How does one resize a quicktime movie -

I am trying to resize a Quicktime movie - from 720 pixels wide to 500 pixels wide - height does not matter. This on for a PC - I know how to do it on a Mac. Thanks

To change the dimensions would require the Pro upgrade. Use the Movie properties window to make the change in the width and check the box to maintain aspect ratio.

Similar Messages

How does one resize a photo to the dimensions required by a contest?

How does one resize a photo in aperture to the dimensions required by contest?

Are you submitting a print or a file?
You set the size of your print in the print dialog.
You set the number of pixels (the unit of linear measurement of digital images is the pixel) for a file when you create that file by exporting an Image from your Library. You can specify a recommended number of Pixels per Inch by using the (mis-named) DPI field in the Image Export Preset you use when you export.
The files you import have a height and width in pixels. Height/width = the Aspect Ratio. You can crop to any aspect ratio using Aperture's Crop tool.
What are the specs required by the contest's sponsors?
Message was edited by: Kirby Krieger -- added aspect ratio and cropping.

Premier After Effects... How does one places the whole movie clip into AF?

After years of using Premiere, I’m looking at using After Effects. Premiere does most of what I need (I don’t need moving graphics and titles) but the masking and rotoscoping seems to be better in After Effects. I’ve started a great video by Tom Green at school. This is probably silly question- I don’t understand is how does one places the whole movie clip into AF? I only see 30 seconds or so of the 5 minute clip on the timeline in AF.

Ahh, thanks. I simply add more minutes (the length of the clip) into the "new composition".
A new problem: When I try a dynamic link with premiere AE says “Failed to connect to adobe Premiere Pro Dynamic Link”, but PP will link with AE. I just installed AF last week. Do I need to uninstall and reinstall them (along with the rest of the Creative Suite)?

I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

Welcome to Apple Support Communities
That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

How does one get i movie to open . . . the "pinwheel" just keeps spinning

How does one get i movie to open? The pinwheel is in a perpetual state of spinning.

Hi,
mFulErr = -41, /*memory full (open) or file won't fit (load)*/
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

How does one get notification of weekly 99 cent movie rental?

I've seen a number of news items saying that customer are being notified via email about a new 99 cent weekly movie rental. I get the iTunes music newsletter every Tuesday, but I see nothing about movies in it. Is there another newsletter for movies, and if so how does one subscribe to it?
Thanks.

Well, last week I saw one movie at this price too, so it didn't start yesterday...

HT4112 how does one navigate with out the use of a mouse? do we still need to use finger to move to different things?

how does one navigate the keyboard without a mouse. Do we still use finger to move from place to place?

Yes you still need to use your finger to do all of the things that you need to use it for even if you use a wireless keyboard. You are merely adding a larger more robust keyboard to the device. You are not replacing the touch gestures features with the use of an external keyboard.

How does one manage these new render setting for previews?

I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video. Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor?


Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
“As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
·        The "Watchout" playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
·        The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
·        If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
Thanks for your help!

Using family sharing, how does one view and download songs from a family member's collection in itunes?

Using family sharing, how does one view and download songs from a family member's collection in itunes?

When you click on your device you are presented with the pages
Summary
Info
Apps
Tones
Music
Movies
TV shows
Books
Photos
To remove Audiobooks depending on the type of Audiobook ie a series of mp3 files you will find under music and probably have to deselect the album name to remove it. I don't have any of these as I download from Audible or I use Audiobook Builder to stictch together mp3 files into m4b files. To find these Click on Books you will immediately see a section for books (in reality ebooks). Scroll down past that and you will see Audiobooks where you can select and deselect. Deselect the required Audiobooks and Click Sync

How does I resize a pdf file page using Acrobat Pro?

In Acrobat Pro, how can one resize a pdf file page (21.38'' x 26.75'') into one measuring 6'' x 9'', to be submitted as the trim size? Is there a feature that allows this to be done? How does one set all print options from the Application print dialog box to enable one to adjust the dimensions of any customized file page?

I want to scale the 21.4'' by 26.8'' content down to one that can be fitted inside a 6'' by 9'' book.
I have this pdf that was created from the InkFlow app, and I'm using Acrobat Pro to merge three files into one (about 300MB), which I needed to submit to Amazon's CreateSpace, but they needed the trim size of 6'' by 9'', while the pdf is 21.4''' by 26.8'', and I can't amend the source file size of the InkFlow files.
I tried fiddling with the Crop and Print options, but I'm unable to resize the pdf to match the trim size. The problem on my side isn't so much on printing but to resize the pdf file page to 6'' by 9'' to satisfy Amazon's requirement for their trim size. Could this be done with Acrobat Pro? The message that appears is: Full print options of Acrobat Pro, set all print options from the Application print dialog box. Thank for the help.

