How does one manage these new render setting for previews?

I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video. Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor?

Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
“As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
·        The "Watchout" playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
·        The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
·        If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
Thanks for your help!

Similar Messages

How does one install non-English character sets for use with the "find" function in Acrabat Pro 11?

I have pdf files in European languages and want to be able to enter non-English characters in the "find" function. How does one install other character sets for use with Acrobat Pro XI?

Have you tried applying the update by going to Help>Updates within Photoshop Lightroom? The update should be using the same licensing? Did you perhaps customize the installation location? Finally which operating system are you using?

This pop up box which tells me everything that I scroll over. How does one turn these off?

So my daughter got on my mac and turned on this ID box which tells me what everything is that I scroll over. How does one turn these off?

Turn off VoiceOver in the Universal Access pane of System Preferences.
(62639)

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

How does one make a new purchase of TCS 4?

How can I make a new purchase of TCS 4?

You probably can’t unless you’re a member of the volume licensing group – they can get older versions of software.

Excel activex call changes between Office 2000 and Office XP. How does one manage that?

I have several Active X calls from within a VI. One in particular is
the Excel Cell Value property node in Office 2000. MS has decided to
call it Excel Cell Value2 in Office XP.
I have built and exe on a machine with Office 2000 and can run the code
on a machine with Office XP, but I can not build on the machine with
Office XP. I can also run a VI with that call
on the Office XP box, but if I mass compile the VI I get the broken arrow.
I guess I am confuesed as to why it can run but not compile. If the
ActiveX call is not there for the compile why is it there for the run?
If I can expect this does it work in reverse where I
build on an Office XP box and run on a Office 2000 box?

These problems you are experiencing do stem from the ActiveX changes between Excel versions. When you mass compile LabVIEW checks to see if everything is linked correctly, including ActiveX portions of your code. Since there are slight changes the LabVIEW compiler detects something is wrong, but cannot isolate the problem. You might need to force a recompile of that VI. Check out this link.
http://digital.ni.com/public.nsf/websearch/50D06DEE8B9DC018862565A0006742F2?OpenDocument
Hope this helps!
Andy F.
National Instruments

How does one manage function sounds on the MacBook Pro?

I cannot stand the cute little "twinkle" sound made when I save a document, but don't want to mute the machine in order to avoid it -- I want to turn it off or at least substitute something else. How?

You may want to try deleting the file com.apple.soundpref.plist, then resetting your sound preferences.
The file is located here: Mac HD/Library/Preferences. There may also be one here: Mac HD/Users/youraccountname/Library/Preferences. Delete both, if both are present.

HT1731 How does one configure a NEW (unconfigured) AirPort Express to join a WiFi network that has a non-broadcasted SSID?

The following KB article assumes that the user has a configured AirPort Express:
http://support.apple.com/kb/HT1731
I reset my AirPort Express, because the SSID of the WiFi network changed and its name is not broadcast for security reasons.
When using the "AirPort Utility" ( not the "AirPort Admin Utility" – which is the wrong name of the application in the article! ) the application found the unconfigured AirPort Express, connected to the LAN via ethernet; However, when selected, the configuration "wizard" assumes that the user wants to configure the AirPort Express as a WiFi base station.
I selected the option to have the AirPort Express join a WiFi network; However, the AirPort Utility sent back an error, saying that a "Base station" ( WiFi network?! ) could not be found. Well, guess what? That's because the SSID of the network I want the AirPort Express to join.
UGH!
...and the best part is that there is no other solution, but to run with the AirPort Utility's assumptions, configure the AirPort Express as a WiFi Base station, then follow the KB article's instructions ( which are not accurate ) to re-configure the AirPort Express as a WiFi client.
This is a really bad user experience, Apple.
Please try following your own instructions to see how fantastically they fail..then, re-write your KB articles.
Thanks,
PS — If anyone knows of any easier methodologies, do tell. (That's the "question" part of this inquiry )
PPS — My Mac Pro, which I used to configure the AirPort Express, does not have WiFi.
PPPS — Why do all the articles that match searches for "AirPort Express" return articles that refer to "AirPort Base Stations"?! Please, for the love of UX, be consistent!

Here are the basic steps:
Run the AirPort Utility
Select the AirPort Express
Click on Manual Setup
Click on the AirPort icon
Click on the Wireless tab
For Wireless Mode, select the "Join a wireless network" option
In the Wireless Network Name field, enter the SSID of the hidden wireless network you want the Express to join.
Select the approrpriate wireless security type in the Wireless Security window.
Enter the appropriate wireless security password for the hidden network.
Click on Update.

