How does one publish their calendar from the new mountain lion cloud through iWeb? seems like this functionality has been dropped.

how do you publish calendar under new mountain lion cloud. seems as though this functionality has been lost.

There was never a functionality to publish a calendar thru iWeb.
You could publish a calendar, 100% independent of iWeb, and display it in a browser window.
Then you could display that window in an iWeb HTML Snippet.
how do you publish calendar under new mountain lion cloud.
I recommend asking in either the iCloud or the Mountain Lion forum.

Similar Messages

How does one sync their calendar on the phone to the calendar on outlook??

How can I sync my calendar from outlook to match my calendar on IPhone and vice versa? Also how do I make sure what is in the icloud is the right info??

Select it in the iphone options.
Select your iphone on the left in itunes, then select the info tab and then choose the calendars, contacts, emails etc you want to sync.

Is anyone having problems with the Notes feature in the new Mountain Lion OS? When I open this feature it begins to pinwheel and then it closes and I get an error message!

I am getting an error message when opening Notes with the new Mountain Lion OS. When it opens it begins to pinwheel and then it closes and an error message box opens up. Is anyone else having this problem?

Try this: http://forums.adobe.com/message/2796075

How do i turn off messages with the new mountain lion os?

My husband and I share an Apple ID. When I use the iMessages on my MacBook it send them to both of our iPhones. How can I turn this off on my computer?

While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion

How does one erase their email from firefox sync or get a regenerated recovery key if they deleted their account info?

I set up a sync account long time ago and lost my recovery key. I read that if you delete your sync account, it would remove all data. I tried to create a new account but I keep getting the error that my email is already being used. Then I read how to regenerate a new recovery key, but I can't complete the task because my account info has been deleted. How is my account deleted and my email is still showing as an active sync account? Is there a way to recover my email with out having to recreate a new sync with a new email address?

Okay, I am thouroughly annoyed right now because, as I mentioned earlier, I had deleted my account and it still wanted to say that my email was active. Going against all means of logic, I used my email to reset my password (which recreated my ability to login), logged in, and deleted my account (again) and that seemed to do the trick. Why didn't it just do that in the first place?
Oh well, at least it is working now.

How does one see what tasks starts when on Mountain Lion?