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

How does one perform mailbox to mailbox moving of email messages w/ Messaging 3.X?

How does one perform mailbox to mailbox moving of email messages with Messaging 3.X?

In an ISP environment there are times that a user changes his
login name (his unique identifier in the ISP's network, also used as
his email address) from one value to another. It is very convenient
for the ISP to be able to move messages from the user's old mailbox
to the user's new mailbox when this situation occurs.

With Messaging Server 2.0, this was easily accomplished by simply
moving the mail messages on disk. However, with the added complexity
of Messaging 3.0 where there are back links, reference counts, etc.,
associated with mail messages, moving files on disk from one mailbox
to another is no longer valid.

The MoveUser utility, which is new in MS 3.X, moves messages from
one messaging server to another or from one maildrop path to another.
Can this utility be used to move messages from one mailbox to another?

The answer is yes, it can. The user should be aware that if
duplicate email message id's exist in the mailbox before the
move, the messages related to the duplicate message id's will
be duplicated in the target mailbox.

See the online documentation contained with the product or the
Messaging 3.X Administrator's Guide for exact syntax.

Hi
If I understand you correctly and if you are using Apple Mail version 2.0 or above navigate to /Users/Home folder. The Home folder is the one with the house icon, within that folder you will see a Library folder, within that folder you’ll see a Mail folder, within that folder you’ll see a folder that begins with POP followed by your name, within that folder will be a folder called INBOX.mbox, within that folder is a Messages folder. All the mail that you see within the application are there. They will be numbered and have a file suffix of .emlx. You can move these wherever you like.
If you are using Entourage X, or Entourage 2004 you can easily multiple select mail messages, addresses etc from within the application and drag whatever you’ve selected to wherever you like.
Tony

How do I import a quicktime movie?

Hi,
I think this is a super simple question, How do I import a
quicktime movie onto my page? I presume you go to
insert>media>? not to sure what comes next though? Is it
shockwave,applet,active x or plugin?
Thanks,
Beth H

There's not a default insert behavior for this built into
Dreamweaver, but a
quick search on the Exchange show that there is an extension
for this,
although I've not used it. Do a search for "quicktime" here:
http://www.adobe.com/cfusion/exchange/index.cfm?view=sn120#loc=en_us&view=sn105&viewName=E xchange%20Search
Make sure you set the program dropdown to Dreamweaver to
minimize the number
of hits. Should be the second one on the list: "Insert a
QuickTime Movie,
V1.0.1".
Hope this works for you. There is some additional information
about the
extension on the detail page that you might want to look at
to ensure
everything works properly.
Best regards,
Chris
"befh" <[email protected]> wrote in message
news:eoao6c$84t$[email protected]..
> Hi,
>
> I think this is a super simple question, How do I import
a quicktime movie
> onto my page? I presume you go to insert>media>?
not to sure what comes
> next
> though? Is it shockwave,applet,active x or plugin?
>
> Thanks,
>
> Beth H
>

How does one email a video from iPhoto

how does one email a video from iPhoto

One doesn't.
Simply, sharing video via email is not advisable.
Many email services have an attachment limit of 20mb and some a limit of 10mb. As emails are sent through an array of relays, the effective limit is the smallest file size allowed on any of the relays. That means that video is rarely suitable for emailing.
Then there's the whole issue of Codecs and not all machines will have the codecs to play all videos. Plus, folks with slower connections can find it very inconvenient to download large video files.
Finally, sharing video from iPhoto via email is not supported. All that gets you is the Movie thumbnail. If you feel you must share via email then you'll need to export the video first, and attach that. Use the File -> Export command and set the kind to Original.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
Other than that your options include:
Upload it to a sharing site like YouTube or Vimeo and email a link - these will allow the recipient to view the material online. That will avoid the codec issues mentioned, and the person can still download the video file if they wish.
Upload it to sharing services like Dropbox or YouSendIt and email a link. This will require that they download the material to their machines to view.
Regards
TD

How does one turn off the appletv

How does one turn off an Apple tv? I think it's 3d generation.

If you are at the top level "Home" page, press and hold the Pause Button and AppleTV will shut off after a few seconds.
If you are not yet at the Home page, you can repeatedly press the Menu button to move back up there, or even better press and hold the Menu button to jump back to the Home page no matter how deeply down you've burrowed.
I find it satifying to turn it off when I walk away, but don't know if there's any real advantage compared to just letting it time out as suggested by Kappy.

How does one resize a quicktime movie -

Similar Messages

Maybe you are looking for