HT1420 How does one authorize a new computer?

iTunes help is anything but. Instructions are to go to "Store" and select authorize this computer but there is nothing close to that choice. It seems that this should be doable from the account settings.

The Store menu is at the very top of the screen on a Mac and at the top of the iTunes application window in Windows.
(69223)

How does one install Firefox on Windows 7 for just one user, so separate users can have completely independent Firefox installations?

I'd like to create a new user, and install firefox for that user completely separate in all respects from the existing user's installation, so that there is no interaction at all between the two installations, with separate copies of the program files as well as separate Firefox profiles.

I was asking about how to have multiple Windows user accounts, and how to install Firefox independently for different Windows user accounts.
Firefox does not ask if you want to install it for everyone or just the current user, unlike many programs.
I tried switching to the newly created Windows user account, which was able to use the Firefox installed by the other user account, and installing Firefox, and although there's no indication that it's installing a user specific copy of Firefox, it is. Now the original user account sees it's installation of Firefox and the second user account sees it's installation of Firefox and no longer runs the first users installation of Firefox.
Creating separate Firefox profiles is what I was trying to say I didn't want to do. That's why I mentioned wanting completely separate copies of the program files, not one copy of the program files running two instances simultaneously.

How does one create a LabView-native object for interfacing to custom H/W?

I have created an API to some custom hardware.
I've created both C-dll and .NET Assembly, and I can create VIs using either.
However, for programmer simplicity, I'd much prefer to offer LabView support in the form of a LabView-native object.
I've considered doing it via a sub-VI, but I'd really prefer a native object.
Questions:
1) What is the correct/proper name for a such a native LabView object that wraps the API to my custom hardware device?
2) What language is this thing written in?
3) Can I write this thing, or can NI only create such a thing?
4) If i can write it, where can I obtain the SDK for creating it?
Many thanks,
-Dave
Solved!
Go to Solution.

Yes, removing the block diagram obscures the code so much that not even newer versions of LabVIEW can make sense of it.
I think under the hood it must be converting it to Perl.
Spoiler (Highlight to read)
If you believe this and have lots of money please contact me with your credit card info
If you believe this and have lots of money please contact me with your credit card info
=====================
LabVIEW 2012

How does one delete all information on iPhone for resale

I also want to put all current information on new iphone 4s

Gord-
First do a final sync of the old phone. Then hook up the new one and restore (it will take quite a while). You can then just reset the old one to factory settings.
Others do a back up, then use find my iphone to delete all data, then plug in new one and do the restore on that phone.
Both ways work fine.
Cheers,
Tom

HT1349 how does one turn on the ring tone for the iPhone 4s

hy, i just purchased a new i phone and my ring tone will not work and neather will my message reminder. wheh i go into settings i press sounds but abovt the word vibrate is the word silent even though all my ring tone and message tones are set.

Check to see if you have flipped the ring/silent switch on the left side of the phone above the volume up button. (If it is red, your phone is on Silent.) The setting you see determines whether or not your phone will vibrate when this switch is set to Silent. If Vibrate is set to On below this it means that the phone will vibrate when the switch is flipped to the Silent (red) position.

How does a customer request new Driver support for BOE XI 3.1?

Hello:
I would like to know the process to request product enhancements/feature support?
We are running BOE XI 3.1 on HPUX-IA64 going to Neoview 2.4.
I would like to know how to request support for the HP Neoview JDBC driver.
What is the process?
Currently as of SP3 the platform support doc only has HP ODBC 2.4 listed.
Thanks,
Dwayneat

Hi,
Raise a ticket with SAP support.
-Gokul.

How does one create a fillable/editable PDF for end users of Adobe Reader?

An example would be a business card design where users could change the name, email, etc. I am working in Acrobat Pro X, In Design 5.5, etc on a Mac. I know it's possible b/c I've seen it done. Need fonts to be embedded. I've tried various things but nothing has worked. Any advice would be greatly appreciated.

Hey Sara,
For a better understanding on how to create fillable PDF form using Acrobat X, please watch this video tutorial:
How to create a fillable PDF form | Acrobat X Tips & Tricks | Adobe TV
Also, please watch the following video tutorial on how to embed fonts in a PDF:
https://acrobatusers.com/tutorials/how-to-embed-fonts-in-a-pdf
I hope both the tutorial links mentioned above would help you
Let me know if you need further assistance.
Regards,
Anubha

How does one manage these new render setting for previews?

Similar Messages

Maybe you are looking for