I have had a beachball problem for a number of weeks now, and still can not figure out what is going wrong after four separate Support Desk people and one Genius Bar visit -- maybe you, my friends in the Apple Support Communities, can help decypher this.
Symptoms:
Invariably, my MacBook Pro (MacBookPro8,2) with Mountain Lion (10.8.2) -- after exactly one hourof work (59 minutes, 58 seconds and then...) suddenly goes into beachball mode. No warning -- no new processes -- nothing but the beachball on the dialog I am working on. Within the next minute, all dialogs are unresponsive and I have to hard reboot my computer.
What is surprising is that when the beachball happens and I restart the system, all of my cookies (e.g., my Facebook login cookie, my Google 2-factor) and other status bookmarks (e.g., where the video stops on iTunes) disappear.
And if I wish to prolong my computer time, I have to put the computer in Sleep Mode for about 5 minutes, come back and get an additional hour of work before the beachball returns.
Scarily, I have watched it happen - and tracked the Activity Monitor and see nothing that pops up at that time point. No additional memory taken, no additional CPU -- nothing.
What is surprising is that when the beachball happens and I restart the system, all of my cookies (e.g., my Facebook login cookie, my Google 2-factor) and other status bookmarks (e.g., where the video stops on iTunes) disappear.
Additionally, when I boot in Safe mode - my 16G of RAM is almost totally taken up (15.1Gs) by nothing. Simply that 15.1Gs are "wired". The largest process is the mds - and that is only 500M.
Prior Efforts:
I have inspected the disk with Disk Utility, done both the Internet Hardware check (since my Recovery partition did not have it) and at the Genius Bar (with their super-special hardware check) and no problems. I have removed Launch Agents and Launch Daemons. I have removed startup items and purged the drive.
I keep being told I will have to erase and reinstall, but I think there is something much simplier here: some software that is being triggered to do something one hour after awaking from sleep.
I saw some people suggest it could be f.lux, but I have turned it off and it still happens. Additionally, one of my people suggested it was the Time Machine, so I turned it off -- and it still happened.
Any ideas what could be the problem?
As per everyone else, here is my EtreCheck:
Hardware Information:
          MacBook Pro - model: MacBookPro8,2
          1 2.5 GHz Intel Core i7 CPU: 4 cores
          16 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6770M - VRAM: 1024 MB
Startup Items:
          ChmodBPF - Path: /Library/StartupItems/ChmodBPF
          HWNetMgr - Path: /Library/StartupItems/HWNetMgr
          HWPortDetect - Path: /Library/StartupItems/HWPortDetect
          MySQLCOM - Path: /Library/StartupItems/MySQLCOM
          VirtualBox - Path: /Library/StartupItems/VirtualBox
          ZendServer_init - Path: /Library/StartupItems/ZendServer_init
System Software:
          OS X 10.8.2 (12C60) - Uptime: 0 days 0:10
Disk Information:
          M4-CT512M4SSD2 disk0 : (512.11 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 511.25 GB (78.47 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Western Digital My Passport 07AE 500.07 GB
                    disk1s1 (disk1s1) <not mounted>: 209.7 MB
                    Recovery HD (disk1s2) <not mounted>: 650 MB
                    Backup Disk (disk1s3) /Volumes/Backup Disk: 494.59 GB (138.75 GB free)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          DisplayLink UV195
          Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
          com.avatron.AVExVideo          Version: 1.7
          com.displaylink.driver.DisplayLinkDriver          Version: 1.8
          net.telestream.driver.TelestreamAudio          Version: 1.0.5
          com.vara.driver.VaraAudio          Version: 1.0.3
          com.avatron.AVExFramebuffer          Version: 1.7
          org.virtualbox.kext.VBoxDrv          Version: 4.2.4
          org.virtualbox.kext.VBoxUSB          Version: 4.2.4
          org.virtualbox.kext.VBoxNetFlt          Version: 4.2.4
          org.virtualbox.kext.VBoxNetAdp          Version: 4.2.4
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
                 [loaded] com.adobe.fpsaud.plist
                 [loaded] com.displaylink.usbnivolistener.plist
                 [loaded] com.fitbit.fitbitd.plist
                 [loaded] com.github.GitHub.GHInstallCLI.plist
Launch Agents:
                 [loaded] com.adobe.CS5ServiceManager.plist
                 [loaded] com.displaylink.useragent.plist
User Launch Agents:
                 [loaded] com.facebook.videochat.sanford.plist
                 [loaded] com.google.GoogleContactSyncAgent.plist
                 [loaded] com.hp.printerAgent.plist
                 [loaded] com.macpaw.CleanMyMac.helperTool.plist
                 [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
                 [loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
          Flux
          Alfred
3rd Party Preference Panes:
          Air Display Preferences
          DeployStudioServer
          DivX
          Flash Player
          Flip4Mac WMV
          Growl
          MenuMeters
          Perian
          Web Sharing
Internet Plug-ins:
          AdobePDFViewer.plugin
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          Google Earth Web Plug-in.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          OfficeLiveBrowserPlugin.plugin
          OVSHelper.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          Anystream.plugin
          CitrixOnlineWebDeploymentPlugin.plugin
          fbplugin_1_0_3.plugin
          Picasa.plugin
          WebEx64.plugin
Bad Fonts:
          None
Top Processes by CPU:
               3%          DisplayLinkManager
               3%          WindowServer
               2%          EtreCheck
               1%          DashboardClient
               1%          fontd
               1%          SystemUIServer
               0%          Finder
               0%          Flux
               0%          mds
               0%          zdd
Top Processes by Memory:
          262 MB          mds
          131 MB          WindowServer
          98 MB          Dock
          49 MB          com.apple.dock.extra
          49 MB          DisplayLinkManager
          49 MB          mysqld
          49 MB          Finder
          49 MB          Google
          33 MB          java
          33 MB          coresymbolicationd

