click on the AirPort icon
    Click on the Wireless tab
    For Wireless Mode, select the "Join a wireless network" option
    In the Wireless Network Name field, enter the SSID of the hidden wireless network you want the Express to join.
    Select the approrpriate wireless security type in the Wireless Security window.
    Enter the appropriate wireless security password for the hidden network.
    Click on Update.

  • How does one make next_record built-in working automatic?

    I made that table :-
    CREATE TABLE DT
    (DD DATE DEFAULT sysdate NOT NULL);
    and in forms 6i , I made simple form to it , and it's working correctly , but I want after I post the date in the text item go automatic to the second record to post in it the second date , and so on ......
    I tried next_record in WHEN-VALIDATE-ITEM but didn't work .
    so ....... is there anyway to make this idea working ?!
    PS : I upload the fmb file to test it if you would..... download it from that link :-
    http://www.zshare.net/download/13050755af4936b8/

    There is no navigation in validation-triggers. The reason is: It depends of the outcome of the validation wether you are allowed to leave the item or not.
    If you want to navigate to the next record you may look at the block-property "navigation style". Setting this to next_record lets the cursor move to the next record after validation of the last item.
    Wolfram

  • How does one make the xdp to pdf document editable?

    I have a document process whereby the document renders, but the user cannot edit the document.
    How do I change the xdp so that the rendered document will be editable by the end-user?
    Thanks!

    Is the user trying to edit the document using Adobe Reader?
    If yes, You need to reader extend the PDF in order to enable users to edit the PDF using Adobe Reader.
    You can Reader extend PDF using Acrobat or LiveCycle server depending up on the volume or usage.
    Please go through this blog to understanding the licensing of Reader Extensions http://blogs.adobe.com/livecycle/2013/05/understanding-reader-extensions-licensing.html
    --Santosh

  • How does one MAKE a LIBRARY for GARAGE BAND to IMPORT?

    I have been looking for some kind of SDK that would allow the creation of a library for GB and allow the sharing of libraries that multiple production teams can use.

    So then your question is: How do I script an Installer (?)
    More often than not, companies simply create a Disk Image because all you need to install a group of loops is to drop their folder on the GB Loop Browser. That's it.
    The Jam packs install a lot more than just loops, so an Installer is required. Adding loops is so simple it's generally hard to justify the extra effort and man power.
    However, if you really want to go through the extra effort, and for whatever reason, your project actually requires it, then you might want to become an ADC member:
    http://developer.apple.com/products/

  • How does one make a desk top icon from a page/site being viewed? (send to desktop)

    (send to desktop)

    Hi trevor12, you mean screenshot ?
    see: [https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem?s=how+to+take+screenshot+in+fireox&r=0&as=s How do I create a screenshot of my problem?]
    see also: [https://support.mozilla.org/en-US/kb/create-desktop-shortcut-website Create a desktop shortcut to a website], if this helps.
    thank you

  • After Installing Drivers, how does one make trackpad work?

    I followed the instructions about making sure the upgrade driver was loaded, but I can't make my trackpad (macbook Alu) do any thing except click/double click. Any ideas?
    Thanks

    If things are installed correctly, the trackpad settings are in the Boot Camp Control Panel icon (the grey diamond in the taskbar). The options are limited to controlling tap click, double-tap right-click, and dragging.
    I've been looking for a way to adjust the click sensitivity (double-tap is a bit too sensitive) but I can't seem to find a setting for it.

Maybe you are looking for