Uninstall CleanMyMac and reinstall the OS. You've likely "cleaned" something you should not have.
If CleanMyMac removes uneeded languages from applications, reinstall the applications. Some do not function well when you remove them.
You also have a ton of other third-party stuff which could be causing the problem.
ChmodBPF - Path: /Library/StartupItems/ChmodBPF
          HWNetMgr - Path: /Library/StartupItems/HWNetMgr
          HWPortDetect - Path: /Library/StartupItems/HWPortDetect
          MySQLCOM - Path: /Library/StartupItems/MySQLCOM
          VirtualBox - Path: /Library/StartupItems/VirtualBox
          ZendServer_init - Path: /Library/StartupItems/ZendServer_init
Launch Daemons:
                 [loaded] com.adobe.fpsaud.plist
                 [loaded] com.displaylink.usbnivolistener.plist
                 [loaded] com.fitbit.fitbitd.plist
                 [loaded] com.github.GitHub.GHInstallCLI.plist
Launch Agents:
                 [loaded] com.adobe.CS5ServiceManager.plist
                 [loaded] com.displaylink.useragent.plist
User Launch Agents:
                 [loaded] com.facebook.videochat.sanford.plist
                 [loaded] com.google.GoogleContactSyncAgent.plist
                 [loaded] com.hp.printerAgent.plist
                 [loaded] com.macpaw.CleanMyMac.helperTool.plist
                 [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
                 [loaded] com.macpaw.CleanMyMac.volumeWatcher.plist

Using a PCI-6534 card, how does one write and read from the board simultaneously after being triggered on the StartTrig input ?

I've copied two NI-developed VI's into a single VI. The first VI is the LV 'Buffered Pattern Input-Trig VI' under examples/daq/digital/653x. Using an external data generator, I send it a pulse on StartTrig, a clock on REQ1 and data on DIOA0. The start pulse is negative going so I set the front panel input to trigger on "falling edge" with clock set to 'external'. This VI is configured as Port 0 and Group 0. Once this VI is triggered I need to then start another VI which is simply the Buffered Pattern Output VI that also ships with LV. This VI is configured on Port 2, Group 1. This VI is used to simply send out a previously d
efined array of data on DIO C0, C1 and C2.
So, I receive a Start Trig, then clock in data, and then immediatly want to send out data. My problem is that I can't figure out when my receiving VI gets triggered on the StartTrig input. If I know when the trigger occurs, then I can wire this condition to a case statement and activate the second, or write VI. Without having the Trigger condition be met to enable the output VI, the problem is that it always outputs without even be triggered. So, where or how do I tap to find out when the StartTrig happens ? In other words, how do I know when the receiving VI has received a StartTrig pulse. There's got to be a way to do this, and I need to run in continious mode, so I can keep receiving and sending out data over and over again. Any ideas ? If your answer is to look at the examples, please tell me exact and specific examples, because I have not been able to find any examples directly related to my goal. thanks.
Kirk

Nestor-
I tried your first suggestion of connecting ACK1 to ACK2. But, I get Error 10010 at Digital Buffer Control when I run the VI. I've added an array of 32 ones and zeros to the output VI so that I have some data to write. What's really interesting is when I have a scope probe on ACK1 and ACK2 which are now common, the voltage level is less than 5 volts, around 4.7, but there is something wrong with the signal, a few spikes, I've seen this before, like 2 signals are trying to drive the same output or something. When I remove the connection between ACK1 and ACK2 the signal looks perfect since ACK1 is being driven by my data generator. This leads me to believe that you can't connect ACK1 to ACK2, or atleast you can't do it with the way I have the VI'
s configured. Also, I have a scope probe monitoring DIOC0 (since I'm writing to Port 2,which is Port C) and I don't see any data coming out, which makes sense since I get the error mentioned above.
In terms of my configuration, I have 2 VI's on the block diagram. I have Buffered Pattern Input-Trig.VI with the following settings:
Group: 0
Device: 1
Port List: 0
Buffer Size: 1000
Clk Soruce: External
Trigger Type: Start Trigger
Trigger Condition: Trigger off Falling Edge
# of pretrigger points: 0
For the 'writing VI' I copied the Buffered Pattern output-Trig.VI with the following setup:
Device: 1
Group: 1
Port List: 2
#of updates: 1000
Clock Source: Internal
Trigger Condition: Trigger on falling edge
So, do you have any ideas on what might be wrong ? Just realized that I can attach files, so my VI is attached.
thanks.
Kirk
Attachments:
input_output_at_the_same_time.vi ‏164 KB

How does one cancel a purchase from apps store

how does one cancel a purchase from the apps store?

Purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the worl

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

How does one email a video from iPhoto

how does one email a video from iPhoto

One doesn't.
Simply, sharing video via email is not advisable.
Many email services have an attachment limit of 20mb and some a limit of 10mb. As emails are sent through an array of relays, the effective limit is the smallest file size allowed on any of the relays. That means that video is rarely suitable for emailing.
Then there's the whole issue of Codecs and not all machines will have the codecs to play all videos. Plus, folks with slower connections can find it very inconvenient to download large video files.
Finally, sharing video from iPhoto via email is not supported. All that gets you is the Movie thumbnail. If you feel you must share via email then you'll need to export the video first, and attach that. Use the File -> Export command and set the kind to Original.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
Other than that your options include:
Upload it to a sharing site like YouTube or Vimeo and email a link - these will allow the recipient to view the material online. That will avoid the codec issues mentioned, and the person can still download the video file if they wish.
Upload it to sharing services like Dropbox or YouSendIt and email a link. This will require that they download the material to their machines to view.
Regards
TD

How does one create their own interpolation

I am currently working on a tile-based environment in which the user controls a tank. I have been attempting to use interpolators to smooth out the movement between tiles, but I have had a lot of trouble acheiving the desired effects. From what I have gathered from various posts is that the interpolator classes are only useful for repeating animations (please correct me if this statement is wrong).
My question then is:
How does one create their own or methods which simulates the interpolation behavior; I am particularly interested in the PositionInterpolator for translating the missles fired by the tank.
I attempted to do this several times, but I have failed. Here is one of my attempts:
public void fire()
     show(); //show the missle geometry
     int TRANSLATION_TIME = 1000; //blast alive for 5 seconds
     float DISTANCE = 20.0f; //missle travels a distance of 20 units
     //interpolate path
     long startTime = System.currentTimeMillis();
     long endTime = startTime +TRANSLATION_TIME;
     long interval = endTime - startTime;
     float translationPercent;
     float lastTransPercent = 0;
     float dist;
     Transform3D translate = new Transform3D();
     while(System.currentTimeMillis() < endTime && !collision)
     interval = System.currentTimeMillis() - startTime;
     translationPercent = (float)interval/TRANSLATION_TIME;
     dist = DISTANCE*(translationPercent - lastTransPercent);
     lastTransPercent = translationPercent;
     translate.setTranslation(new Vector3f(0.0f, 0.0f, -dist));
     interpolate(translate);
public void interpolate(Transform3D translate)
     Transform3D t3d = new Transform3D();
     missleTG.getTransform(t3d);
     t3d.mul(translate);
     missleTG.setTransform(t3d);
What happens using this code is that the missle just waits at its initial location until the TRANSLATION_TIME has passed, and then jumps to the final position -- the missle does not smoothly translate to the final location. Are there any explainations out there for this behaviors.
-Thanks in advance

Hi,
I'm also working on a game environment where the user can move around in a spaceship and fire missiles etc...
I haven't looked much at interpolators, but I use Behaviors for everything I need to move/rotate/scale...
You can for example create your own behavior (by extending the Behavior class) and set it up to move the missile when you press a specific key, or when any other kind of event takes place...
You should check the documentation for the Behavior class.
Hope this helps...

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac. Now I can't remove her e-mail address from Facebook. It was suggested to me that I try clearing temporary files from Safari but I can't find

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6. Now I can't remove her e-mail address from my computer. When I open Facebook her address shows in the user button. I do not have a Facebook account. It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this. Are temporary files the same as the cache? It also was suggested that I try clearing Safari cache. How do I do that?

Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.

How does one recover lost photographs on the computer?

How does one recover lost photographs on the computer?

My photographs were successfully uploaded to iPhoto when I was forced to restart my computer. When it turned back on again, the photographs were gone from my camera and my computer. I do not know how to restore them from my backup and cannot find the photographs anywhere else. Thank you for your help!

How does one delete VPN configurations in the settings list not used any more?

How does one delete VPN configurations in the settings list not used any more?

Sorted found profiles and delete from there

How does one get tech support from adobe? is there an online "chat" service?

How does one get tech support from adobe? is there an online "chat" service? There formerly was a telephone help service. There is no phone number shown in "help.adobe.com" Has phone support been eliminated as a cost-saving measure?

There is finite help available via chat & phone
http://www.adobe.com/support/download-install/supportinfo/
Many problems can be solved here in the user-to-user forum. Feel free to avail yourself of this opportunity.

How does one publish their calendar from the new mountain lion cloud through iWeb? seems like this functionality has been dropped.

Similar Messages

Maybe you are looking for